Showing 61–90 of 95 results
Filter by Tool/Supply Type
- Access Door (44)
- Contact Vacuum (1)
- Duct Plugs (4)
- Fuel Storage (7)
- Hand Tool (11)
- Power Tool (5)
- Screws (2)
- Tape / Rolled Sealant (8)
- Test & Measure (2)
- Zoning (8)
Filter by Application
- Commercial (94)
- Dryer Vent (30)
- Industrial (92)
- Insulation Removal (5)
- Residential (79)
Filter by Size
Filter by Access Door Type
- Cam-Lock (18)
- Cross Broke (2)
- Dove-Tail (18)
- Flat (5)
- Folded Edge (1)
- Hinged (18)
- Pressure Sensitive Adhesive (18)
Filter by Prices
-
PAT223-14 – Hinged-PSA Access Door,14″x14″
$37.00Hinged Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-16 – Hinged-PSA Access Door,16″x16″
$17.00Hinged Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-18 – Hinged-PSA Access Door,18″x18″
$60.00Hinged Access Door for Sheet Metal Duct Work. 18″ x 18″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-20 – Hinged-PSA Access Door,20″x20″
$73.00Hinged Access Door for Sheet Metal Duct Work. 20″ x 20″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT223-24 – Hinged-PSA Access Door,24″x24″
$83.00Hinged Access Door for Sheet Metal Duct Work. 24″ x 24″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-06 – Cammed-PSA Access Door,6″x6″
$24.00Cammed Access Door for Sheet Metal Duct Work. 6″ x 6″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-08 – Cammed-PSA Access Door,8″x8″
$26.00Cammed Access Door for Sheet Metal Duct Work. 8″ x 8″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-10 – Cammed-PSA Access Door,10″x10″
$29.00Cammed Access Door for Sheet Metal Duct Work. 10″ x 10″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-12 – Cammed-PSA Access Door,12″x12″
$29.00Cammed Access Door for Sheet Metal Duct Work. 12″ x 12″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-14 – Cammed-PSA Access Door,14″x14″
$37.00Cammed Access Door for Sheet Metal Duct Work. 14″ x 14″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-16 – Cammed-PSA Access Door,16″x16″
$47.00Cammed Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-18 – Cammed-PSA Access Door,18″x18″
$60.00Cammed Access Door for Sheet Metal Duct Work. 18″ x 18″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-20 – Cammed-PSA Access Door,20″x20″
$73.00Cammed Access Door for Sheet Metal Duct Work. 20″ x 20″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-24 – Cammed-PSA Access Door,24″x24″
$83.00Cammed Access Door for Sheet Metal Duct Work. 24″ x 24″ Hinged Door is Secured with 4 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
SCR850 – Sheet Metal Zip Screws.
$10.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 500 per package.
-
SCR851 – Sheet Metal Zip Screws.
$245.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 15,000 per package.
-
SDR001 – Lenox 1″ Uni-Bit Step Drill.
$54.00Lenox 1″ Uni-Bit Step Drill. This high quality drill bit cuts through sheet metal in seconds to create holes from 3/8″ – 1″ diameter. Fits in any drill with 3/8″ or larger chuck.
-
TAP001 – Aluminum Foil Duct Tape.
$25.00Aluminum Foil Duct Tape. 2-1/2″ x 60 Yards. U/L 181A-P Listed. Perfect for sealing duct work openings, to the NADCA Standard, ACR2013.
-
-
TAP005 – Vent / Grill Mask Tape.
$28.00Vent / Grill Mask Tape. 8″ x 200′ with 4″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
TAP006 – 24″ Vent / Grill Mask Tape.
$82.00Vent / Grill Mask Tape. 24″ x 200′ with 12″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
TAP010 – Travel-Tack – Low VOC installation adhesive, 12 ounce can
$14.00Travel-Tack is a self-contained, instant-tacking portable spray system engineered to deliver a low-pressure web spray that eliminates adhesive vaporization and over-spray. Its portability, limited equipment clean-up and low equipment cost make this adhesive ideal for shop or field use. Travel-Tack passes ASTM C916, SCAQMD Rule #1168, and has the City of Los Angeles Approval RR #8069.
-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
TAP013 – Foil Grip 1403 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Rated 4.00 out of 5Foil-Grip 1403-181BFX is a UL 181B-FX listed pressure sensitive, 40-year cycle, duct joint and general purpose rolled sealant. Foil-Grip 1403-181BFX provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1403-181BFX is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.
-
TAP014 – Foil Grip 1404 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1404-181-BFX is a UL 181B-FX listed pressures sensitive rolled mastic sealant. The Foil-Grip 1404-181-BFX has superior tack for instant grab strength to galvanized metal, flex duct, PVC coated pipe, and PVC coated ductwork for an immediate airtight bond. The foil facer/butyl adhesive composite provides excellent UV resistance coupled with outstanding water resistance. The easy tear provides a fast installation for airtight seals on above and below grade ductwork applications.
-
TAP015 – Aluma Grip AFT-701 – Indoor/outdoor rolled mastic sealant – 4″ x 50′ roll
$45.00Aluma-Grip AFT-701 is a heavy-duty, pressure-sensitive, 40-year-cycle, duct joint rolled sealant. AFT-701 provides an aggressive water-resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC-coated duct, and duct wrap vapor barriers. AFT-701 is also suitable for sub-grade application on PVC-coated duct. Eligible for a 5-year stand-alone warranty and a 10-year warranty when used in the Foil-Sealant Sealing System.
-
VAC302 – 5-Gallon Bucket, Red.
$11.005-Gallon Bucket, Red. The Meyer Machine Bucket is handy for use as a tool bucket, slop sink, washing registers, and use on the HEPA Filtered Bucket Vac, VAC300. Carry extra 5-Gallon buckets on your truck for the unknown dirty job that requires haul-out.
-
VAC304 – 5-Gallon Bucket Lid with Pour Spout
$8.005-Gallon Bucket Lid with Pour Spout. Use this lid with MME Bucket, VAC302, to seal contamination in bucket after using the bucket vac, or for mixing down chemical concentrates to 5-Gallon quantities.
-
ZBG001 – 18″ diameter zone bag.
$88.0018″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.