Tools, Supplies & Accessories – Page 2 – Meyer Machine Supply & Equipment

steroids for sale fast shipping steroids for sale online anabolic steroids for sale

1-800-728-3828

Meyer Machine Supply & Equipment

Add to cart

TAP014 – Foil Grip 1404 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00
Foil-Grip 1404-181-BFX is a UL 181B-FX listed pressures sensitive rolled mastic sealant. The Foil-Grip 1404-181-BFX has superior tack for instant grab strength to galvanized metal, flex duct, PVC coated pipe, and PVC coated ductwork for an immediate airtight bond. The foil facer/butyl adhesive composite provides excellent UV resistance coupled with outstanding water resistance. The easy tear provides a fast installation for airtight seals on above and below grade ductwork applications.

Add to cart
Add to cart

TAP013 – Foil Grip 1403 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
Rated 4.00 out of 5
$58.00
Foil-Grip 1403-181BFX is a UL 181B-FX listed pressure sensitive, 40-year cycle, duct joint and general purpose rolled sealant. Foil-Grip 1403-181BFX provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1403-181BFX is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.

Add to cart
Add to cart

ENG142 – 5 Gallon SureCan Gas Can
$55.00
ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!

Add to cart
Add to cart

SDR001 – Lenox 1″ Uni-Bit Step Drill.
$54.00
Lenox 1″ Uni-Bit Step Drill. This high quality drill bit cuts through sheet metal in seconds to create holes from 3/8″ – 1″ diameter. Fits in any drill with 3/8″ or larger chuck.

Add to cart
Add to cart

PAT008 – 10-1/2″ x 10-1/2″ Sheet metal duct patch, 25 pack.
$53.75
10-1/2″ x 10-1/2″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 8″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***

Add to cart
Add to cart

TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00
Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.

Add to cart
Add to cart

ZBG006 – 36″ & 48″ Zone Bag Replacement Bladder
$48.00
36″ & 48″ Zone Bag Replacement Bladder. Repair your Air Duct Cleaning Inflatable Zone Bag with this heavy-duty replacement bladder. Bladders are designed to work with 36″ & 48″ Zone Bags. Color of replacement bladder may differ from picture.

Add to cart
Add to cart

DPL002 – 2-1/2″ diameter duct plugs.
$48.00
2-1/2″ diameter duct plugs. These soft plastic duct plugs fit inside a 2-1/2″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 16″ or larger. 100 per package.

Add to cart
Add to cart

PAT224-16 – Cammed-PSA Access Door,16″x16″
$47.00
Cammed Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.

Add to cart
Add to cart

PAT222-18 – Cammed-DT Access Door, 18″x18″
$47.00
Cammed Access Door for Sheet Metal Duct Work. 18″ x 18″ Hinged Door is Secured with 4 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.

Add to cart
Add to cart

PAT221-18 – Hinged-DT Access Door, 18″x18″
$47.00
Hinged Access Door for Sheet Metal Duct Work. 18″ x 18″ Hinged Door is Secured with Two Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.

Add to cart
Add to cart

HCT017 – Lenox/Hilmor 3 inch Seamer
$47.00
Lenox/Hilmor 3 inch Seamer. Professional quality hand tools are a must on the job site. Never be without a set of seamers when duct/pipe fitting is part of your job. Use the 3 inch Seamer to make small sheet metal bends and simple fabrications.

Add to cart
Add to cart

ENG143 – 2.2 Gallon SureCan Gas Can
$45.00
ENG143 – 2.2 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!

Add to cart
Add to cart

TAP015 – Aluma Grip AFT-701 – Indoor/outdoor rolled mastic sealant – 4″ x 50′ roll
$45.00
Aluma-Grip AFT-701 is a heavy-duty, pressure-sensitive, 40-year-cycle, duct joint rolled sealant. AFT-701 provides an aggressive water-resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC-coated duct, and duct wrap vapor barriers. AFT-701 is also suitable for sub-grade application on PVC-coated duct. Eligible for a 5-year stand-alone warranty and a 10-year warranty when used in the Foil-Sealant Sealing System.

Add to cart
Add to cart

PAT007 – 8″ x 8″ Sheet metal duct patch, 25 pack.
$41.58
8″ x 8″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 6″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***

Add to cart
Add to cart

ZBG005 – 18″ & 26″ Zone Bag Replacement Bladder
$41.00
18″ & 26″ Zone Bag Replacement Bladder. Repair your Air Duct Cleaning Inflatable Zone Bag with this heavy-duty replacement bladder. Bladders are designed to work with 18″ & 26″ Zone Bags. Color of replacement bladder may differ from picture.

Add to cart
Add to cart

PAT224-14 – Cammed-PSA Access Door,14″x14″
$37.00
Cammed Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.

Add to cart
Add to cart

PAT223-14 – Hinged-PSA Access Door,14″x14″
$37.00
Hinged Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.

Add to cart
Add to cart

PAT222-16 – Cammed-DT Access Door, 16″x16″
$37.00
Cammed Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with 4 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.

Add to cart
Add to cart

PAT221-16 – Hinged-DT Access Door, 16″x16″
$37.00
Hinged Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with Two Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.

Add to cart
Add to cart

HCT018 – Lenox/Hilmor 1 inch V-Notcher
$36.00
Lenox/Hilmor 1 inch V-Notcher. Professional quality hand tools are a must on the job site. Never be without a set of notchers when duct/pipe fitting is part of your job. Use the 1 inch notcher to make small sheet metal notches for simple fabrications.

Add to cart
Add to cart

PAT223-12 – Hinged-PSA Access Door,12″x12″
$32.00
Hinged Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with One Cam-Lock. Pressure Sensitive Adhesive flange for easy installation.

Add to cart
Add to cart

PAT222-14 – Cammed-DT Access Door, 14″x14″
$32.00
Cammed Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with 4 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.

Add to cart
Add to cart

PAT221-14 – Hinged-DT Access Door, 14″x14″
$32.00
Hinged Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with Two Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.

Add to cart
Add to cart

DPL003 – 1″ diameter duct plugs.
$32.00
1″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 500 per package.

Add to cart
Add to cart

HCT022 – Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver
$31.00
Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver. Professional quality hand tools are a must on the job site. This 9-in-1 driver tool puts the most common driver bits in the HVAC industry at your fingertips.

Add to cart
Add to cart

PAT224-12 – Cammed-PSA Access Door,12″x12″
$29.00
Cammed Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.

Add to cart
Add to cart

PAT224-10 – Cammed-PSA Access Door,10″x10″
$29.00
Cammed Access Door for Sheet Metal Duct Work. 10″ x 10″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.

Add to cart
Add to cart

PAT223-10 – Hinged-PSA Access Door,10″x10″
$29.00
Hinged Access Door for Sheet Metal Duct Work. 10″ x 10″ Hinged Door is Secured with One Cam-Lock. Pressure Sensitive Adhesive flange for easy installation.

Add to cart
Add to cart

TAP005 – Vent / Grill Mask Tape.
$28.00
Vent / Grill Mask Tape. 8″ x 200′ with 4″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.

Add to cart