Father’s Day Featured Items
-
AGR601 – Residential Button-Lock Rotary Brushing Kit
$617.00Residential Button-Lock Rotary Brushing Kit. The Residential Button-Lock Rotary Brushing Kit provides the brushes you’ll need to tackle just about every job. The kit includes 20′ and 30′ drill driven brushing shafts and 8 brushes. Brushes selection outfits you to clean flex duct, round pipe, rectangular duct, dryer vents and more. This rotary brushing cable and system is designed to be used with a clutch enabled drill.
-
CAS300 – Deluxe Hurricane Package
$565.00Deluxe Hurricane Package. The Deluxe Hurricane Package includes the compressed air whips and blow nozzles needed to outfit an Air Duct Cleaner with the tools necessary to tackle most Residential and Light Commercial Air Duct and Dryer Vent Cleaning Jobs. This kit comes complete with two lead lines, 9 compressed air whips/nozzles, high power blow gun, and replacement whip material, Hurricane Riser Ball, and Hurricane Register Wand.
-
CMP002 – 8.5 HP Honda Powered Portable Air Compressor
8.5 HP Honda Powered Portable Air Compressor. This air compressor produces 16 CFM @ 175 PSI. The 10 gallon tank provides air storage suitable for a single technician and Hurricane tools. This portable air compressor features a wheel barrow setup with a large no-flat wheel, and a 4-point landing pad that removes the load from the wheel when at rest. Air manifold features (2) 1/4″ quick connect couplers and a pressure regulator that can be adjusted from 0 PSI to full tank pressure. This compressor will load and unload at 145-175 PSI and is most suitable for dryer vent cleaning and light duty HVAC air duct cleaning operations. This engine is equipped with an electric start package, however a 12-volt battery is not supplied to power the starter motor. All piston compressors are rated for 50% duty-cycle. This air compressor is Proudly Manufactured in the USA.
-
CMP006 – 14 HP Tankless Screw Air Compressor
$6,695.0014 HP Tankless Screw Air Compressor. The CMP006 portable screw air compressor provides all the benefits of efficiency, constant air flow, low noise factor, and a reasonable price all into one compact unit. The CMP006 is built on a 3-wheel portable cart with a locking caster and push/pull handle. The CMP006 provides 30 CFM of constant airflow at 150 PSI, for compressed air performance that even the most taxing air duct cleaning crews need. The CMP006 is ideal for running compressed air tools from the Hurricane, 1/2″ Typhoon, Viper, Scorpion, and Dust-Devil product lines. The CMP006 can become even more productive with an in-line surge tank of 30-60 gallon to maintain higher line pressures and provide compressed tool performance for up to 3 users.
-
CMP006E – 7.5 HP, 230V, 3-Phase Tankless Screw Air Compressor
$7,200.007.5 HP, 230V, 3-Phase Tankless Screw Air Compressor. The CMP006E portable screw air compressor provides all the benefits of portability in a building, efficiency, constant air flow, low noise factor, and a reasonable price all into one compact unit. The CMP006E is built on a portable caster cart. The CMP006E provides 30 CFM of constant airflow at 150 PSI, for compressed air performance that even the most taxing air duct cleaning crews need. The CMP006E is ideal for running compressed air tools from the Hurricane, 1/2″ Typhoon, Viper, Scorpion, and Dust-Devil product lines. The CMP006E can become even more productive with an in-line surge tank of 30-60 gallons to maintain higher line pressures and provide compressed tool performance for up to 3 users. The CMP600E is also available mounted on a tank for semi-permanent installation, not shown in the picture.
-
DSR222 – RE-500 Interior Coating/Insulation Encapsulant – Black
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR232 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – Black
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR241 – Pan-Grip Burst Bag
$46.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR243 – Pan-Grip 1 gallon kit
$293.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
ENG142 – 5 Gallon SureCan Gas Can
$55.00ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
ENG143 – 2.2 Gallon SureCan Gas Can
$45.00ENG143 – 2.2 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
GBC001 – General Filter Bag.
$208.00General Filter Bag. 4′ diameter x 7′ tall washable cloth bag. Sits atop dust collection bucket (not included), and is stabilized by guide rods (not included).
-
GBC002 – Ranger Filter Bag.
$251.00Ranger Filter Bag. 4′ diameter x 10′ tall washable cloth filter bag. Sits atop dust collection bucket (not included), and stabilizes with guide rods (not included). AKA: Oversize General Bag
-
GBC006 – Duct Truck Dust Filter Bag, 6-Pack
$217.00Duct Truck Dust Filter Bag. Replacement filters measure 20″ in diameter and 60″ in length. Filters will fit on collars up to 20″. Filters are sold in 6-Packs.
-
GEL001 – HEPA Filtered Electrak 1 Power Vacuum.
$5,500.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2023/10/Poster_Electrak.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/Electrak_1.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_Electrak_1.pdf"]
The NEWLY UPDATED S.M.A.R.T HEPA Filtered Electrak 1 Power Vacuum. The Electrak 1 is how great filtration and portability come together. 2,200 working CFM, 9″ static, Portable Design, and Hospital Grade HEPA Filtration. Are you tired of popping circuit breakers? The Electrak 1 Power Vacuum Collector makes this problem go away. Cruise on AMPERAGE with S.M.A.R.T. (Sensor Managed Air Responsive Technology), and gain control of your filter changes with Filter Minders on every stage of filtration.
If HVAC Air Duct Cleaning is your company’s main discipline or if it’s an ADD-ON Service, The Electrak 1 is the Vacuum/Collector to consider for jobs in Single Family Homes, Condominiums, Apartments, Office Buildings, Clean Rooms, and Hospitals. The Electrak 1 comes standard with the industry’s best filtration, comprised of 3 stages to first remove large debris in the first stage cube filter, remove dirt and dust particles to ASHRAE 95% Efficiency in the second stage filter, and finally Hospital Grade Class 100 Air is expelled from the final stage HEPA filter.
The Electrak 1 cabinets are constructed of ALL ALUMINUM to provide superior strength with minimal weight. The integral hand-truck uses 10″ no-flat wheels to aid in transport over all surfaces including hard floors, carpet, grass & turf, stone/chip parking lots, and when traversing up and down stairways. 5″ pivoting casters allow for easy steering, and the removeable HEPA cabinet has (2) chest handles, and (4) pivoting casters for easy maneuvering.
Airflow with The Electrak 1 is optimized through the combination of all it’s systems: Large Filtration, 12″ Standard Hose Inlet, Variable Frequency Drive. The Variable Frequency Drive, or VFD, allows for the Electrak 1 to have the flexibility to run on any 110-VOLT electrical circuit, and operate on Amperage Loads from 1/2 AMP – 20 AMPS. Additionally, as dirt and debris are removed from the HVAC Air Duct System, the filters become clogged and more efficient. This process naturally reduces the volumetric airflow of the vacuum system, diminishing it’s efficiency. The Electrak’s VFD is able to overcome this natural phenomenon by over-speeding the motor to create higher than normal Static Pressure, and continue moving air through the vacuum/collector. To put things simply, the VFD system on the Electrak allows for the vacuum system to maintain the maximum airflow through the filters taking into account the filter load and amperage available.
When your HVAC Air Duct Cleaning Operation puts you in situations with large/oversize ductwork, or large buildings, use multiple Electrak 1 Vacuum/Collectors to increase volumetric airflow, and tackle small system components quickly.
-
GEN200 – 20 HP General Power Vacuum.
$5,200.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/General.pdf" title="General.PDF Download"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_GENERAL.pdf"]
20 HP General Power Vacuum. The General is All the Vacuum You’ll Need for Duct Cleaning. Kohler Command Engine, 5,250 CFM, Portable 4-Wheel Cart.
If your Air Duct Cleaning Crew needs a vacuum collector with Serious Suction… Look No Further. The General delivers ‘Duct-Truck’ like performance at a fraction of the price and without being tied to the curb.
The General is the vacuum/collector you need for a powerful start in the air duct cleaning business. The General has the versatility to tackle residential, light commercial, and indsutrial application cleaning projects.
The General is a high powered Gas Portable Air Duct Cleaning Vacuum that features a portable four-wheeled cart for placement at the job-site in the most opportunistic spot. On many residential air duct cleaning projects, the General can be connected to the air duct system with 50′-75′ of vacuum hose, allowing for maximum airflow by the vacuum.
Excessive hose runs, and long setup times are a thing of the past when your cleaning crew operates The General. With average hose runs between 50′-75′, setup times for a two-man crew can be limited to 10 minutes; storing truck-loads of bulky hose for residential cleaning projects can be a problem of the past.
The material handling fan-wheel on The General, allows for constant airflow of 5,250 CFM through the entire cleaning process. Dirty filters in the airstream are a non-issue with The General. An oversize cloth filter bag acts as the filter device, and a large cannister collects removed debris for disposal.
As air duct cleaning projects increase in size, airflow should in turn also increase. The coupling of two General power vacuums together is an effective, low cost method for increasing airflow on projects that demand it. In light commercial and industrial applications, The General is capable of pulling through hose-runs up to 250′ in length. The General is also available with Alternate Fuel/Power Options including LP-GAS and Electric Motor. For industrial applications that allow the combustion of LP-GAS engines indoors, bring The General indoors to reduce hose runs and increase airflow. Filtration cabinets are available for LP-GAS and Electric Powered vacuum arrangements that can provide CLASS 100, HEPA filtered air.
The General Air Duct Cleaning system can be comfortably set-up in a box truck or enclosed trailer, sized 6′ x 12′ or larger. Complete cleaning packages are available for all applications including residential, light commercial, industrial, and other special arrangements. Plan your custom package with the sales team, or choose from the popular arrangments that include The General, a powerful air compressor, vacuum hose, compressed air cleaning whips, duct brushes, tools, and materials necessary to access and make proper closure to many types of ductwork.
-
GEN401 – 31 HP Ranger Power Vacuum.
$8,900.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/Ranger.pdf"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_Ranger.pdf"]
31 HP Ranger Power Vacuum. The Ranger is More Power for Duct Cleaning. Briggs & Stratton Engine, 7,000 CFM, Portable 4-Wheel Cart. The Ranger comes complete with a 6-gallon OSHA/EPA fuel tank attached to the machine. Items included in vacuum package: 10′ tall filter bag (GBC002), dust collection bucket & clamp (GEN007), stainless steel guide rods (GEN026). Vacuum hose is not included in vacuum package. The Ranger is compatible with the HUM-V Assist Drive System, ordered as an additional item with your Ranger.
The Ranger is the vacuum/collector that will give you a competitive edge in the air duct cleaning business. The Ranger has the versatility to tackle residential, light & heavy commercial, and indsutrial application cleaning projects. The Ranger is a high powered Gas Portable Air Duct Cleaning Vacuum that features a portable four-wheeled cart for placement at the job-site in the most opportunistic spot. On many residential air duct cleaning projects, the Ranger can be connected to the air duct system with 50′-75′ of vacuum hose, allowing for maximum airflow by the vacuum. Excessive hose runs, and long setup times are a thing of the past when your cleaning crew operates The Ranger. With average hose runs between 50′-75′, setup times for a two-man crew can be limited to 10 minutes; storing truck-loads of bulky hose for residential cleaning projects can be a problem of the past.
With the Ranger, you’ll have more airflow available than most truck mount vacuums can deliver to the duct. The material handling fan-wheel on The Ranger, allows for constant airflow of 7,000 CFM through the entire cleaning process. Dirty filters in the airstream are a non-issue with The Ranger. An oversize cloth filter bag acts as the filter device, and a large cannister collects removed debris for disposal. As air duct cleaning projects increase in size, airflow should in turn also increase. The coupling of two Ranger power vacuums together is an effective, low cost method for increasing airflow on projects that demand it. In light commercial and industrial applications, The Ranger is capable of pulling through hose-runs up to 300′ in length. The Ranger is also available with Alternate Fuel/Power Options including LP-GAS and Electric Motor. For industrial applications that allow the combustion of LP-GAS engines indoors, bring The Ranger indoors to reduce hose runs and increase airflow. Filtration cabinets are available for LP-GAS and Electric Powered vacuum arrangements that can provide CLASS 100, HEPA filtered air.
The Ranger Air Duct Cleaning system can be comfortably set-up in a box truck or enclosed trailer, sized 6′ x 12′ or larger. Complete cleaning packages are available for all applications including residential, light commercial, industrial, and other special arrangements. Plan your custom package with the sales team, or choose from the popular arrangments that include The Ranger, a powerful air compressor, vacuum hose, compressed air cleaning whips, duct brushes, tools, and materials necessary to access and make proper closure to many types of ductwork.
-
GEN900 – HUM-V Assist Drive Kit
From $1,750.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/HUM-V.pdf"]HUM-V Assist Drive ADD-ON Package for General, Ranger, or Major. The HUM-V Assist Drive provides additional power to help technicians navigate the vacuum over turf or sloped terrain. The HUM-V is designed with a 1/2-HP electric motor that is powered by the 12V battery on the vacuum. The HUM-V moves FOWARD & REVERSE at a steady 3 MPH pace, with a single wheel drive. The HUM-V is a normally neutral system that allows the vacuum to free wheel without any drive engagement. Available as WEBSITE SALES on NEW Equipment ONLY. Purchasing HUM-V requires the addition of a Power Vacuum to your order. HUM-V Vacuum Packages are built to order; please allow extra for delivery. If you would like to Add HUM-V as a RETRO-FIT to your existing vacuum, call for details 800-728-3828.
-
GEN930 – OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums
$348.00OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums. The bolt-on fuel cell kit comes with drill templates for retro-fit on older vacuums, new vacuums are pre-drilled and ready for installation. The kit includes a 6-gallon Flambeau tank, a heavy duty frame, the required hoses, and all the necessary hardware. Installation of this kit removes the necessity of detatchable fuel cells and any quick-disconnect fittings. Add this item to your new vacuum purchase. Carbon cannister (GEN933) not included. For CARB compliancy add P/N: GEN933 to your order.
-
HCT019 – Lenox/Hilmor Duct Knife.
$26.00Lenox/Hilmor Duct Knife. Professional quality hand tools are a must on the job site. Never be without a dual sided, specially purposed Duct Knife when the job requires. Make clean cuts through duct insulation or duct board.
-
HDG008 – 8″ x 25′ Gator Vacuum Hose.
$275.008″ x 25′ Gator Vacuum Hose. 8″ Gator Vacuum Hose is clear and green with polyolefin and polypropylene construction. 8″ Gator hose has an external all plastic helix and a smooth bore. 8″ Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.
-
INS060 – Handheld Video Endoscope with Snapshot and Video Function. (w/ Screen)
$395.00Handheld Video Endoscope with Snapshot and Video Function with 4-1/2″ HD Screen. Use the Handheld Video Endoscope to make fast and critical video inspections in all duct work, through registers, and into components. The Handheld Video Endoscope features a color camera, 3 Meter (10-Foot) optic cable, adjustable LED lighting on the camera head, and a bright LED flashlight built into the handle. This item comes complete with 4.5″ color LCD display and can record still photographs and video with sound onto the 32GB MICRO-SD (TF-CARD) that is PRE-INSTALLED. This unit is powered by a USB-Rechargeable Lithium Battery. Optic cable comes with detachable accessories: magnet, 90-degree mirror, hook.
-
INS100 – Video Inspection Push Cable System.
$2,148.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/04/INS100.pdf"] [pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/INS100.pdf"]
Video Inspection Push Cable System. The High Quality Video Inspection Push Cable Inspection System can be deployed on any job-site for inspection up to 100′ into the system. The water-resistant camera head makes this system ideal for dry overhead ductwork, as well as subterranean ducts that may have taken on water or waste. The system records on SD Card for quick and easy transfer of files. The camera head can be corrected by indexing 90 degrees. Variable intensity LED lighting allows the operator to view the camera subject with clarity in all duct work. 7″ HD Color Display allows for still photos and video to be directly recorded onto SD-Card. Display also allows for connetion of external display or remote viewing headset. The system can be operated on battery power or while plugged into standard 110V electrical.
-
PAT223-16 – Hinged-PSA Access Door,16″x16″
$17.00Hinged Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-24 – Hinged-PSA Access Door,24″x24″
$83.00Hinged Access Door for Sheet Metal Duct Work. 24″ x 24″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-12 – Cammed-PSA Access Door,12″x12″
$29.00Cammed Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PPE002 – Water Proof Booties
$21.00Water Proof!!! Booties for Boots up to Size 13. These Booties provide the shoe covering you’ll need to feel comfortable walking through your customer’s home. On wet or rainy days, protect your customer’s home with Water Proof Booties!!! Booties come in a box of 50 pairs.
-
PPE022 – Honeywell North Full-Face Respirator – Medium/Large
$201.00HONEYWELL NORTH FULL FACE RESPIRATOR – M/L. SCRATCH RESIST 200 DEG POLY-CARB LENS. THREADED FILTER & CARTRIDGE ATTACHMENT. FILTERS/CARTRIDGES SOLD SEPARATE
-
PPE025 – Honeywell VAPOR/GAS/P100 Combo-Cartridge
$47.00HONEYWELL NORTH RESPIRATOR FILTER/CARTRIDGE COMBO. THREADS ONTO NORTH HALF/FULL FACE RESPIRATORS. ORGANIC VAPOR / ACID GAS / P100 FILTER.(SOLD AS A 2-PACK)
-
RDC102 – 8″ x 8″ x 10″ Y-Hose Splitter.
$254.008″ x 8″ x 10″ Y-Hose Splitter. Adapt your vacuum hose run from ONE 10″ diameter hose to TWO 8″ diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10″ diameter hose to TWO 8″ diameter hoses. Other sizes are available on Special Order.
