-
CLP021 – 10″ Quick Clamp
$26.0010″ Quick Clamp. The 10″ Quick Clamp is the fastest way to secure your washable filter bag to the General and Ranger power vacuum. The 10″ Quick Clamp fits around collar sizes that measure 10″ diameter and comes with a cotter pin for locking.
-
DPL001 – 1″ diameter duct plugs.
$85.001″ diameter duct plugs. These hard plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit flush on flat surfaces and are not compatible with round duct work. 500 per package. *** THIS PRODUCT MAY DELIVER AS A SPECIAL ORDER, EXPECT A LEAD TIME OF 5-7 DAYS *** EXPEDITED SHIPPING WILL NOT BE HONORED FOR THIS ITEM.
-
DPL002 – 2-1/2″ diameter duct plugs.
$48.002-1/2″ diameter duct plugs. These soft plastic duct plugs fit inside a 2-1/2″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 16″ or larger. 100 per package.
-
DPL003 – 1″ diameter duct plugs.
$32.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 500 per package.
-
DPL005 – 1″ diameter duct plugs.
$135.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 3,000 per package.
-
DVB105 – Plug-In SmartPhone Vane Anemometer
$88.00Plug-In SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB105 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB105 shows airflow in FPM, CFM, CMH, MPS. Send onsite professional reports from you SmartPhone or Device by email. The DVB105 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to SMART devices via 1/8″ mini-plug.
-
DVB106 – Wireless SmartPhone Vane Anemometer
$140.00Wireless/Bluetooth SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB106 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB106 shows airflow in FPM, CFM, CMH, MPS. Use DVB106 to also measure Temperature, Humidity and Air Pressure. Send onsite professional reports from your SmartPhone or Device by email. The DVB106 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to Smart Devices VIA Bluetooth.
-
ENG142 – 5 Gallon SureCan Gas Can
$55.00ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
ENG143 – 2.2 Gallon SureCan Gas Can
$45.00ENG143 – 2.2 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
$10.00ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
-
GEN007 – Dust Collection Bucket and Clamp
$98.00Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.
-
GEN930 – OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums
$348.00OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums. The bolt-on fuel cell kit comes with drill templates for retro-fit on older vacuums, new vacuums are pre-drilled and ready for installation. The kit includes a 6-gallon Flambeau tank, a heavy duty frame, the required hoses, and all the necessary hardware. Installation of this kit removes the necessity of detatchable fuel cells and any quick-disconnect fittings. Add this item to your new vacuum purchase. Carbon cannister (GEN933) not included. For CARB compliancy add P/N: GEN933 to your order.
-
GEN933 – 400cc Carbon Cannister for CARB Compliancy on 6 Gallon Fuel Cell.
$78.00400cc Carbon Cannister for CARB Compliancy on 6 Gallon Fuel Cell. Add this 400cc carbon cannister to your General, Major, or Ranger vacuum and 6 gallon fuel cell for CARB comliancy.
-
HCT001 – 2″ – 12″ Hole Cutter.
$76.002″ – 12″ Hole Cutter. Cut a perfect circle in up to #20 gauge sheet metal with this tool. Connect your duct cleaning vacuum hose to a round hole with a Snap Adaptor for ideal airflow.
-
HCT002 – Replacement cutting bit for Adjustable Hole Cutter.
$15.00Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
-
HCT013 – Lenox/Hilmor Aviation Tin Snips, LEFT
$24.00Lenox/Hilmor Aviation Tin Snips, LEFT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT014 – Lenox/Hilmor Aviation Tin Snips, RIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, RIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT015 – Lenox/Hilmor Aviation Tin Snips, STRAIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, STRAIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT016 – Lenox/Hilmor 3-Blade Sheet Metal Crimper
$24.00Lenox/Hilmor 3-Blade Sheet Metal Crimper. Professional quality hand tools are a must on the job site. Never be without a set of crimpers when duct/pipe fitting is part of your job. Use the 3-Blade Crimpers to fit same-size sheet metal snap-lock pipe end to end with ease.
-
HCT017 – Lenox/Hilmor 3 inch Seamer
$47.00Lenox/Hilmor 3 inch Seamer. Professional quality hand tools are a must on the job site. Never be without a set of seamers when duct/pipe fitting is part of your job. Use the 3 inch Seamer to make small sheet metal bends and simple fabrications.
-
HCT018 – Lenox/Hilmor 1 inch V-Notcher
$36.00Lenox/Hilmor 1 inch V-Notcher. Professional quality hand tools are a must on the job site. Never be without a set of notchers when duct/pipe fitting is part of your job. Use the 1 inch notcher to make small sheet metal notches for simple fabrications.
-
HCT019 – Lenox/Hilmor Duct Knife.
$26.00Lenox/Hilmor Duct Knife. Professional quality hand tools are a must on the job site. Never be without a dual sided, specially purposed Duct Knife when the job requires. Make clean cuts through duct insulation or duct board.
-
HCT020 – Lenox/Hilmor 12-in-1 Fin Comb
$25.00Lenox/Hilmor 12-in-1 Fin Comb. Professional quality hand tools are a must on the job site. Never clean or maintain a cooling coil without repairing damaged fins. Use the 12-in-1 Fin Comb to straighten bent over fins, restoring coil efficiecy.
-
HCT021 – Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver
$26.00Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver. Professional quality hand tools are a must on the job site. Never be without a professional nut driving tool to remove and install the most common sized screw heads in the HVAC industry.
-
HCT022 – Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver
$31.00Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver. Professional quality hand tools are a must on the job site. This 9-in-1 driver tool puts the most common driver bits in the HVAC industry at your fingertips.
-
HCT024 – Lenox/Hilmor 6-in-1 Stubby Multi-Driver
$13.00Lenox/Hilmor 6-in-1 Stubby Multi-Driver. Professional quality hand tools are a must on the job site. This 6-in-1 driver tools puts some of the most common driver bits at your finger tips in a STUBBY Style driver.
-
HSW001 – 1″ Lenox Bi-Metal Hole Saw.
$16.001″ Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 1″ holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8″ or larger chuck.
-
HSW003 – 2-1/2″ Lenox Bi-Metal Hole Saw.
$25.002-1/2″ Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 2-1/2″ holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8″ or larger chuck.
