-
RDC086 – 8″ x 6″ Steel Hose Reducer.
$72.008″ x 6″ Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 8″ diameter hose to ONE 6″ diameter hose.
-
RDC102 – 8″ x 8″ x 10″ Y-Hose Splitter.
$254.008″ x 8″ x 10″ Y-Hose Splitter. Adapt your vacuum hose run from ONE 10″ diameter hose to TWO 8″ diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10″ diameter hose to TWO 8″ diameter hoses. Other sizes are available on Special Order.
-
RDC108 – 10″ x 8″ Steel Hose Reducer.
$97.0010″ x 8″ Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 10″ diameter hose to ONE 8″ diameter hose.
-
RDC164 – 6″ x 4″ Steel Inlet Reducer.
$95.006″ x 4″ Steel Inlet Reducer. Steel Inlet Reducers make connecting a smaller hose to your vacuum fast and easy. Convert a 6″ Inlet into a 4″ Inlet. Inlet reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss red powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to reducer. This reducer connects to a 6″ diameter Vacuum Inlet to ONE 4″ diameter hose.
-
SCR850 – Sheet Metal Zip Screws.
$10.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 500 per package.
-
SCR851 – Sheet Metal Zip Screws.
$245.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 15,000 per package.
-
SLV003 – 3″ Diameter Hose Sleeve.
$19.003″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 3″ hose.
-
SLV004 – 4″ Diameter Hose Sleeve.
$19.004″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 4″ hose.
-
SLV006 – 6″ Diameter Hose Sleeve.
$26.006″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 6″ hose.
-
SLV008 – 8″ Diameter Hose Sleeve.
$33.008″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 8″ hose.
-
SLV010 – 10″ Diameter Hose Sleeve.
$37.0010″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 10″ hose.
-
SLV012 – 12″ Diameter Hose Sleeve.
$42.0012″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 12″ hose.
-
STC006 – 6″ Tapered Starter Collar.
$78.006″ Tapered Starter Collar. The 6″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 6″ Tapered Starter Collar to steel duct work.
-
STC008 – 8″ Tapered Starter Collar.
$83.008″ Tapered Starter Collar. The 8″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 8″ Tapered Starter Collar to steel duct work.
-
STC010 – 10″ Tapered Starter Collar.
$88.0010″ Tapered Starter Collar. The 10″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 10″ Tapered Starter Collar to steel duct work.
-
STC012 – 12″ Tapered Starter Collar.
$98.0012″ Tapered Starter Collar. The 12″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 12″ Tapered Starter Collar to steel duct work.
-
STC108 – 8″ Snap Adaptor.
$140.008″ Snap Adaptor. The 8″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 8″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 8″ Snap Adaptor to steel duct work.
-
STC110 – 10″ Snap Adaptor.
$145.0010″ Snap Adaptor. The 10″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 10″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 10″ Snap Adaptor to steel duct work.
-
STC112 – 12″ Snap Adaptor.
$150.0012″ Snap Adaptor. The 12″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 12″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 12″ Snap Adaptor to steel duct work.
-
STC206 – 6″ Floor Vent Hose Adaptor
$181.006″ Floor Vent Hose Adaptor. Use the 6″ Floor Vent Hose Adaptor in unconventional air duct cleaning system hook-ups. Down-Flow furnaces that run duct work through slab are hard to get to, but the 6″ Floor Vent Hose Adaptor solves the problem. 1″ access holes make for easy insertion of cleaning tools.
-
STC208 – 8″ Floor Vent Hose Adaptor
$181.008″ Floor Vent Hose Adaptor. Use the 8″ Floor Vent Hose Adaptor in unconventional air duct cleaning system hook-ups. Down-Flow furnaces that run duct work through slab are hard to get to, but the 8″ Floor Vent Hose Adaptor solves the problem. 1″ access holes make for easy insertion of cleaning tools.
-
STC304 – 4″ Dryer Vent Cleaning Vacuum Hose Adaptor
$87.004″ Dryer Vent Cleaning Vacuum Hose Adaptor. Cleaning residential dryer vents without a collection device can be messy. Use the STC304 to connect a 2″ (1.90″ ID) vacuum hose for collecting lint as you free it from the dirty duct. The STC304 slides into a standard 4″ residential dryer duct and snugly fits because of its tapered design. The 1″ access hole allows tools to be run through the duct for thorough cleaning with compressed air tools or brushes. The vacuum hose connection on the STC304 is a perfect fit for the VAC300 HEPA Filtered Bucket Vac.
