Duct & Surface Restoration Products

DECON 7  HVAC DISINFECTANT
– 3 PART D7 EVAPORATOR COIL AND HVAC DISINFECTING KIT
– 1 QUART

BBJ MMR-ii – Quart. MEETS EPA EMERGING PATHOGEN GUIDELINES. Powerful disinfectant and mold remover. MMR-II is a commercial-grade non-porous surface cleaner and broad-spectrum disinfectant combined in one powerful product. Clean and sanitize in one step. Disinfects, and removes unsightly mold streaks on walls, ceilings, diffusers, and other hard surfaces, and kills mold in HVAC systems. MMR-II is an EPA registered commercial cleaner and disinfectant. MMRii is highly effective against a wide variety of pathogenic oranisms, it is ready to use, requires no mixing, and kills 99% of germs.

3 ft. wand is specially designed to quickly connect to CoilShot cleaning tool and clean coils from inside to outside. The wand features a slim profile that fits between the grate so you don’t have to remove the top fan and housing.

The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.

Pan-Grip Flex is a multicomponent novolac based elastomeric epoxy product that is ideal for residential, commercial and industrial applications requiring high elongation in typical environments. It is able to withstand moisture, manage temperature changes, and adjust from freeze to thaw. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The elastomeric properties of Pan-Grip Flex make the product ideal for surfaces where slight movement is expected (i.e. AHU floor, etc.). The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer.

Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.

Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon. Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible to save call-back labor. Flex-Grip 550’s excellent coverage rates and easy brush-on application provide low installed cost. • UL 181 B-M Listed • Passes ASTM C-731, ASTM D-2202 • USDA, EPA and FDA Approved • LEED compliant • SCAQMD Rule 1168 • City of Los Angeles Approval RR #8069

Hardcast Spray Seal, 5 Gal. Spray-Seal is an all-purpose high performance sprayable sealant for use on all types of metal duct, ?berglass duct board, duct fabric and ?ex duct. Distinguished by its ability to accommodate minor vibration and movement, Spray-Seal stays ?exible and will not crack. Spray-Seal decreases labor substantially and increases productivity while using less material. 10 Year Outdoor Warranty when combined with an AFT-701 combination system.

The revolutionary CoilShot cleaning system is designed to offer fast and easy cleaning of residential and light commercial single-pass HVAC coils without the strain and bulkiness of using liquid coil cleaners.