-
GEN930 – OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums
$348.00OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums. The bolt-on fuel cell kit comes with drill templates for retro-fit on older vacuums, new vacuums are pre-drilled and ready for installation. The kit includes a 6-gallon Flambeau tank, a heavy duty frame, the required hoses, and all the necessary hardware. Installation of this kit removes the necessity of detatchable fuel cells and any quick-disconnect fittings. Add this item to your new vacuum purchase. Carbon cannister (GEN933) not included. For CARB compliancy add P/N: GEN933 to your order.
-
SCR851 – Sheet Metal Zip Screws.
$245.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 15,000 per package.
-
ZBG004 – 48″ diameter zone bag.
$183.0048″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
DVB106 – Wireless SmartPhone Vane Anemometer
$140.00Wireless/Bluetooth SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB106 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB106 shows airflow in FPM, CFM, CMH, MPS. Use DVB106 to also measure Temperature, Humidity and Air Pressure. Send onsite professional reports from your SmartPhone or Device by email. The DVB106 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to Smart Devices VIA Bluetooth.
-
DPL005 – 1″ diameter duct plugs.
$135.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 3,000 per package.
-
ZBG003 – 36″ diameter zone bag.
$133.0036″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
PAT012 – 12″ x 12″ Cross-Broken Sheet metal duct patch, 25 pack
$131.3212″ x 12″ Cross-Broken Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal with a cross-break for extra strength, and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 10″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. *** Please allow up to 7 days processing for this order. Expedited shipping methods will be honored when the inventory is available, not when the order is purchased.
-
PAT011 – 10-1/2″ x 10-1/2″ Cross-Broken Sheet metal duct patch, 25 pack
$127.6310-1/2″ x 10-1/2″ Cross-Broken Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal with a cross-break for extra strength, and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 8″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. *** Please allow up to 7 days processing for this order. Expedited shipping methods will be honored when the inventory is available, not when the order is purchased.
-
PAT016 – 16″ x 16″ Sheet metal duct patch, 25 pack.
$108.1616″ x 16″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 12″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
PAT001 – 10-1/2″ x 10-1/2″ Folded Edge Sheet metal duct patch, 25 pack.
$104.7410-1/2″ x 10-1/2″ Folded Edge Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle. Perfect for covering 8″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. *** Please allow up to 7 days processing for this order. Expedited shipping methods will be honored when the inventory is available, not when the order is purchased.
-
ZBG002 – 26″ diameter zone bag.
$103.0026″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
GEN007 – Dust Collection Bucket and Clamp
$98.00Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.
-
ZBG001 – 18″ diameter zone bag.
$88.0018″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
DVB105 – Plug-In SmartPhone Vane Anemometer
$88.00Plug-In SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB105 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB105 shows airflow in FPM, CFM, CMH, MPS. Send onsite professional reports from you SmartPhone or Device by email. The DVB105 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to SMART devices via 1/8″ mini-plug.
-
DPL001 – 1″ diameter duct plugs.
$85.001″ diameter duct plugs. These hard plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit flush on flat surfaces and are not compatible with round duct work. 500 per package. *** THIS PRODUCT MAY DELIVER AS A SPECIAL ORDER, EXPECT A LEAD TIME OF 5-7 DAYS *** EXPEDITED SHIPPING WILL NOT BE HONORED FOR THIS ITEM.
-
PAT224-24 – Cammed-PSA Access Door,24″x24″
$83.00Cammed Access Door for Sheet Metal Duct Work. 24″ x 24″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-24 – Hinged-PSA Access Door,24″x24″
$83.00Hinged Access Door for Sheet Metal Duct Work. 24″ x 24″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
TAP006 – 24″ Vent / Grill Mask Tape.
$82.00Vent / Grill Mask Tape. 24″ x 200′ with 12″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
PAT006 – 6″ x 6″ Sheet metal duct patch, 100 pack.
$78.006″ x 6″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 100 pieces. Need to order more than one bundle, purchase 500 pieces for discounted prices. Perfect for covering 2″-4″ Hose Connections, Inspection Access, and Compressed Air and Brush Access Points, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (1 PACKAGE). PHONE ORDERS ONLY, 800-728-3828. ***
-
GEN933 – 400cc Carbon Cannister for CARB Compliancy on 6 Gallon Fuel Cell.
$78.00400cc Carbon Cannister for CARB Compliancy on 6 Gallon Fuel Cell. Add this 400cc carbon cannister to your General, Major, or Ranger vacuum and 6 gallon fuel cell for CARB comliancy.
-
HCT001 – 2″ – 12″ Hole Cutter.
$76.002″ – 12″ Hole Cutter. Cut a perfect circle in up to #20 gauge sheet metal with this tool. Connect your duct cleaning vacuum hose to a round hole with a Snap Adaptor for ideal airflow.
-
PAT224-20 – Cammed-PSA Access Door,20″x20″
$73.00Cammed Access Door for Sheet Metal Duct Work. 20″ x 20″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-20 – Hinged-PSA Access Door,20″x20″
$73.00Hinged Access Door for Sheet Metal Duct Work. 20″ x 20″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT222-24 – Cammed-DT Access Door, 24″x24″
$73.00Cammed Access Door for Sheet Metal Duct Work. 24″ x 24″ Hinged Door is Secured with 4 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT221-24 – Hinged-DT Access Door, 24″x24″
$73.00Hinged Access Door for Sheet Metal Duct Work. 24″ x 24″ Hinged Door is Secured with Two Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT224-18 – Cammed-PSA Access Door,18″x18″
$60.00Cammed Access Door for Sheet Metal Duct Work. 18″ x 18″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-18 – Hinged-PSA Access Door,18″x18″
$60.00Hinged Access Door for Sheet Metal Duct Work. 18″ x 18″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT222-20 – Cammed-DT Access Door, 20″x20″
$60.00Cammed Access Door for Sheet Metal Duct Work. 20″ x 20″ Hinged Door is Secured with 4 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT221-20 – Hinged-DT Access Door, 20″x20″
$60.00Hinged Access Door for Sheet Metal Duct Work. 20″ x 20″ Hinged Door is Secured with Two Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT010 – 12″ x 12″ Sheet metal duct patch, 25 pack.
$59.2112″ x 12″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 10″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
