-
DSR131 – BBJ Mold Control Aerosol
BBJ Mold Control for HVAC Systems and Air Ducts, control and inhibit the growth of microorganisms – such as gram positive and gram negative bacteria, algae, and mold – in HVAC Systems and Air Ducts. This product is RTU (Ready-To-Use) in a 14 fl. oz. aerosol can; use this product in lieu of BBJ Maintain C-1 Concentrate. Download MSDS
-
TAP010 – Travel-Tack – Low VOC installation adhesive, 12 ounce can
$14.00Travel-Tack is a self-contained, instant-tacking portable spray system engineered to deliver a low-pressure web spray that eliminates adhesive vaporization and over-spray. Its portability, limited equipment clean-up and low equipment cost make this adhesive ideal for shop or field use. Travel-Tack passes ASTM C916, SCAQMD Rule #1168, and has the City of Los Angeles Approval RR #8069.
-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
DSR133 – BBJ MMRii
$14.00BBJ MMR-ii – Quart. MEETS EPA EMERGING PATHOGEN GUIDELINES. Powerful disinfectant and mold remover. MMR-II is a commercial-grade non-porous surface cleaner and broad-spectrum disinfectant combined in one powerful product. Clean and sanitize in one step. Disinfects, and removes unsightly mold streaks on walls, ceilings, diffusers, and other hard surfaces, and kills mold in HVAC systems. MMR-II is an EPA registered commercial cleaner and disinfectant. MMRii is highly effective against a wide variety of pathogenic oranisms, it is ready to use, requires no mixing, and kills 99% of germs.
-
DSR105 – BBJ FreshDuct 14 oz.
$17.50BBJ FreshDuct 14 oz. Aerosol Deodorizer. FreshDuct contains BBJ EnviroGard™, an encapsulation control agent that controls odors by both encapsulating and breaking down odor molecules, while time releasing a fresh fragrance. BBJ FreshDuct Odor Eliminator leaves the air fresh and clean. Our duct cleaning products are formulated with non-toxic and readily biodegradable ingredients meaning there is no need to evacuate the premises during application. Download MSDS
-
DSR216 – Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon.
$20.00Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon. Duct-Seal 321 in an all purpose industrial grade duct sealant for all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. It includes UV inhibitors for extended outdoor exposure and built-in fiber reinforcement for added strength. This non-toxic water based product is solvent free and is suitable for residential use. -Duct-Seal 321 is UL 181 B-M Listed -Passes ASTM D-2202, ASTM C-731. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. -City of Los Angeles Approval RR #8069
-
DSR121 – BBJ Power Coil Clean.
$21.00BBJ Power Coil Clean. Power Coil Clean, with its special pH balanced patented formula, removes the most stubborn soils and deposits from cooling coils. It effectively cleans and deodorizes evaporator coils, heating coils, condenser coils, window units, air filters, blowers, and other dirty HVAC components. With its special fast, penetrating action Power Coil Clean gets to hard to reach places by cutting through the toughest dirt, grease, and grime. Power Coil Clean includes patented Enviro-Gard that protects coils while cleaning. Keeping HVAC coils clean is part of any standard HVAC maintenance program and BBJ POWER COIL CLEAN™ with Enviro-Gard is a fast and safe evaporator pH Neutral coil cleaner that cleans and protects coils during cleaning. It quickly cleans cooling coils that trap dust, soil, grime and other troublesome deposits that reduce the heat transfer efficiency of HVAC units. Download MSDS
-
DSR111 – Mini Split First Aid Kit
$24.00The Mini Split First Aid Kit includes aerosol versions of our popular Micro Coil Clean and BBJ Mold Control for HVAC Systems and Air Duct products. This duo provides the muscle you need for a mini split cleaning job.
-
DSR215 – Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon
$27.00Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon. Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible to save call-back labor. Flex-Grip 550’s excellent coverage rates and easy brush-on application provide low installed cost. • UL 181 B-M Listed • Passes ASTM C-731, ASTM D-2202 • USDA, EPA and FDA Approved • LEED compliant • SCAQMD Rule 1168 • City of Los Angeles Approval RR #8069
-
DSR214 – Hardcast Versa-Grip 181 Indoor/Outdoor Fiber Reinforced White. 1 Gallon.
$28.00Hardcast Versa-Grip 181 Indoor/Outdoor Fiber Free White. 1 Gallon. Versa-Grip 181 is a premium grade, versatile all purpose, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Versa-Grip incorporates a built-in fiber reinforcement for exceptional strength, with UV inhibitors for outdoor use. 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
DSR124 – Coil-Shot Tablets
$38.00The revolutionary CoilShot cleaning system is designed to offer fast and easy cleaning of residential and light commercial single-pass HVAC coils without the strain and bulkiness of using liquid coil cleaners.
-
DSR113 – Mini Split Replacement Bib Bag
$39.00The Mini-Split Bib Kit replacement bib is made from high grade 4 mil plastic that has been sonically welded to provide strong seams and high-performance time after time.
-
DSR122 – BBJ Micro-Coil Clean, 1/2 Gallon Concentrate
$39.00BBJ Micro Coil Clean is a biodegradable coil cleaning solution that is mild for the user and harmless to expensive HVAC/R equipment and the environment. It will remove built-up dirt and grime from coils resulting in improved system efficiency, reduced power consumption, and increased system life. It effectively cleans and deodorizes evaporator coils, heating coils, condenser coils, window units, air filters, blowers, and other dirty HVAC/R components. Concentrate mixes down to 10 gallons of product. Download MSDS
-
DSR213 – Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. 1 Gallon
$40.00Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. Iron-Grip 601 is a versatile, all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Iron-Grip stays flexible to save call-back labor. Iron-Grip’s excellent coverage rates and easy brush-on application provide low installed cost. Iron-Grip 601 is UL 181 B-M Listed Passes ASTM C-731, ASTM D-2202. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. City of Los Angeles Approval RR #8069 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
TAP015 – Aluma Grip AFT-701 – Indoor/outdoor rolled mastic sealant – 4″ x 50′ roll
$45.00Aluma-Grip AFT-701 is a heavy-duty, pressure-sensitive, 40-year-cycle, duct joint rolled sealant. AFT-701 provides an aggressive water-resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC-coated duct, and duct wrap vapor barriers. AFT-701 is also suitable for sub-grade application on PVC-coated duct. Eligible for a 5-year stand-alone warranty and a 10-year warranty when used in the Foil-Sealant Sealing System.
-
DSR241 – Pan-Grip Burst Bag
$46.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR242 – Pan-Grip Cartridge
$48.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
DSR106 – BBJ FreshDuct Deodorizer Concentrate.
$52.00BBJ FreshDuct Deodorizer Concentrate. FreshDuct contains BBJ EnviroGard™, an encapsulation control agent that controls odors by both encapsulating and breaking down odor molecules, while time releasing a fresh fragrance. BBJ FreshDuct Odor Eliminator leaves the air fresh and clean. Our duct cleaning products are formulated with non-toxic and readily biodegradable ingredients meaning there is no need to evacuate the premises during application. This container can mix up to 5 gallons of RTU deodorizer. Download MSDS
-
FOG017 – Coil-Shot Wand Assembly
$54.003 ft. wand is specially designed to quickly connect to CoilShot cleaning tool and clean coils from inside to outside. The wand features a slim profile that fits between the grate so you don’t have to remove the top fan and housing.
-
DSR010 – Decon7 HVAC Disinfectant
$54.00DECON 7 HVAC DISINFECTANT
– 3 PART D7 EVAPORATOR COIL AND HVAC DISINFECTING KIT
– 1 QUART -
TAP013 – Foil Grip 1403 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1403-181BFX is a UL 181B-FX listed pressure sensitive, 40-year cycle, duct joint and general purpose rolled sealant. Foil-Grip 1403-181BFX provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1403-181BFX is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.
-
TAP014 – Foil Grip 1404 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1404-181-BFX is a UL 181B-FX listed pressures sensitive rolled mastic sealant. The Foil-Grip 1404-181-BFX has superior tack for instant grab strength to galvanized metal, flex duct, PVC coated pipe, and PVC coated ductwork for an immediate airtight bond. The foil facer/butyl adhesive composite provides excellent UV resistance coupled with outstanding water resistance. The easy tear provides a fast installation for airtight seals on above and below grade ductwork applications.
-
FOG016 – Coil-Shot Sprayer Gun
$103.00The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.
-
DSR112 – Mini Split Bib Kit
$123.00The Mini-Split Bib Kit is the fastest way to clean ductless mini-split coils, blower wheels and more. If you are a contractor, you simply have to have one, or two, in your truck. This kit allows you to safely and quickly clean virtually any mini-split system the correct way using pressurized water on coils, blower wheels and more. The patented technology keeps water away from walls and other surroundings and directs it into the 5 gallon bucket for disposal, so it’s clean and safe all around.
-
DSR003 – Envirocon Spray Bottles.
$135.00Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS
-
DSR004 – Envirocon Spray Bottles.
$135.00Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS
-
DSR005 – Envirocon 5-Gallon Jug.* SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored. * SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
DSR006 – Envirocon 5-Gallon Jug. * SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored.* SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
DSR132 – BBJ Mold Control
$163.00BBJ Mold Control for HVAC Systems and Air Ducts, control and inhibit the growth of microorganisms – such as gram positive and gram negative bacteria, algae, and mold – in HVAC Systems and Air Ducts. Concentrate mixes down to 7.5 gallons of product. Download MSDS
