-
DSR243 – Pan-Grip 1 gallon kit
$293.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR244 – Pan-Grip Flex 2 gallon kit
$824.00Pan-Grip Flex is a multicomponent novolac based elastomeric epoxy product that is ideal for residential, commercial and industrial applications requiring high elongation in typical environments. It is able to withstand moisture, manage temperature changes, and adjust from freeze to thaw. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The elastomeric properties of Pan-Grip Flex make the product ideal for surfaces where slight movement is expected (i.e. AHU floor, etc.). The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer.
-
FOG001 – Ultra-Low Volume Variable Flow Atomizing Fogger.
$375.00Ultra-Low Volume Variable Flow Atomizing Fogger. The BGE Fogger has a 1-Gallon fluid tank to hold any chemical to fog, and a 48″ flexible hose. Fluid nozzle allows operator to control ratio of fluid to air while spraying. Use the FOG001 to spray in duct and HVAC chemicals such as BBJ Maintain C-1, Envirocon, Oxine AD, Micro-Coil Clean, Power-Coil Clean and many others.
-
FOG010 – Coil-Jet Sprayer with Wand
$737.00Coil-Jet Sprayer with Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.
-
FOG016 – Coil-Shot Sprayer Gun
$103.00The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.
-
FOG017 – Coil-Shot Wand Assembly
$54.003 ft. wand is specially designed to quickly connect to CoilShot cleaning tool and clean coils from inside to outside. The wand features a slim profile that fits between the grate so you don’t have to remove the top fan and housing.
-
FOG020 – The Squall
$232.00The Squall Cold Mist Fogger Attachment. The Squall is a remote venturi air/liquid mixing nozzle, specifically designed for use in air ducts and on HVAC equipment. The design allows for a cleaning technician to attach it to standard compressed air duct cleaning extension lines like the Hurricane. Using compressed air its power source, the treatment liquid is drawn through the liquid line to the mixing nozzle where it is then sprayed out in a micro-drop mist. By leveraging the use of existing compressed air extension lines, the Squall cold mist fog can be applied from within the duct, providing consistent product application as the nozzle is retracted back toward the technician. Additionally, The Squall can be used for directed or general broadcast cold mist fog outside of an air duct. Download Fogging Catalog Page.
-
TAP010 – Travel-Tack – Low VOC installation adhesive, 12 ounce can
$14.00Travel-Tack is a self-contained, instant-tacking portable spray system engineered to deliver a low-pressure web spray that eliminates adhesive vaporization and over-spray. Its portability, limited equipment clean-up and low equipment cost make this adhesive ideal for shop or field use. Travel-Tack passes ASTM C916, SCAQMD Rule #1168, and has the City of Los Angeles Approval RR #8069.
-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
TAP013 – Foil Grip 1403 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1403-181BFX is a UL 181B-FX listed pressure sensitive, 40-year cycle, duct joint and general purpose rolled sealant. Foil-Grip 1403-181BFX provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1403-181BFX is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.
-
TAP014 – Foil Grip 1404 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1404-181-BFX is a UL 181B-FX listed pressures sensitive rolled mastic sealant. The Foil-Grip 1404-181-BFX has superior tack for instant grab strength to galvanized metal, flex duct, PVC coated pipe, and PVC coated ductwork for an immediate airtight bond. The foil facer/butyl adhesive composite provides excellent UV resistance coupled with outstanding water resistance. The easy tear provides a fast installation for airtight seals on above and below grade ductwork applications.
-
TAP015 – Aluma Grip AFT-701 – Indoor/outdoor rolled mastic sealant – 4″ x 50′ roll
$45.00Aluma-Grip AFT-701 is a heavy-duty, pressure-sensitive, 40-year-cycle, duct joint rolled sealant. AFT-701 provides an aggressive water-resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC-coated duct, and duct wrap vapor barriers. AFT-701 is also suitable for sub-grade application on PVC-coated duct. Eligible for a 5-year stand-alone warranty and a 10-year warranty when used in the Foil-Sealant Sealing System.
