Showing 1–15 of 95 results
Filter by Tool/Supply Type
- Access Door (44)
- Contact Vacuum (1)
- Duct Plugs (4)
- Fuel Storage (7)
- Hand Tool (11)
- Power Tool (5)
- Screws (2)
- Tape / Rolled Sealant (8)
- Test & Measure (2)
- Zoning (8)
Filter by Application
- Commercial (94)
- Dryer Vent (30)
- Industrial (92)
- Insulation Removal (5)
- Residential (79)
Filter by Size
Filter by Access Door Type
- Cam-Lock (18)
- Cross Broke (2)
- Dove-Tail (18)
- Flat (5)
- Folded Edge (1)
- Hinged (18)
- Pressure Sensitive Adhesive (18)
Filter by Prices
-
-
VAC304 – 5-Gallon Bucket Lid with Pour Spout
$8.005-Gallon Bucket Lid with Pour Spout. Use this lid with MME Bucket, VAC302, to seal contamination in bucket after using the bucket vac, or for mixing down chemical concentrates to 5-Gallon quantities.
-
SCR850 – Sheet Metal Zip Screws.
$10.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 500 per package.
-
ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
$10.00ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
-
VAC302 – 5-Gallon Bucket, Red.
$11.005-Gallon Bucket, Red. The Meyer Machine Bucket is handy for use as a tool bucket, slop sink, washing registers, and use on the HEPA Filtered Bucket Vac, VAC300. Carry extra 5-Gallon buckets on your truck for the unknown dirty job that requires haul-out.
-
HCT024 – Lenox/Hilmor 6-in-1 Stubby Multi-Driver
$13.00Lenox/Hilmor 6-in-1 Stubby Multi-Driver. Professional quality hand tools are a must on the job site. This 6-in-1 driver tools puts some of the most common driver bits at your finger tips in a STUBBY Style driver.
-
TAP010 – Travel-Tack – Low VOC installation adhesive, 12 ounce can
$14.00Travel-Tack is a self-contained, instant-tacking portable spray system engineered to deliver a low-pressure web spray that eliminates adhesive vaporization and over-spray. Its portability, limited equipment clean-up and low equipment cost make this adhesive ideal for shop or field use. Travel-Tack passes ASTM C916, SCAQMD Rule #1168, and has the City of Los Angeles Approval RR #8069.
-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
HCT002 – Replacement cutting bit for Adjustable Hole Cutter.
$15.00Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
-
HSW001 – 1″ Lenox Bi-Metal Hole Saw.
$16.001″ Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 1″ holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8″ or larger chuck.
-
PAT223-16 – Hinged-PSA Access Door,16″x16″
$17.00Hinged Access Door for Sheet Metal Duct Work. 16″ x 16″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
PAT221-06 – Hinged-DT Access Door, 6″x6″
$21.00Hinged Access Door for Sheet Metal Duct Work. 6″ x 6″ Hinged Door is Secured with One Cam-Lock. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT222-06 – Cammed-DT Access Door, 6″x6″
$21.00Cammed Access Door for Sheet Metal Duct Work. 6″ x 6″ Cammed Door is Secured with 2 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.