-
TAP013 – Foil Grip 1403 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1403-181BFX is a UL 181B-FX listed pressure sensitive, 40-year cycle, duct joint and general purpose rolled sealant. Foil-Grip 1403-181BFX provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1403-181BFX is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.
-
DVB106 – Wireless SmartPhone Vane Anemometer
$140.00Wireless/Bluetooth SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB106 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB106 shows airflow in FPM, CFM, CMH, MPS. Use DVB106 to also measure Temperature, Humidity and Air Pressure. Send onsite professional reports from your SmartPhone or Device by email. The DVB106 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to Smart Devices VIA Bluetooth.
-
ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
$10.00ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
-
ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG143 – 2.2 Gallon SureCan Gas Can
$45.00ENG143 – 2.2 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
ENG142 – 5 Gallon SureCan Gas Can
$55.00ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
ZBG006 – 36″ & 48″ Zone Bag Replacement Bladder
$48.0036″ & 48″ Zone Bag Replacement Bladder. Repair your Air Duct Cleaning Inflatable Zone Bag with this heavy-duty replacement bladder. Bladders are designed to work with 36″ & 48″ Zone Bags. Color of replacement bladder may differ from picture.
-
ZBG005 – 18″ & 26″ Zone Bag Replacement Bladder
$41.0018″ & 26″ Zone Bag Replacement Bladder. Repair your Air Duct Cleaning Inflatable Zone Bag with this heavy-duty replacement bladder. Bladders are designed to work with 18″ & 26″ Zone Bags. Color of replacement bladder may differ from picture.
-
ZBG004 – 48″ diameter zone bag.
$183.0048″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
ZBG003 – 36″ diameter zone bag.
$133.0036″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
ZBG002 – 26″ diameter zone bag.
$103.0026″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
ZBG001 – 18″ diameter zone bag.
$88.0018″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
VAC304 – 5-Gallon Bucket Lid with Pour Spout
$8.005-Gallon Bucket Lid with Pour Spout. Use this lid with MME Bucket, VAC302, to seal contamination in bucket after using the bucket vac, or for mixing down chemical concentrates to 5-Gallon quantities.
-
VAC302 – 5-Gallon Bucket, Red.
$11.005-Gallon Bucket, Red. The Meyer Machine Bucket is handy for use as a tool bucket, slop sink, washing registers, and use on the HEPA Filtered Bucket Vac, VAC300. Carry extra 5-Gallon buckets on your truck for the unknown dirty job that requires haul-out.
-
TAP015 – Aluma Grip AFT-701 – Indoor/outdoor rolled mastic sealant – 4″ x 50′ roll
$45.00Aluma-Grip AFT-701 is a heavy-duty, pressure-sensitive, 40-year-cycle, duct joint rolled sealant. AFT-701 provides an aggressive water-resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC-coated duct, and duct wrap vapor barriers. AFT-701 is also suitable for sub-grade application on PVC-coated duct. Eligible for a 5-year stand-alone warranty and a 10-year warranty when used in the Foil-Sealant Sealing System.
-
TAP014 – Foil Grip 1404 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1404-181-BFX is a UL 181B-FX listed pressures sensitive rolled mastic sealant. The Foil-Grip 1404-181-BFX has superior tack for instant grab strength to galvanized metal, flex duct, PVC coated pipe, and PVC coated ductwork for an immediate airtight bond. The foil facer/butyl adhesive composite provides excellent UV resistance coupled with outstanding water resistance. The easy tear provides a fast installation for airtight seals on above and below grade ductwork applications.
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
TAP010 – Travel-Tack – Low VOC installation adhesive, 12 ounce can
$14.00Travel-Tack is a self-contained, instant-tacking portable spray system engineered to deliver a low-pressure web spray that eliminates adhesive vaporization and over-spray. Its portability, limited equipment clean-up and low equipment cost make this adhesive ideal for shop or field use. Travel-Tack passes ASTM C916, SCAQMD Rule #1168, and has the City of Los Angeles Approval RR #8069.
-
TAP006 – 24″ Vent / Grill Mask Tape.
$82.00Vent / Grill Mask Tape. 24″ x 200′ with 12″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
TAP005 – Vent / Grill Mask Tape.
$28.00Vent / Grill Mask Tape. 8″ x 200′ with 4″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
-
TAP001 – Aluminum Foil Duct Tape.
$25.00Aluminum Foil Duct Tape. 2-1/2″ x 60 Yards. U/L 181A-P Listed. Perfect for sealing duct work openings, to the NADCA Standard, ACR2013.
-
SDR001 – Lenox 1″ Uni-Bit Step Drill.
$54.00Lenox 1″ Uni-Bit Step Drill. This high quality drill bit cuts through sheet metal in seconds to create holes from 3/8″ – 1″ diameter. Fits in any drill with 3/8″ or larger chuck.
-
SCR851 – Sheet Metal Zip Screws.
$245.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 15,000 per package.
-
SCR850 – Sheet Metal Zip Screws.
$10.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 500 per package.
-
PAT224-24 – Cammed-PSA Access Door,24″x24″
$83.00Cammed Access Door for Sheet Metal Duct Work. 24″ x 24″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-20 – Cammed-PSA Access Door,20″x20″
$73.00Cammed Access Door for Sheet Metal Duct Work. 20″ x 20″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-18 – Cammed-PSA Access Door,18″x18″
$60.00Cammed Access Door for Sheet Metal Duct Work. 18″ x 18″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
