steroids for sale fast shippingsteroids for sale onlineanabolic steroids for sale
1-800-728-3828
Meyer Machine Supply & Equipment

The Dad Collection

Father’s Day Featured Items

    • CMP002 – 8.5 HP Honda Powered Portable Air Compressor

      8.5 HP Honda Powered Portable Air Compressor. This air compressor produces 16 CFM @ 175 PSI. The 10 gallon tank provides air storage suitable for a single technician and Hurricane tools.  This portable air compressor features a wheel barrow setup with a large no-flat wheel, and a 4-point landing pad that removes the load from the wheel when at rest.  Air manifold features (2) 1/4″ quick connect couplers and a pressure regulator that can be adjusted from 0 PSI to full tank pressure.  This compressor will load and unload at 145-175 PSI and is most suitable for dryer vent cleaning and light duty HVAC air duct cleaning operations.  This engine is equipped with an electric start package, however a 12-volt battery is not supplied to power the starter motor.  All piston compressors are rated for 50% duty-cycle.  This air compressor is Proudly Manufactured in the USA.

    • PAT223-16 – Hinged-PSA Access Door,16″x16″

      $17.00

      Hinged Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.

    • PPE002 – Water Proof Booties

      $21.00

      Water Proof!!! Booties for Boots up to Size 13. These Booties provide the shoe covering you’ll need to feel comfortable walking through your customer’s home. On wet or rainy days, protect your customer’s home with Water Proof Booties!!! Booties come in a box of 50 pairs.

    • TAP001 – Aluminum Foil Duct Tape.

      $25.00

      Aluminum Foil Duct Tape. 2-1/2″ x 60 Yards. U/L 181A-P Listed. Perfect for sealing duct work openings, to the NADCA Standard, ACR2013.

    • HCT019 – Lenox/Hilmor Duct Knife.

      $26.00

      Lenox/Hilmor Duct Knife. Professional quality hand tools are a must on the job site. Never be without a dual sided, specially purposed Duct Knife when the job requires. Make clean cuts through duct insulation or duct board.

    • TAP005 – Vent / Grill Mask Tape.

      $28.00

      Vent / Grill Mask Tape. 8″ x 200′ with 4″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.

    • PAT224-12 – Cammed-PSA Access Door,12″x12″

      $29.00

      Cammed Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.

    • ENG143 – 2.2 Gallon SureCan Gas Can

      $45.00

      ENG143 – 2.2 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines.  The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow.  By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position!   Not only is SureCan easy to use it is the most durable gas can on the market!

    • DSR241 – Pan-Grip Burst Bag

      $46.00

      Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.

    • PPE025 – Honeywell VAPOR/GAS/P100 Combo-Cartridge

      $47.00

      HONEYWELL NORTH RESPIRATOR FILTER/CARTRIDGE COMBO. THREADS ONTO NORTH HALF/FULL FACE RESPIRATORS. ORGANIC VAPOR / ACID GAS / P100 FILTER.(SOLD AS A 2-PACK)

    • ENG142 – 5 Gallon SureCan Gas Can

      $55.00

      ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines.  The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow.  By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position!   Not only is SureCan easy to use it is the most durable gas can on the market!

    • PAT223-24 – Hinged-PSA Access Door,24″x24″

      $83.00

      Hinged Access Door for Sheet Metal Duct Work. 24″ x 24″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.

    • STC304 – 4″ Dryer Vent Cleaning Vacuum Hose Adaptor

      $87.00

      4″ Dryer Vent Cleaning Vacuum Hose Adaptor. Cleaning residential dryer vents without a collection device can be messy. Use the STC304 to connect a 2″ (1.90″ ID) vacuum hose for collecting lint as you free it from the dirty duct. The STC304 slides into a standard 4″ residential dryer duct and snugly fits because of its tapered design. The 1″ access hole allows tools to be run through the duct for thorough cleaning with compressed air tools or brushes. The vacuum hose connection on the STC304 is a perfect fit for the VAC300 HEPA Filtered Bucket Vac.

    • ZBG002 – 26″ diameter zone bag.

      $103.00

      26″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.

    • STC208 – 8″ Floor Vent Hose Adaptor

      $181.00

      8″ Floor Vent Hose Adaptor. Use the 8″ Floor Vent Hose Adaptor in unconventional air duct cleaning system hook-ups. Down-Flow furnaces that run duct work through slab are hard to get to, but the 8″ Floor Vent Hose Adaptor solves the problem. 1″ access holes make for easy insertion of cleaning tools.

    • DSR222 – RE-500 Interior Coating/Insulation Encapsulant – Black

      $195.00

      RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.

    • PPE022 – Honeywell North Full-Face Respirator – Medium/Large

      $201.00

      HONEYWELL NORTH FULL FACE RESPIRATOR – M/L. SCRATCH RESIST 200 DEG POLY-CARB LENS. THREADED FILTER & CARTRIDGE ATTACHMENT. FILTERS/CARTRIDGES SOLD SEPARATE

    • GBC001 – General Filter Bag.

      $208.00

      General Filter Bag. 4′ diameter x 7′ tall washable cloth bag. Sits atop dust collection bucket (not included), and is stabilized by guide rods (not included).

    • GBC006 – Duct Truck Dust Filter Bag, 6-Pack

      $217.00

      Duct Truck Dust Filter Bag. Replacement filters measure 20″ in diameter and 60″ in length. Filters will fit on collars up to 20″. Filters are sold in 6-Packs.

    • GBC002 – Ranger Filter Bag.

      $251.00

      Ranger Filter Bag. 4′ diameter x 10′ tall washable cloth filter bag. Sits atop dust collection bucket (not included), and stabilizes with guide rods (not included). AKA: Oversize General Bag

    • RDC102 – 8″ x 8″ x 10″ Y-Hose Splitter.

      $254.00

      8″ x 8″ x 10″ Y-Hose Splitter. Adapt your vacuum hose run from ONE 10″ diameter hose to TWO 8″ diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10″ diameter hose to TWO 8″ diameter hoses. Other sizes are available on Special Order.

    • HDG008 – 8″ x 25′ Gator Vacuum Hose.

      $275.00

      8″ x 25′ Gator Vacuum Hose. 8″ Gator Vacuum Hose is clear and green with polyolefin and polypropylene construction. 8″ Gator hose has an external all plastic helix and a smooth bore. 8″ Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.

    • DSR243 – Pan-Grip 1 gallon kit

      $293.00

      Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.

    • DSR232 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – Black

      $315.00

      Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.

    • GEN930 – OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums

      $348.00

      OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums. The bolt-on fuel cell kit comes with drill templates for retro-fit on older vacuums, new vacuums are pre-drilled and ready for installation. The kit includes a 6-gallon Flambeau tank, a heavy duty frame, the required hoses, and all the necessary hardware. Installation of this kit removes the necessity of detatchable fuel cells and any quick-disconnect fittings. Add this item to your new vacuum purchase. Carbon cannister (GEN933) not included. For CARB compliancy add P/N: GEN933 to your order.

    • INS060 – Handheld Video Endoscope with Snapshot and Video Function. (w/ Screen)

      $395.00

      Handheld Video Endoscope with Snapshot and Video Function with 4-1/2″ HD Screen. Use the Handheld Video Endoscope to make fast and critical video inspections in all duct work, through registers, and into components. The Handheld Video Endoscope features a color camera, 3 Meter (10-Foot) optic cable, adjustable LED lighting on the camera head, and a bright LED flashlight built into the handle. This item comes complete with 4.5″ color LCD display and can record still photographs and video with sound onto the 32GB MICRO-SD (TF-CARD) that is PRE-INSTALLED. This unit is powered by a USB-Rechargeable Lithium Battery.  Optic cable comes with detachable accessories:  magnet, 90-degree mirror, hook.

    • CAS300 – Deluxe Hurricane Package

      $565.00

      Deluxe Hurricane Package. The Deluxe Hurricane Package includes the compressed air whips and blow nozzles needed to outfit an Air Duct Cleaner with the tools necessary to tackle most Residential and Light Commercial Air Duct and Dryer Vent Cleaning Jobs. This kit comes complete with two lead lines, 9 compressed air whips/nozzles, high power blow gun, and replacement whip material, Hurricane Riser Ball, and Hurricane Register Wand.

    • AGR601 – Residential Button-Lock Rotary Brushing Kit

      $617.00

      Residential Button-Lock Rotary Brushing Kit. The Residential Button-Lock Rotary Brushing Kit provides the brushes you’ll need to tackle just about every job. The kit includes 20′ and 30′ drill driven brushing shafts and 8 brushes. Brushes selection outfits you to clean flex duct, round pipe, rectangular duct, dryer vents and more. This rotary brushing cable and system is designed to be used with a clutch enabled drill.

    • GEN900 – HUM-V Assist Drive Kit

      From $1,750.00
      [pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/HUM-V.pdf"]

      HUM-V Assist Drive ADD-ON Package for General, Ranger, or Major.  The HUM-V Assist Drive provides additional power to help technicians navigate the vacuum over turf or sloped terrain.  The HUM-V is designed with a 1/2-HP electric motor that is powered by the 12V battery on the vacuum.  The HUM-V moves FOWARD & REVERSE at a steady 3 MPH pace, with a single wheel drive.  The HUM-V is a normally neutral system that allows the vacuum to free wheel without any drive engagement.  Available as WEBSITE SALES on NEW Equipment ONLY.  Purchasing HUM-V requires the addition of a Power Vacuum to your order.  HUM-V Vacuum Packages are built to order; please allow extra for delivery.  If you would like to Add HUM-V as a RETRO-FIT to your existing vacuum, call for details 800-728-3828.

    • INS100 – Video Inspection Push Cable System.

      $2,148.00

      [pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/04/INS100.pdf"] [pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/INS100.pdf"]

      Video Inspection Push Cable System. The High Quality Video Inspection Push Cable Inspection System can be deployed on any job-site for inspection up to 100′ into the system. The water-resistant camera head makes this system ideal for dry overhead ductwork, as well as subterranean ducts that may have taken on water or waste. The system records on SD Card for quick and easy transfer of files. The camera head can be corrected by indexing 90 degrees. Variable intensity LED lighting allows the operator to view the camera subject with clarity in all duct work. 7″ HD Color Display allows for still photos and video to be directly recorded onto SD-Card. Display also allows for connetion of external display or remote viewing headset. The system can be operated on battery power or while plugged into standard 110V electrical.

    Start typing and press Enter to search

    Shopping Cart

    Subtotal: $20,554.95

    View cartCheckout