-
STC108 – 8″ Snap Adaptor.
$140.008″ Snap Adaptor. The 8″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 8″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 8″ Snap Adaptor to steel duct work.
-
DSR006 – Envirocon 5-Gallon Jug. * SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored.* SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
DSR005 – Envirocon 5-Gallon Jug.* SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored. * SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
DSR003 – Envirocon Spray Bottles.
$135.00Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS
-
DPL005 – 1″ diameter duct plugs.
$135.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 3,000 per package.
-
ZBG003 – 36″ diameter zone bag.
$133.0036″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
PAT012 – 12″ x 12″ Cross-Broken Sheet metal duct patch, 25 pack
$131.3212″ x 12″ Cross-Broken Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal with a cross-break for extra strength, and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 10″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. *** Please allow up to 7 days processing for this order. Expedited shipping methods will be honored when the inventory is available, not when the order is purchased.
-
IAQ004 – NADCA Vacuum Test Calibration Meter
$129.00NADCA Vacuum Test Pump Calibration Meter. Use this calibration device before every NADCA Vacuum Test sample is taken. Connect a sampling cassette to the pump tubing, and connect the calibration device to the ‘SAMPLE’ side of the cassette. Adjust the flow control on the pump to the desire flow level. After calibration, connect a clean sampling cassette and proceed with NADCA Vacuum Test.
-
PAT011 – 10-1/2″ x 10-1/2″ Cross-Broken Sheet metal duct patch, 25 pack
$127.6310-1/2″ x 10-1/2″ Cross-Broken Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal with a cross-break for extra strength, and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 8″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. *** Please allow up to 7 days processing for this order. Expedited shipping methods will be honored when the inventory is available, not when the order is purchased.
-
DSR112 – Mini Split Bib Kit
$123.00The Mini-Split Bib Kit is the fastest way to clean ductless mini-split coils, blower wheels and more. If you are a contractor, you simply have to have one, or two, in your truck. This kit allows you to safely and quickly clean virtually any mini-split system the correct way using pressurized water on coils, blower wheels and more. The patented technology keeps water away from walls and other surroundings and directs it into the 5 gallon bucket for disposal, so it’s clean and safe all around.
-
GBD003 – Case of 10 Disposable Filter Bags.
$120.00Case of 10 Disposable Filter Bags. 4′ diameter x 6′ length. Disposable bag is made of throw-away breathable material. Bag volume is 75 cubic feet. Excellent filtration for removal of cellulose, fiberglass, rock-wool, vermiculite and other insulation materials.
-
CAS149 – 30′ Hurricane Line.
$120.0030′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.
-
CAS159 – 3/8″ dia. x 100′ Compressed Air Hose.
$119.003/8″ dia. x 125′ Compressed Air Hose. This Goodyear Compressed Air Hose is rated for 300 PSI and comes with standard 1/4″ airline fittings. On the male connector side, this hose has a strain relief to extend the life of the hose at the connection site.
-
HDV003 – 3″ x 50′ Vaculite Vacuum Hose.
$112.003″ x 50′ Vaculite Vacuum Hose. 3″ Vaculite Vacuum Hose is all plastic with an exterior helix and semi-smooth bore. 3″ Vaculite Hose is ideal for insulation blowing applications. The semi-smooth bore of the hose helps to further condition material as it tumbles through the hose.
-
PAT016 – 16″ x 16″ Sheet metal duct patch, 25 pack.
$108.1616″ x 16″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 12″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
PAT001 – 10-1/2″ x 10-1/2″ Folded Edge Sheet metal duct patch, 25 pack.
$104.7410-1/2″ x 10-1/2″ Folded Edge Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle. Perfect for covering 8″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. *** Please allow up to 7 days processing for this order. Expedited shipping methods will be honored when the inventory is available, not when the order is purchased.
-
HDV002 – 2-1/2″ x 50′ Vaculite Vacuum Hose.
$104.002-1/2″ x 50′ Vaculite Vacuum Hose. 2-1/2″ Vaculite Vacuum Hose is all plastic with an exterior helix and semi-smooth bore. 2-1/2″ Vaculite Hose is ideal for insulation blowing applications. The semi-smooth bore of the hose helps to further condition material as it tumbles through the hose.
-
ZBG002 – 26″ diameter zone bag.
$103.0026″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
FOG016 – Coil-Shot Sprayer Gun
$103.00The CoilShot® condenser cleaner tool and tablet system make cleaning condenser coils faster and easier than ever before. The unit connects directly to a garden hose and uses a single pre-measured tablet to apply foaming coil cleaner directly to coils. For added cleaning performance, use it with the optional 3ft wand. The innovative technology quickly cleans coils of dirt, grime, and even grease*! Eliminate the need for lugging around and measuring heavy, bulky liquid coil cleaners.
-
CAS148 – 20′ Hurricane Line.
$103.0020′ Hurricane Line. The Hurricane is the favorite compressed air cleaning system of duct cleaners nation-wide. The Hurricane provides a flexible, one-piece hose, that is lined with steel tape to provide the precise amount of rigidity to push down long runs without trouble.
-
STC012 – 12″ Tapered Starter Collar.
$98.0012″ Tapered Starter Collar. The 12″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 12″ Tapered Starter Collar to steel duct work.
-
GEN007 – Dust Collection Bucket and Clamp
$98.00Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.
-
RDC108 – 10″ x 8″ Steel Hose Reducer.
$97.0010″ x 8″ Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 10″ diameter hose to ONE 8″ diameter hose.
-
RDC164 – 6″ x 4″ Steel Inlet Reducer.
$95.006″ x 4″ Steel Inlet Reducer. Steel Inlet Reducers make connecting a smaller hose to your vacuum fast and easy. Convert a 6″ Inlet into a 4″ Inlet. Inlet reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss red powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to reducer. This reducer connects to a 6″ diameter Vacuum Inlet to ONE 4″ diameter hose.
-
CAS141 – Heavy-Duty Hurricane Dryer Vent Line.
$93.00Heavy-Duty Hurricane Dryer Vent Line. The Heavy-Duty Hurricane Dryer Vent Line is a 30′ flexible tubing with a high velocity reverse bullet. The Heavy-Duty Dryer Vent Line requires a Dryer Vent Line Trigger (CAS130) or Hurricane Line (CAS148/CAS149) for operation. The Heavy-Duty Dryer Vent Line propels itself through duct work, breaking clogs and blowing loose material back through the opening. Heavy-Duty Line is designed for extreme heat conditions. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.
-
AGR653-30 – 30″ Corner Button-Lock Brush
$93.0030″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods. This brush should be used with a Heavy-Duty Cable ONLY, AGR613-AGR615.
-
ZBG001 – 18″ diameter zone bag.
$88.0018″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
STC010 – 10″ Tapered Starter Collar.
$88.0010″ Tapered Starter Collar. The 10″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 10″ Tapered Starter Collar to steel duct work.
-
DVB105 – Plug-In SmartPhone Vane Anemometer
$88.00Plug-In SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB105 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB105 shows airflow in FPM, CFM, CMH, MPS. Send onsite professional reports from you SmartPhone or Device by email. The DVB105 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to SMART devices via 1/8″ mini-plug.
-
CAS179 – Reverse Spinning Duct Ball with 25′ Lead.
$88.00Reverse Spinning Duct Ball with 25′ Lead. The Reverse Spinning Duct Ball with 25′ Lead is a versatile tool for both Air Duct Cleaning and Dryer Vent Cleaning. The Reverse Spinning Duct Ball creates a vortex of high velocity air that easily cleans ducts that are contaminated with dirt, dust, and lint. The Reverse Spinning Duct Ball is compatible with the Hurricane System. Spinning Duct Ball components are designed for intermittent use. Use a Hurricane Trigger Valve (CAS130) or compatible to interface this item with 1/4″ standard interchange airline fittings.
