Shop – Meyer Machine Supply & Equipment

steroids for sale fast shipping steroids for sale online anabolic steroids for sale

1-800-728-3828

Meyer Machine Supply & Equipment

Add to cart

AGR400 – Pneumatic Rotary Brushing Package
$2,065.00
24 in nylon brush assembly, 24 in silica carbide brush assembly, 12 in nylon brush assembly, 12 in silica carbide brush assembly, Reversible air motor, Guide system, Multi-positional core assembly, (3) Sets of guide legs (adjust brush height in 1 in increments from 3 in to 11 in), 36 in extension rod with couplers, (4) 60 in extension rod with couplers, On/off control and pressure regulator, Forward air sweep assembly, (1) Reverse air sweep assembly, (1) Rugged road case

Add to cart
Add to cart

AGR601 – Residential Button-Lock Rotary Brushing Kit
$617.00
Residential Button-Lock Rotary Brushing Kit. The Residential Button-Lock Rotary Brushing Kit provides the brushes you’ll need to tackle just about every job. The kit includes 20′ and 30′ drill driven brushing shafts and 8 brushes. Brushes selection outfits you to clean flex duct, round pipe, rectangular duct, dryer vents and more. This rotary brushing cable and system is designed to be used with a clutch enabled drill.

Add to cart
Add to cart

AGR603 – Button-Lock Dryer Vent Rotary Brushing Kit
$279.00
Button-Lock Dryer Vent Rotary Brushing Kit. This kit contains a 30′ brushing shaft, and a 4″ & 6″ abrasive brush. Use this brush kit to chew through the toughest lint clogs and pull them back for containment.

Add to cart
Add to cart

AGR611 – 20′ Standard-Duty Residential Button-Lock Rotary Brushing Cable
$181.00
20′ Standard-Duty Residential Button-Lock Rotary Brushing Cable. The AGR611 is part of the AGR6XX series brush system and works with all AGR6XX series button-lock brushes. The Standard-Duty cable is designed for use with brushes 16″ in diameter and smaller. The rotating inner core (AGR692) is field replaceable, to allow for minimal down-time in the case of an over-torque breakage. This rotary brushing cable and system is designed to be used with a clutch enabled drill. An optional adaptor (AGR689) can be used to connect AGR5XX series twisted wire core brushes.

Add to cart
Add to cart

AGR612 – 30′ Standard-Duty Residential Button-Lock Rotary Brushing Cable
$222.00
30′ Standard-Duty Residential Button-Lock Rotary Brushing Cable. The AGR612 is part of the AGR6XX series brush system and works with all AGR6XX series button-lock brushes. The Standard-Duty cable is designed for use with brushes 16″ in diameter and smaller. The rotating inner core (AGR692) is field replaceable, to allow for minimal down-time in the case of an over-torque breakage. This rotary brushing cable and system is designed to be used with a clutch enabled drill. An optional adaptor (AGR689) can be used to connect AGR5XX series twisted wire core brushes.

Add to cart
Add to cart

AGR631-04 – 4″ Soft Button-Lock Brush
$28.00
4″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR631-08 – 8″ Soft Button-Lock Brush
$29.00
8″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR632-12 – 12″ Soft Button-Lock Brush
$36.00
12″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR641-08 – 8″ Stiff Button-Lock Brush
$29.00
8″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR642-12 – 12″ Stiff Button-Lock Brush
$36.00
12″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR642-16 – 16″ Stiff Button-Lock Brush
$41.00
16″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR652-08 – 8″ Corner Button-Lock Brush
$39.00
8″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR652-12 – 12″ Corner Button-Lock Brush
$41.00
12″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR653-24 – 24″ Corner Button-Lock Brush
$78.00
24″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods. This brush should be used with a Heavy-Duty Cable ONLY, AGR613-AGR615.

Add to cart
Add to cart

AGR653-30 – 30″ Corner Button-Lock Brush
$93.00
30″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods. This brush should be used with a Heavy-Duty Cable ONLY, AGR613-AGR615.

Add to cart
Add to cart

AGR661-04 – 4″ Abrasive Button-Lock Brush
$29.00
4″ Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR661-06 – 6″ Abrasive Button-Lock Brush
$30.00
6″ Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

AGR695 – AGR6XX Series Extension Rod (BREXXX) Retro-Connector
$18.00
AGR6XX Series Extension Rod (BREXXX) Retro-Connector. Use this adaptor to allow the use of AGR600 series brushes with your existing (BREXXX) extension rods, with 1/4″NPT and 5/16″-18 threads

Add to cart
Add to cart

BRE045 – 3/8″ Fiberglass Extension Brush Rod.
Rated 4.00 out of 5
$10.00
3/8″ Fiberglass Extension Brush Rod. This is 48″ long and provides a rigid extension for duct brushes. Brush rod uses 1/4″ NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

BRE049 – 3/8″ Nylon Extension Brush Rod.
$19.80
3/8″ Nylon Extension Brush Rod. This is 48″ long and provides a flexible extension for duct brushes. Brush rod uses 1/4″ NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

BRE050 – 5/16″ Nylon Extension Brush Rod.
$13.00
5/16″ Nylon Extension Brush Rod. This is 48″ long and provides a very flexible extension for duct brushes. Brush rod uses a 5/16″-18 threaded connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

BRE072 – 3/8″ Fiberglass Extension Brush Rod.
$13.00
3/8″ Fiberglass Extension Brush Rod. This is 72″ long and provides a rigid extension for duct brushes. Brush rod uses 1/4″ NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

Add to cart
Add to cart

CAS104 – 3/8″ dia. x 50′ Compressed Air Hose.
$78.00
3/8″ dia. x 50′ Compressed Air Hose. This Goodyear Compressed Air Hose is rated for 300 PSI and comes with standard 1/4″ airline fittings. On the male connector side, this hose has a strain relief to extend the life of the hose at the connection site.

Add to cart
Add to cart

CAS119-F – 5′ Flexible Hurricane Rod
$26.00
5′ Flexible Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Flexible Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.

Add to cart
Add to cart

CAS119-M – 5′ Medium Hurricane Rod
$26.00
5′ Medium Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Medium Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.

Add to cart
Add to cart

CAS119-R – 5′ Rigid Hurricane Rod
$32.00
5′ Rigid Hurricane Rod. Rigid Hurricane Rods are the ideal tool for compressed air cleaning of duct work in large commercial settings. Use the 5′ Rigid Hurricane Rods to connect extensions to reach down straight duct work in excess of 30′ and well over 100′ in length.

Add to cart
Add to cart

CAS120 – Hurricane Power Blow Nozzle.
$34.00
Hurricane Power Blow Nozzle. The Hurricane Power Blow Nozzle has a venturi tip that allows extreme velocity and volumetric flow. Use the Hurricane Power Blow Nozzle for air washing register covers and other hard surfaces. The Hurricane Power Blow Nozzle has a trigger for variable flow and a hook for a quick hang on your tool belt. Trigger has standard 1/4″ air hose connection.

Add to cart
Add to cart

CAS130 – Hurricane Trigger Valve
$30.00
Hurricane Trigger Valve, or Dryer Vent Line Trigger. The Hurricane Trigger Valve is a hand held trigger to operate air-flow through the Hurricane Dryer Vent Line or Rigid Hurricane Extension Rods. Trigger has standard 1/4″ air hose connection, and Rectus quick connect coupler.

Add to cart
Add to cart

CAS135 – Hurricane Forward Whip with Jets.
$31.00
Hurricane Forward Whip with Jets. The Hurricane Forward Whip combines the forward force of jets and a 12″ medium pressure whip tentacle. This tools is ideal for aggressive cleaning in round steel ductwork. Whip tentacles can be replaced and cut to custom length. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS136 – Hurricane Reverse Whip with Jets.
$31.00
Hurricane Reverse Whip with Jets. The Hurricane Reverse Whip combines the forward force of jets and a 12″ medium pressure whip tentacle. This tools is ideal for aggressive cleaning in round steel ductwork. Whip tentacles can be replaced and cut to custom length. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS137 – Hurricane Single Tentacle Whip
$21.00
Hurricane Single Tentacle Whip. The Hurricane Single Whip is the most aggressive whip in the Hurricane System. The Hurricane Single Whip can be ordered in 18″ or 26″ length with high pressure whip material. Use the Hurricane Single Whip to clean rectangular steel duct work, or large diameter round duct work. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS139 – 6 Hole – Hurricane Forward Flow Duct Ball.
$26.00
6 Hole – Hurricane Forward Flow Duct Ball. The Hurricane Forward Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Forward Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS140 – Hurricane Reverse Flow Duct Ball.
$26.00
Hurricane Reverse Flow Duct Ball. The Hurricane Reverse Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Reverse Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS141 – Heavy-Duty Hurricane Dryer Vent Line.
$93.00
Heavy-Duty Hurricane Dryer Vent Line. The Heavy-Duty Hurricane Dryer Vent Line is a 30′ flexible tubing with a high velocity reverse bullet. The Heavy-Duty Dryer Vent Line requires a Dryer Vent Line Trigger (CAS130) or Hurricane Line (CAS148/CAS149) for operation. The Heavy-Duty Dryer Vent Line propels itself through duct work, breaking clogs and blowing loose material back through the opening. Heavy-Duty Line is designed for extreme heat conditions. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS142 – Hurricane Dryer Vent Line.
$47.00
Standard Hurricane Dryer Vent Line. The Hurricane Dryer Vent Line is a 30′ flexible tubing with a high velocity reverse bullet. The Dryer Vent Line requires a Dryer Vent Line Trigger (CAS130) or Hurricane Line (CAS148/CAS149) for operation. The Dryer Vent Line propels itself through duct work, breaking clogs and blowing loose material back through the opening. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS143 – Hurricane Register Cover Wand Tool.
$24.00
Hurricane Register Cover Wand Tool. The Hurricane Register Cover Wand Tool is ideal for reaching through tight spaces to perform compressed air cleaning. Use the Register Cover Wand to reach through painted on floor registers or linear difusers. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS144 – High Pressure/Flow Replacement Whip Material.
$2.50
High Pressure/Flow Replacement Whip Material. The high pressure whip material is ideal for aggressive cleaning applications such as on a Single Tentacle Plain Whip. Material is sold by the foot and can be cut to desired length.

Add to cart
Add to cart

CAS145 – Medium Pressure/Flow Replacement Whip Material.
$2.50
Medium Pressure/Flow Replacement Whip Material. The medium pressure whip material is ideal for semi-aggressive cleaning applications such as on a Forward or Reverse Whip with Jets. Material is sold by the foot and can be cut to desired length.

Add to cart
Add to cart

CAS146 – Low Pressure/Flow Replacement Whip Material.
$2.50
Low Pressure/Flow Replacement Whip Material. The low pressure whip material is ideal for finesse cleaning applications such as on a compressed air whip. Material is sold by the foot and can be cut to desired length.

Add to cart
Add to cart

CAS148 – 20′ Hurricane Line.
$103.00
20′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.

Add to cart
Add to cart

CAS149 – 30′ Hurricane Line.
$120.00
30′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.

Add to cart
Add to cart

CAS154 – 12 Hole – Hurricane Forward Flow Duct Ball
$31.00
12 Hole – Hurricane Forward Flow Duct Ball. The Hurricane Forward Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Forward Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a 12- hole Hurricane Forward Flow Duct Ball for increase air flow and performace compared to a 6-Hole duct ball. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS155 – 12 Hole – Hurricane Reverse Flow Duct Ball
$31.00
12 Hole – Hurricane Reverse Flow Duct Ball. The Hurricane Reverse Flow Duct Ball provides a gentle cleaning technique can that be used on many types of duct work and in many situations. A Reverse Flow Duct Ball is ideal for air sweep after any duct brushing procedure. Use a 12- hole Hurricane Reverse Flow Duct Ball for increase air flow and performace compared to a 6-Hole duct ball. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS159 – 3/8″ dia. x 100′ Compressed Air Hose.
$119.00
3/8″ dia. x 125′ Compressed Air Hose. This Goodyear Compressed Air Hose is rated for 300 PSI and comes with standard 1/4″ airline fittings. On the male connector side, this hose has a strain relief to extend the life of the hose at the connection site.

Add to cart
Add to cart

CAS170 – Hurricane Triple Whip.
$37.00
Hurricane Triple Whip. The Hurricane Triple Whip has three tentacles and can be used for either a ‘PUSH’ or ‘PULL’ cleaning method. The Hurricane Triple Whip has a better coverage rate than a single whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS171 – Hurricane Triple Whip Replacement Tentacles.
$9.00
Hurricane Triple Whip Replacement Tentacles. Triple Whip Replacement Tentacles come in a set of three pieces. Tentacles can be replaced into the Hurricane Triple Whip and cut to desired length.

Add to cart
Add to cart

CAS174 – Hurricane Spider Whip.
$42.00
Hurricane Spider Whip. The Hurricane Spider Whip has eight tentacles and can be used in forward direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS174-R – Hurricane Reverse Spider Whip.
$47.00
Hurricane Reverse Spider Whip. The Hurricane Reverse Spider Whip has eight tentacles and can be used in reverse direction. The Hurricane Spider Whip has a better coverage rate than a single or triple whip, but less aggressive whipping action. This tool is ideal for cleaning trunk lines or main ducts. It is recommended to use 2-1/2″ hole saw and duct plug for access openings. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS175 – Hurricane Spider Whip Replacement Tentacles.
$16.00
Hurricane Spider Whip Replacement Tentacles. Spider Whip Replacement Tentacles come in a set of eight pieces. Tentacles can be replaced into the Hurricane Spider Whip and cut to desired length.

Add to cart
Add to cart

CAS178 – Reverse Spinning Duct Ball with 4″ Lead.
$42.00
Reverse Spinning Duct Ball with 4″ Lead. The Reverse Spinning Duct Ball with 4″ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS179 – Reverse Spinning Duct Ball with 25′ Lead.
$88.00
Reverse Spinning Duct Ball with 25′ Lead. The Reverse Spinning Duct Ball with 25′ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS181 – Forward Spinning Duct Ball with 4″ Lead.
$42.00
Forward Spinning Duct Ball with 4″ Lead. The Forward Spinning Duct Ball with 4″ Lead is a versatile tool for residential and light commerical Air Duct Cleaning. The Forward Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Forward Spinning Duct Ball is compatible with the Hurricane Whip System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS182 – Hurricane Tool Riser Ball
$26.00
Hurricane Tool Riser Ball. Use the Hurricane Tool Riser Ball to make your Hurricane and compressed air duct cleaning tools more effective within the duct. Just by raising the Hurricane compressed air tool over the duct surface, the blast of air or whip tentacle can move more freely and provide a better air scrubbing technique. Standard Hurricane/Rectus plug and coupler attachments. Use a Hurricane Line (CAS148/CAS149) or compatible to interface this item with 1/4″ standard interchange airline fittings.

Add to cart
Add to cart

CAS201 – Residential Hurricane Package.
$335.00
Residential Hurricane Package. The Residential Hurricane Package includes the compressed air whips and blow nozzles needed to get started cleaning Air Ducts. This kit comes complete with two lead lines and 6 compressed air whips/nozzles.

Add to cart
Add to cart

CAS300 – Deluxe Hurricane Package
$565.00
Deluxe Hurricane Package. The Deluxe Hurricane Package includes the compressed air whips and blow nozzles needed to outfit an Air Duct Cleaner with the tools necessary to tackle most Residential and Light Commercial Air Duct and Dryer Vent Cleaning Jobs. This kit comes complete with two lead lines, 9 compressed air whips/nozzles, high power blow gun, and replacement whip material, Hurricane Riser Ball, and Hurricane Register Wand.

Add to cart
Add to cart

CAS400 – Compressed Air Dryer Vent Cleaning Kit
$265.00
Compressed Air Dryer Vent Cleaning Kit. This Compressed Air Dryer Vent Cleaning Kit is designed for contractors that want to clean 4″ Residential Dryer Vents with compressed air. This kit includes a 20′ Hurricane Line, Forward and Reverse Duct Ball, and a (2) Standard 30′ Dryer Vent Line with Trigger. Operation of this kit is best when powered by an air compressor capable of producing at least 15 CFM @ 175 PSI.

Add to cart
Add to cart

CAS401 – Heavy-Duty Compressed Air Dryer Vent Cleaning Kit
$360.00
Heavy-Duty Compressed Air Dryer Vent Cleaning Kit. This Compressed Air Dryer Vent Cleaning Kit is designed for contractors that want to clean 4″ Residential Dryer Vents with compressed air. This kit includes a 20′ Hurricane Line, Forward and Reverse Duct Ball, and a (2) Heavy-Duty 30′ Dryer Vent Line with Trigger. Operation of this kit is best when powered by an air compressor capable of producing at least 15 CFM @ 175 PSI. Heavy-Duty Line is designed for extreme heat conditions.

Add to cart
Add to cart

CAS500 – 1/2″ Typhoon Cleaning Kit x 50′
$610.00
1/2″ Typhoon Cleaning Kit. The 1/2″ Typhoon Kit is a reverse air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 30 CFM. The 1/2″ Typhoon Cleaning Kit comes complete with 50′ light-weight air hose, 1/2″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1/2″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.

Add to cart
Add to cart

CAS501 – 1/2″ Typhoon Cleaning Kit x 100′
$810.00
1/2″ Typhoon Cleaning Kit. The 1/2″ Typhoon Kit is a reverse air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 30 CFM. The 1/2″ Typhoon Cleaning Kit comes complete with 100′ light-weight air hose, 1/2″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1/2″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.

Add to cart
Add to cart

CAS505 – 1″ Typhoon Cleaning Kit x 100′
$920.00
1″ Typhoon Cleaning Kit. The 1″ Typhoon Kit is an air sweep tool for use with high volume air compressors (HVLP) that produce in excess of 50 CFM. The 1″ Typhoon Cleaning Kit comes complete with 100′ lay-flat air hose, 1″ Typhoon Cleaning Tip, and a full port shut-off ball valve. The 1″ Typhoon Cleaning Kit uses 2-Claw Universal Couplings.

Add to cart
Add to cart

CAS510 – Twister Riser Cleaning Kit
$2,775.00
Twister Riser Cleaning Kit. The Twister Riser Cleaning Kit is the GO-TO-Tool for air sweep cleaning of vertical risers. The Twister Riser Cleaning Kit blasts a rotating stream of air that sweeps the surface of a vertical riser sized 30″ or less. The Twister Riser Cleaning Kit is for use with high volume compressors (HLPV) that produce in excess of 75 CFM. The Twister Riser Cleaning Kit comes complete with 100′ lay-flat hose and shut-off valve. The Twister Riser Cleaning Kit uses 2-claw Universal Couplings.

Add to cart
Add to cart

CAS520 – HVLP Foot Pedal Switch
$725.00
HVLP Foot Pedal Switch. Use the HVLP Foot Pedal Switch to reduce the number of hands required to operate HVLP cleaning tools and increase productivity. The HVLP Foot Pedal Switch fits inline to your HVLP Cleaning tools. The HVLP Foot Pedal Switch uses 2-claw Universal Couplings.

Add to cart
Add to cart

CCV002 – Hose Coupling Wrap with Hook & Loop.
$38.00
Hose Coupling Wrap with Hook & Loop. The Hose Coupling Wrap with Hook & Loop provides a protective wrap around your vacuum hose connections. Are you looking for extra protection around your hose sleeves, use the the Hose Coupling Wrap with Hook & Loop on vacuum hoses from 6″ – 12″ diameter.

Add to cart
Add to cart

CLP004 – 2″ – 12″ Adjustable Hose Clamp
$5.00
2″ – 12″ Adjustable Hose Clamp. Use this 2″ – 12″ Adjustable Hose Clamp to secure vacuum hoses to inlet collars, duct adaptor collars, hose sleeves & reducers, or any other place you hook vacuum hoses up. This quick clamp allows for 5/16″ nut driver or screw driver to tighten, and screw mechanism flips up for quick tighten and release.

Add to cart
Add to cart

CLP010 – 3/8″ Pinch Clamp
$2.00
3/8″ Pinch Clamp. Use the 3/8″ Pinch Clamp for reconnection of 3/8″ O.D. tubing or hose on 1/4″ hose barb. Crimping tool is necessary to create proper closure of clamp.

Add to cart
Add to cart

CLP011 – 9/16″ Pinch Clamp
$2.00
9/16″ Pinch Clamp. Use the 9/16″ Pinch Clamp for reconnection of 1/2″-9/16″ O.D. tubing on hose barb. Crimping tool is necessary to create proper closure of clamp.

Add to cart
Add to cart

CLP019 – 5/8″ Pinch Clamp
$2.00
5/8″ Pinch Clamp. Use the 5/8″ Pinch Clamp for reconnection of 5/8″ O.D. tubing on 3/8″ hose barb. Crimping tool is necessary to create proper closure of clamp.

Add to cart
Add to cart

CLP021 – 10″ Quick Clamp
$26.00
10″ Quick Clamp. The 10″ Quick Clamp is the fastest way to secure your washable filter bag to the General and Ranger power vacuum. The 10″ Quick Clamp fits around collar sizes that measure 10″ diameter and comes with a cotter pin for locking.

Add to cart
Add to cart

CMP001 – 5.5 HP Portable Air Compressor
$1,216.00
5.5 HP Portable Air Compressor. This air compressor produces 12 CFM @ 125 PSI. The 10 gallon tank provides air storage suitable for a single technician to tackle residential dryer vent cleaning jobs with select Hurricane tools.

Add to cart
Add to cart

CMP001E – 2 HP Portable Electric Air Compressor
$1,253.00
2 HP Portable Electric Air Compressor. This air compressor produces 7 CFM @ 125 PSI. The 10 gallon tank provides air storage suitable for a single technician to tackle residential dryer vent cleaning jobs with select Hurricane tools.

Add to cart
Read more

CMP002 – 8.5 HP Honda Powered Portable Air Compressor

8.5 HP Honda Powered Portable Air Compressor. This air compressor produces 16 CFM @ 175 PSI. The 10 gallon tank provides air storage suitable for a single technician and Hurricane tools. This portable air compressor features a wheel barrow setup with a large no-flat wheel, and a 4-point landing pad that removes the load from the wheel when at rest. Air manifold features (2) 1/4″ quick connect couplers and a pressure regulator that can be adjusted from 0 PSI to full tank pressure. This compressor will load and unload at 145-175 PSI and is most suitable for dryer vent cleaning and light duty HVAC air duct cleaning operations. This engine is equipped with an electric start package, however a 12-volt battery is not supplied to power the starter motor. All piston compressors are rated for 50% duty-cycle. This air compressor is Proudly Manufactured in the USA.

Read more
Add to cart

CMP002E – 5 HP Electric Powered Portable Air Compressor.
$3,450.00
5 HP Electric Powered Portable Air Compressor. This air compressor produces 15.4 CFM @ 175 PSI. The 17 gallon tank provides air storage suitable for a single technician and Hurricane tools. Electric motor requires 220 volt Single Phase electricity.

Add to cart
Add to cart

CMP003 – 14 HP Kohler Powered Truck-Mount Air Compressor.
$3,696.00
14 HP Kohler Powered Truck-Mount Air Compressor. This air compressor produces 18 CFM @ 175 PSI. The CMP003 pump utilizes a pneumatic pilot unloader valve that operates and controls the engine. The CMP003 utilizes a belt-guard mounted after-cooler that helps to bring system air near ambient temperatures, to help prolong the life of valves, and encourage the separation of water vapor to settle in the tank rather than expel through cleaning nozzles. The 30 gallon tank provides air storage suitable for a up to two technicians using Hurricane tools. The CMP003 is equipped with electric start (not shown in picture) and ready with recoil start if battery start fails.

Add to cart
Add to cart

CMP004 – 14 HP Kohler Powered Truck-Mount Air Compressor
$4,496.00
14 HP Kohler Powered Truck-Mount Air Compressor. This air compressor produces 24 CFM @ 175 PSI. The CMP004 pump utilizes Head-Unloading valves that operate more efficiently, and reduce wear on plumbing fittings in the airstream. The CMP004 utilizes a belt-guard mounted after-cooler that helps to bring system air near ambient temperatures, to help prolong the life of valves, and encourage the separation of water vapor to settle in the tank rather than expel through cleaning nozzles. The 30 gallon tank provides air storage suitable for a up to two technicians using Hurricane tools. The CMP004 is equipped with electric start (not shown in picture) and ready with recoil start if battery start fails.

Add to cart
Out of stock

Read more

CMP005 – Champion Truck Mount Air Compressor
$8,200.00
Champion Truck Mount Air Compressor. The Champion Truck Mount Air Compressor is powered by a Honda Engine, is packaged with a 30 gallon tank, and is capable of tank pressures up to 250 PSI. For applications where cleaning tools require large volumes of air, extra tank pressure acts as a larger storage vessel to reduce the run time on smaller systems. Product is manufactured in and ships from Champion facility in Chicago, IL area, allow 7 days for package production. Use this air compressor for residential and commercial jobs for any cleaning application with compressed air whip systems like the Hurricane.

Read more
Add to cart

CMP006 – 14 HP Tankless Screw Air Compressor
$6,695.00
14 HP Tankless Screw Air Compressor. The CMP006 portable screw air compressor provides all the benefits of efficiency, constant air flow, low noise factor, and a reasonable price all into one compact unit. The CMP006 is built on a 3-wheel portable cart with a locking caster and push/pull handle. The CMP006 provides 30 CFM of constant airflow at 150 PSI, for compressed air performance that even the most taxing air duct cleaning crews need. The CMP006 is ideal for running compressed air tools from the Hurricane, 1/2″ Typhoon, Viper, Scorpion, and Dust-Devil product lines. The CMP006 can become even more productive with an in-line surge tank of 30-60 gallon to maintain higher line pressures and provide compressed tool performance for up to 3 users.

Add to cart
Add to cart

CMP006E – 7.5 HP, 230V, 3-Phase Tankless Screw Air Compressor
$7,200.00
7.5 HP, 230V, 3-Phase Tankless Screw Air Compressor. The CMP006E portable screw air compressor provides all the benefits of portability in a building, efficiency, constant air flow, low noise factor, and a reasonable price all into one compact unit. The CMP006E is built on a portable caster cart. The CMP006E provides 30 CFM of constant airflow at 150 PSI, for compressed air performance that even the most taxing air duct cleaning crews need. The CMP006E is ideal for running compressed air tools from the Hurricane, 1/2″ Typhoon, Viper, Scorpion, and Dust-Devil product lines. The CMP006E can become even more productive with an in-line surge tank of 30-60 gallons to maintain higher line pressures and provide compressed tool performance for up to 3 users. The CMP600E is also available mounted on a tank for semi-permanent installation, not shown in the picture.

Add to cart
Add to cart

CMP022 – 5-Stage Desiccant Air Dryer and Oil Separator.
$960.00
5-Stage Desiccant Air Dryer and Oil Separator. This oil separator is an important add-on piece of equipment for your Duct Cleaning or Dryer Vent Cleaning operation. Remove the moisture and vaporized oils from the air stream to prevent freezing air lines in cold weather, recontaminating clean ducts, and spraying moisture into areas that are water sensitive. Desiccant Dryer comes with simple L-Brackets for mounting. 40 micron water removing filter with 9 oz. bowl, sight glass, and overnight drain; .01 micron oil removing filter with 9 oz. bowl, sight glass, and overnight drain; 1 gallon desiccant filter to remove all water; Filter/Regulator with 3 micron filter, 9 oz. bowl, and sight glass to protect the regulator from any desiccant dust, and regulator gauge; Unit comes with ball valve and 1 gallon of desiccant beads.

Add to cart
Add to cart

CMP023 – Desiccant Refill Material, 1 Gallon Container.
$67.00
Desiccant Refill Material, (4) 1 Gallon Containers. This desiccant changes color as it absorbs water, making it easy to know when a change is necessary. Blue = Dry, Pink = Wet. Reuse this desiccant after baking the moisture out in an oven. Use this refill material with the 5-Stage Desiccant Dryer, CMP022.

Add to cart
Add to cart

DPL001 – 1″ diameter duct plugs.
$85.00
1″ diameter duct plugs. These hard plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit flush on flat surfaces and are not compatible with round duct work. 500 per package. *** THIS PRODUCT MAY DELIVER AS A SPECIAL ORDER, EXPECT A LEAD TIME OF 5-7 DAYS *** EXPEDITED SHIPPING WILL NOT BE HONORED FOR THIS ITEM.

Add to cart
Add to cart

DPL002 – 2-1/2″ diameter duct plugs.
$48.00
2-1/2″ diameter duct plugs. These soft plastic duct plugs fit inside a 2-1/2″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 16″ or larger. 100 per package.

Add to cart
Add to cart

DPL003 – 1″ diameter duct plugs.
$32.00
1″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 500 per package.

Add to cart
Add to cart

DPL005 – 1″ diameter duct plugs.
$135.00
1″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 3,000 per package.

Add to cart
Add to cart

DSR001 – Oxine AD -12 Pack
$250.00
Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 12 vials to a case, each vial mixes into 1 Gallon of usable solution.Download MSDS

Add to cart
Add to cart

DSR002 – Oxine AD 16 oz. – 6 Pack
$340.00
Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 16 oz. bottle concentrate mixes into 5 gallons of usable solution. 6 bottles to a case.Download MSDS

Add to cart
Add to cart

DSR003 – Envirocon Spray Bottles.
$135.00
Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS

Add to cart
Add to cart

DSR004 – Envirocon Spray Bottles.
$135.00
Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS

Add to cart
Add to cart

DSR005 – Envirocon 5-Gallon Jug.* SHIPPING DISCLAIMER 4.1 APPLIES
$135.00
Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored. * SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS

Add to cart
Add to cart

DSR006 – Envirocon 5-Gallon Jug. * SHIPPING DISCLAIMER 4.1 APPLIES
$135.00
Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored.* SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS

Add to cart
Add to cart

DSR010 – Decon7 HVAC Disinfectant
$54.00
DECON 7 HVAC DISINFECTANT
– 3 PART D7 EVAPORATOR COIL AND HVAC DISINFECTING KIT
– 1 QUART

Add to cart
Add to cart

DSR105 – BBJ FreshDuct 14 oz.
$17.50
BBJ FreshDuct 14 oz. Aerosol Deodorizer. FreshDuct contains BBJ EnviroGard™, an encapsulation control agent that controls odors by both encapsulating and breaking down odor molecules, while time releasing a fresh fragrance. BBJ FreshDuct Odor Eliminator leaves the air fresh and clean. Our duct cleaning products are formulated with non-toxic and readily biodegradable ingredients meaning there is no need to evacuate the premises during application. Download MSDS

Add to cart
Add to cart

DSR106 – BBJ FreshDuct Deodorizer Concentrate.
$52.00
BBJ FreshDuct Deodorizer Concentrate. FreshDuct contains BBJ EnviroGard™, an encapsulation control agent that controls odors by both encapsulating and breaking down odor molecules, while time releasing a fresh fragrance. BBJ FreshDuct Odor Eliminator leaves the air fresh and clean. Our duct cleaning products are formulated with non-toxic and readily biodegradable ingredients meaning there is no need to evacuate the premises during application. This container can mix up to 5 gallons of RTU deodorizer. Download MSDS

Add to cart
Add to cart

DSR111 – Mini Split First Aid Kit
$24.00
The Mini Split First Aid Kit includes aerosol versions of our popular Micro Coil Clean and BBJ Mold Control for HVAC Systems and Air Duct products. This duo provides the muscle you need for a mini split cleaning job.

Add to cart
Add to cart

DSR112 – Mini Split Bib Kit
$123.00
The Mini-Split Bib Kit is the fastest way to clean ductless mini-split coils, blower wheels and more. If you are a contractor, you simply have to have one, or two, in your truck. This kit allows you to safely and quickly clean virtually any mini-split system the correct way using pressurized water on coils, blower wheels and more. The patented technology keeps water away from walls and other surroundings and directs it into the 5 gallon bucket for disposal, so it’s clean and safe all around.

Add to cart
Add to cart

DSR113 – Mini Split Replacement Bib Bag
$39.00
The Mini-Split Bib Kit replacement bib is made from high grade 4 mil plastic that has been sonically welded to provide strong seams and high-performance time after time.

Add to cart
Add to cart

DSR121 – BBJ Power Coil Clean.
$21.00
BBJ Power Coil Clean. Power Coil Clean, with its special pH balanced patented formula, removes the most stubborn soils and deposits from cooling coils. It effectively cleans and deodorizes evaporator coils, heating coils, condenser coils, window units, air filters, blowers, and other dirty HVAC components. With its special fast, penetrating action Power Coil Clean gets to hard to reach places by cutting through the toughest dirt, grease, and grime. Power Coil Clean includes patented Enviro-Gard that protects coils while cleaning. Keeping HVAC coils clean is part of any standard HVAC maintenance program and BBJ POWER COIL CLEAN™ with Enviro-Gard is a fast and safe evaporator pH Neutral coil cleaner that cleans and protects coils during cleaning. It quickly cleans cooling coils that trap dust, soil, grime and other troublesome deposits that reduce the heat transfer efficiency of HVAC units. Download MSDS

Add to cart
Add to cart

DSR122 – BBJ Micro-Coil Clean, 1/2 Gallon Concentrate
$39.00
BBJ Micro Coil Clean is a biodegradable coil cleaning solution that is mild for the user and harmless to expensive HVAC/R equipment and the environment. It will remove built-up dirt and grime from coils resulting in improved system efficiency, reduced power consumption, and increased system life. It effectively cleans and deodorizes evaporator coils, heating coils, condenser coils, window units, air filters, blowers, and other dirty HVAC/R components. Concentrate mixes down to 10 gallons of product. Download MSDS

Add to cart
Add to cart

DSR124 – Coil-Shot Tablets
$38.00
The revolutionary CoilShot cleaning system is designed to offer fast and easy cleaning of residential and light commercial single-pass HVAC coils without the strain and bulkiness of using liquid coil cleaners.

Add to cart
Read more

DSR131 – BBJ Mold Control Aerosol

BBJ Mold Control for HVAC Systems and Air Ducts, control and inhibit the growth of microorganisms – such as gram positive and gram negative bacteria, algae, and mold – in HVAC Systems and Air Ducts. This product is RTU (Ready-To-Use) in a 14 fl. oz. aerosol can; use this product in lieu of BBJ Maintain C-1 Concentrate. Download MSDS

Read more
Add to cart

DSR132 – BBJ Mold Control
$163.00
BBJ Mold Control for HVAC Systems and Air Ducts, control and inhibit the growth of microorganisms – such as gram positive and gram negative bacteria, algae, and mold – in HVAC Systems and Air Ducts. Concentrate mixes down to 7.5 gallons of product. Download MSDS

Add to cart