-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
DSR106 – BBJ FreshDuct Deodorizer Concentrate.
$52.00BBJ FreshDuct Deodorizer Concentrate. FreshDuct contains BBJ EnviroGard™, an encapsulation control agent that controls odors by both encapsulating and breaking down odor molecules, while time releasing a fresh fragrance. BBJ FreshDuct Odor Eliminator leaves the air fresh and clean. Our duct cleaning products are formulated with non-toxic and readily biodegradable ingredients meaning there is no need to evacuate the premises during application. This container can mix up to 5 gallons of RTU deodorizer. Download MSDS
-
DSR105 – BBJ FreshDuct 14 oz.
$17.50BBJ FreshDuct 14 oz. Aerosol Deodorizer. FreshDuct contains BBJ EnviroGard™, an encapsulation control agent that controls odors by both encapsulating and breaking down odor molecules, while time releasing a fresh fragrance. BBJ FreshDuct Odor Eliminator leaves the air fresh and clean. Our duct cleaning products are formulated with non-toxic and readily biodegradable ingredients meaning there is no need to evacuate the premises during application. Download MSDS
-
DSR243 – Pan-Grip 1 gallon kit
$293.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR132 – BBJ Mold Control
$163.00BBJ Mold Control for HVAC Systems and Air Ducts, control and inhibit the growth of microorganisms – such as gram positive and gram negative bacteria, algae, and mold – in HVAC Systems and Air Ducts. Concentrate mixes down to 7.5 gallons of product. Download MSDS
-
DSR131 – BBJ Mold Control Aerosol
BBJ Mold Control for HVAC Systems and Air Ducts, control and inhibit the growth of microorganisms – such as gram positive and gram negative bacteria, algae, and mold – in HVAC Systems and Air Ducts. This product is RTU (Ready-To-Use) in a 14 fl. oz. aerosol can; use this product in lieu of BBJ Maintain C-1 Concentrate. Download MSDS
-
DSR213 – Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. 1 Gallon
$40.00Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. Iron-Grip 601 is a versatile, all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Iron-Grip stays flexible to save call-back labor. Iron-Grip’s excellent coverage rates and easy brush-on application provide low installed cost. Iron-Grip 601 is UL 181 B-M Listed Passes ASTM C-731, ASTM D-2202. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. City of Los Angeles Approval RR #8069 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
DSR216 – Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon.
$20.00Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon. Duct-Seal 321 in an all purpose industrial grade duct sealant for all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. It includes UV inhibitors for extended outdoor exposure and built-in fiber reinforcement for added strength. This non-toxic water based product is solvent free and is suitable for residential use. -Duct-Seal 321 is UL 181 B-M Listed -Passes ASTM D-2202, ASTM C-731. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. -City of Los Angeles Approval RR #8069
-
DSR124 – Coil-Shot Tablets
$38.00The revolutionary CoilShot cleaning system is designed to offer fast and easy cleaning of residential and light commercial single-pass HVAC coils without the strain and bulkiness of using liquid coil cleaners.
-
DSR001 – Oxine AD -12 Pack
$250.00Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 12 vials to a case, each vial mixes into 1 Gallon of usable solution.Download MSDS
-
DSR241 – Pan-Grip Burst Bag
$46.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR111 – Mini Split First Aid Kit
$24.00The Mini Split First Aid Kit includes aerosol versions of our popular Micro Coil Clean and BBJ Mold Control for HVAC Systems and Air Duct products. This duo provides the muscle you need for a mini split cleaning job.
-
DSR133 – BBJ MMRii
$14.00BBJ MMR-ii – Quart. MEETS EPA EMERGING PATHOGEN GUIDELINES. Powerful disinfectant and mold remover. MMR-II is a commercial-grade non-porous surface cleaner and broad-spectrum disinfectant combined in one powerful product. Clean and sanitize in one step. Disinfects, and removes unsightly mold streaks on walls, ceilings, diffusers, and other hard surfaces, and kills mold in HVAC systems. MMR-II is an EPA registered commercial cleaner and disinfectant. MMRii is highly effective against a wide variety of pathogenic oranisms, it is ready to use, requires no mixing, and kills 99% of germs.
-
DSR242 – Pan-Grip Cartridge
$48.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
FOG001 – Ultra-Low Volume Variable Flow Atomizing Fogger.
$375.00Ultra-Low Volume Variable Flow Atomizing Fogger. The BGE Fogger has a 1-Gallon fluid tank to hold any chemical to fog, and a 48″ flexible hose. Fluid nozzle allows operator to control ratio of fluid to air while spraying. Use the FOG001 to spray in duct and HVAC chemicals such as BBJ Maintain C-1, Envirocon, Oxine AD, Micro-Coil Clean, Power-Coil Clean and many others.
-
DSR221 – RE-500 Interior Coating/Insulation Encapsulant – White
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR006 – Envirocon 5-Gallon Jug. * SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored.* SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
DSR010 – Decon7 HVAC Disinfectant
$54.00DECON 7 HVAC DISINFECTANT
– 3 PART D7 EVAPORATOR COIL AND HVAC DISINFECTING KIT
– 1 QUART -
DSR222 – RE-500 Interior Coating/Insulation Encapsulant – Black
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR005 – Envirocon 5-Gallon Jug.* SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored. * SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
FOG020 – The Squall
$232.00The Squall Cold Mist Fogger Attachment. The Squall is a remote venturi air/liquid mixing nozzle, specifically designed for use in air ducts and on HVAC equipment. The design allows for a cleaning technician to attach it to standard compressed air duct cleaning extension lines like the Hurricane. Using compressed air its power source, the treatment liquid is drawn through the liquid line to the mixing nozzle where it is then sprayed out in a micro-drop mist. By leveraging the use of existing compressed air extension lines, the Squall cold mist fog can be applied from within the duct, providing consistent product application as the nozzle is retracted back toward the technician. Additionally, The Squall can be used for directed or general broadcast cold mist fog outside of an air duct. Download Fogging Catalog Page.
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
FOG016 – Coil-Shot Sprayer Gun
$103.00The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.
-
DSR121 – BBJ Power Coil Clean.
$21.00BBJ Power Coil Clean. Power Coil Clean, with its special pH balanced patented formula, removes the most stubborn soils and deposits from cooling coils. It effectively cleans and deodorizes evaporator coils, heating coils, condenser coils, window units, air filters, blowers, and other dirty HVAC components. With its special fast, penetrating action Power Coil Clean gets to hard to reach places by cutting through the toughest dirt, grease, and grime. Power Coil Clean includes patented Enviro-Gard that protects coils while cleaning. Keeping HVAC coils clean is part of any standard HVAC maintenance program and BBJ POWER COIL CLEAN™ with Enviro-Gard is a fast and safe evaporator pH Neutral coil cleaner that cleans and protects coils during cleaning. It quickly cleans cooling coils that trap dust, soil, grime and other troublesome deposits that reduce the heat transfer efficiency of HVAC units. Download MSDS
-
TAP013 – Foil Grip 1403 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1403-181BFX is a UL 181B-FX listed pressure sensitive, 40-year cycle, duct joint and general purpose rolled sealant. Foil-Grip 1403-181BFX provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1403-181BFX is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.
-
FOG017 – Coil-Shot Wand Assembly
$54.003 ft. wand is specially designed to quickly connect to CoilShot cleaning tool and clean coils from inside to outside. The wand features a slim profile that fits between the grate so you don’t have to remove the top fan and housing.
-
DSR231 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – White
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
FOG010 – Coil-Jet Sprayer with Wand
$737.00Coil-Jet Sprayer with Wand. No more dragging hoses or tearing out coils for cleaning. The CoilJet brings water, power and 100 psi of pressure with it, in a compact and portable design for on-the-go HVAC coil cleaning. Specifically designed for condenser coil cleaning and evaporator coil cleaning, the CoilJet replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins – even microchannel coils. The CoilJet holds 3 gallons of water and 1/2 gallon of cleaning solution. An adjustment knob allows the user to mix from straight water to a 4:1 water to solution mixture.
-
DSR215 – Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon
$27.00Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon. Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible to save call-back labor. Flex-Grip 550’s excellent coverage rates and easy brush-on application provide low installed cost. • UL 181 B-M Listed • Passes ASTM C-731, ASTM D-2202 • USDA, EPA and FDA Approved • LEED compliant • SCAQMD Rule 1168 • City of Los Angeles Approval RR #8069
-
DSR112 – Mini Split Bib Kit
$123.00The Mini-Split Bib Kit is the fastest way to clean ductless mini-split coils, blower wheels and more. If you are a contractor, you simply have to have one, or two, in your truck. This kit allows you to safely and quickly clean virtually any mini-split system the correct way using pressurized water on coils, blower wheels and more. The patented technology keeps water away from walls and other surroundings and directs it into the 5 gallon bucket for disposal, so it’s clean and safe all around.
