-
TAP005 – Vent / Grill Mask Tape.
$28.00Vent / Grill Mask Tape. 8″ x 200′ with 4″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
PAT008 – 10-1/2″ x 10-1/2″ Sheet metal duct patch, 25 pack.
$53.7510-1/2″ x 10-1/2″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 8″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
DPL003 – 1″ diameter duct plugs.
$32.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 500 per package.
-
SCR850 – Sheet Metal Zip Screws.
$10.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 500 per package.
-
HCT002 – Replacement cutting bit for Adjustable Hole Cutter.
$15.00Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
-
PAT007 – 8″ x 8″ Sheet metal duct patch, 25 pack.
$41.588″ x 8″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 6″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
DPL002 – 2-1/2″ diameter duct plugs.
$48.002-1/2″ diameter duct plugs. These soft plastic duct plugs fit inside a 2-1/2″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 16″ or larger. 100 per package.
-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
CLP021 – 10″ Quick Clamp
$26.0010″ Quick Clamp. The 10″ Quick Clamp is the fastest way to secure your washable filter bag to the General and Ranger power vacuum. The 10″ Quick Clamp fits around collar sizes that measure 10″ diameter and comes with a cotter pin for locking.
-
PAT010 – 12″ x 12″ Sheet metal duct patch, 25 pack.
$59.2112″ x 12″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 10″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
DPL005 – 1″ diameter duct plugs.
$135.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 3,000 per package.
-
SDR001 – Lenox 1″ Uni-Bit Step Drill.
$54.00Lenox 1″ Uni-Bit Step Drill. This high quality drill bit cuts through sheet metal in seconds to create holes from 3/8″ – 1″ diameter. Fits in any drill with 3/8″ or larger chuck.
-
TAP001 – Aluminum Foil Duct Tape.
$25.00Aluminum Foil Duct Tape. 2-1/2″ x 60 Yards. U/L 181A-P Listed. Perfect for sealing duct work openings, to the NADCA Standard, ACR2013.
-
TAP006 – 24″ Vent / Grill Mask Tape.
$82.00Vent / Grill Mask Tape. 24″ x 200′ with 12″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
DPL001 – 1″ diameter duct plugs.
$85.001″ diameter duct plugs. These hard plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit flush on flat surfaces and are not compatible with round duct work. 500 per package. *** THIS PRODUCT MAY DELIVER AS A SPECIAL ORDER, EXPECT A LEAD TIME OF 5-7 DAYS *** EXPEDITED SHIPPING WILL NOT BE HONORED FOR THIS ITEM.
-
VAC304 – 5-Gallon Bucket Lid with Pour Spout
$8.005-Gallon Bucket Lid with Pour Spout. Use this lid with MME Bucket, VAC302, to seal contamination in bucket after using the bucket vac, or for mixing down chemical concentrates to 5-Gallon quantities.
-
HSW001 – 1″ Lenox Bi-Metal Hole Saw.
$16.001″ Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 1″ holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8″ or larger chuck.
-
HCT001 – 2″ – 12″ Hole Cutter.
$76.002″ – 12″ Hole Cutter. Cut a perfect circle in up to #20 gauge sheet metal with this tool. Connect your duct cleaning vacuum hose to a round hole with a Snap Adaptor for ideal airflow.
-
PAT006 – 6″ x 6″ Sheet metal duct patch, 100 pack.
$78.006″ x 6″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 100 pieces. Need to order more than one bundle, purchase 500 pieces for discounted prices. Perfect for covering 2″-4″ Hose Connections, Inspection Access, and Compressed Air and Brush Access Points, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (1 PACKAGE). PHONE ORDERS ONLY, 800-728-3828. ***
-
HSW003 – 2-1/2″ Lenox Bi-Metal Hole Saw.
$25.002-1/2″ Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 2-1/2″ holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8″ or larger chuck.
-
SCR851 – Sheet Metal Zip Screws.
$245.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 15,000 per package.
-
HCT020 – Lenox/Hilmor 12-in-1 Fin Comb
$25.00Lenox/Hilmor 12-in-1 Fin Comb. Professional quality hand tools are a must on the job site. Never clean or maintain a cooling coil without repairing damaged fins. Use the 12-in-1 Fin Comb to straighten bent over fins, restoring coil efficiecy.
-
ZBG003 – 36″ diameter zone bag.
$133.0036″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
ZBG002 – 26″ diameter zone bag.
$103.0026″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
GEN007 – Dust Collection Bucket and Clamp
$98.00Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.
-
ZBG001 – 18″ diameter zone bag.
$88.0018″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
ENG142 – 5 Gallon SureCan Gas Can
$55.00ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
ZBG004 – 48″ diameter zone bag.
$183.0048″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
-
HCT016 – Lenox/Hilmor 3-Blade Sheet Metal Crimper
$24.00Lenox/Hilmor 3-Blade Sheet Metal Crimper. Professional quality hand tools are a must on the job site. Never be without a set of crimpers when duct/pipe fitting is part of your job. Use the 3-Blade Crimpers to fit same-size sheet metal snap-lock pipe end to end with ease.
