-
DSR214 – Hardcast Versa-Grip 181 Indoor/Outdoor Fiber Reinforced White. 1 Gallon.
$28.00Hardcast Versa-Grip 181 Indoor/Outdoor Fiber Free White. 1 Gallon. Versa-Grip 181 is a premium grade, versatile all purpose, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Versa-Grip incorporates a built-in fiber reinforcement for exceptional strength, with UV inhibitors for outdoor use. 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
DSR215 – Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon
$27.00Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon. Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible to save call-back labor. Flex-Grip 550’s excellent coverage rates and easy brush-on application provide low installed cost. • UL 181 B-M Listed • Passes ASTM C-731, ASTM D-2202 • USDA, EPA and FDA Approved • LEED compliant • SCAQMD Rule 1168 • City of Los Angeles Approval RR #8069
-
DSR216 – Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon.
$20.00Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon. Duct-Seal 321 in an all purpose industrial grade duct sealant for all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. It includes UV inhibitors for extended outdoor exposure and built-in fiber reinforcement for added strength. This non-toxic water based product is solvent free and is suitable for residential use. -Duct-Seal 321 is UL 181 B-M Listed -Passes ASTM D-2202, ASTM C-731. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. -City of Los Angeles Approval RR #8069
-
DSR221 – RE-500 Interior Coating/Insulation Encapsulant – White
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR222 – RE-500 Interior Coating/Insulation Encapsulant – Black
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR231 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – White
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR232 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – Black
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR241 – Pan-Grip Burst Bag
$46.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR242 – Pan-Grip Cartridge
$48.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR243 – Pan-Grip 1 gallon kit
$293.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR244 – Pan-Grip Flex 2 gallon kit
$824.00Pan-Grip Flex is a multicomponent novolac based elastomeric epoxy product that is ideal for residential, commercial and industrial applications requiring high elongation in typical environments. It is able to withstand moisture, manage temperature changes, and adjust from freeze to thaw. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The elastomeric properties of Pan-Grip Flex make the product ideal for surfaces where slight movement is expected (i.e. AHU floor, etc.). The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer.
-
DVB105 – Plug-In SmartPhone Vane Anemometer
$88.00Plug-In SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB105 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB105 shows airflow in FPM, CFM, CMH, MPS. Send onsite professional reports from you SmartPhone or Device by email. The DVB105 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to SMART devices via 1/8″ mini-plug.
-
DVB106 – Wireless SmartPhone Vane Anemometer
$140.00Wireless/Bluetooth SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB106 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB106 shows airflow in FPM, CFM, CMH, MPS. Use DVB106 to also measure Temperature, Humidity and Air Pressure. Send onsite professional reports from your SmartPhone or Device by email. The DVB106 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to Smart Devices VIA Bluetooth.
-
ENG142 – 5 Gallon SureCan Gas Can
$55.00ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
ENG143 – 2.2 Gallon SureCan Gas Can
$45.00ENG143 – 2.2 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
-
ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG144 – SureCan 5 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
$10.00ENG145 – SureCan 2.2 Gallon Replacement Spout & Fill Cap w/Tether
-
ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
$10.00ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
-
ENG147 – SureCan Replacement Spout Assembly (2.2 Gal & 5 Gal)
$10.00ENG147 – SureCan Replacement Spout Assembly (2.2 Gal & 5 Gal)
-
FOG020 – The Squall
$232.00The Squall Cold Mist Fogger Attachment. The Squall is a remote venturi air/liquid mixing nozzle, specifically designed for use in air ducts and on HVAC equipment. The design allows for a cleaning technician to attach it to standard compressed air duct cleaning extension lines like the Hurricane. Using compressed air its power source, the treatment liquid is drawn through the liquid line to the mixing nozzle where it is then sprayed out in a micro-drop mist. By leveraging the use of existing compressed air extension lines, the Squall cold mist fog can be applied from within the duct, providing consistent product application as the nozzle is retracted back toward the technician. Additionally, The Squall can be used for directed or general broadcast cold mist fog outside of an air duct. Download Fogging Catalog Page.
-
GEN007 – Dust Collection Bucket and Clamp
$98.00Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.
-
GEN200 – 20 HP General Power Vacuum.
$5,200.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/General.pdf" title="General.PDF Download"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_GENERAL.pdf"]
20 HP General Power Vacuum. The General is All the Vacuum You’ll Need for Duct Cleaning. Kohler Command Engine, 5,250 CFM, Portable 4-Wheel Cart.
If your Air Duct Cleaning Crew needs a vacuum collector with Serious Suction… Look No Further. The General delivers ‘Duct-Truck’ like performance at a fraction of the price and without being tied to the curb.
The General is the vacuum/collector you need for a powerful start in the air duct cleaning business. The General has the versatility to tackle residential, light commercial, and indsutrial application cleaning projects.
The General is a high powered Gas Portable Air Duct Cleaning Vacuum that features a portable four-wheeled cart for placement at the job-site in the most opportunistic spot. On many residential air duct cleaning projects, the General can be connected to the air duct system with 50′-75′ of vacuum hose, allowing for maximum airflow by the vacuum.
Excessive hose runs, and long setup times are a thing of the past when your cleaning crew operates The General. With average hose runs between 50′-75′, setup times for a two-man crew can be limited to 10 minutes; storing truck-loads of bulky hose for residential cleaning projects can be a problem of the past.
The material handling fan-wheel on The General, allows for constant airflow of 5,250 CFM through the entire cleaning process. Dirty filters in the airstream are a non-issue with The General. An oversize cloth filter bag acts as the filter device, and a large cannister collects removed debris for disposal.
As air duct cleaning projects increase in size, airflow should in turn also increase. The coupling of two General power vacuums together is an effective, low cost method for increasing airflow on projects that demand it. In light commercial and industrial applications, The General is capable of pulling through hose-runs up to 250′ in length. The General is also available with Alternate Fuel/Power Options including LP-GAS and Electric Motor. For industrial applications that allow the combustion of LP-GAS engines indoors, bring The General indoors to reduce hose runs and increase airflow. Filtration cabinets are available for LP-GAS and Electric Powered vacuum arrangements that can provide CLASS 100, HEPA filtered air.
The General Air Duct Cleaning system can be comfortably set-up in a box truck or enclosed trailer, sized 6′ x 12′ or larger. Complete cleaning packages are available for all applications including residential, light commercial, industrial, and other special arrangements. Plan your custom package with the sales team, or choose from the popular arrangments that include The General, a powerful air compressor, vacuum hose, compressed air cleaning whips, duct brushes, tools, and materials necessary to access and make proper closure to many types of ductwork.
-
GEN930 – OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums
$348.00OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums. The bolt-on fuel cell kit comes with drill templates for retro-fit on older vacuums, new vacuums are pre-drilled and ready for installation. The kit includes a 6-gallon Flambeau tank, a heavy duty frame, the required hoses, and all the necessary hardware. Installation of this kit removes the necessity of detatchable fuel cells and any quick-disconnect fittings. Add this item to your new vacuum purchase. Carbon cannister (GEN933) not included. For CARB compliancy add P/N: GEN933 to your order.
-
GEN933 – 400cc Carbon Cannister for CARB Compliancy on 6 Gallon Fuel Cell.
$78.00400cc Carbon Cannister for CARB Compliancy on 6 Gallon Fuel Cell. Add this 400cc carbon cannister to your General, Major, or Ranger vacuum and 6 gallon fuel cell for CARB comliancy.
-
HCT001 – 2″ – 12″ Hole Cutter.
$76.002″ – 12″ Hole Cutter. Cut a perfect circle in up to #20 gauge sheet metal with this tool. Connect your duct cleaning vacuum hose to a round hole with a Snap Adaptor for ideal airflow.
-
HCT002 – Replacement cutting bit for Adjustable Hole Cutter.
$15.00Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
-
HCT013 – Lenox/Hilmor Aviation Tin Snips, LEFT
$24.00Lenox/Hilmor Aviation Tin Snips, LEFT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT014 – Lenox/Hilmor Aviation Tin Snips, RIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, RIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT015 – Lenox/Hilmor Aviation Tin Snips, STRAIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, STRAIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT016 – Lenox/Hilmor 3-Blade Sheet Metal Crimper
$24.00Lenox/Hilmor 3-Blade Sheet Metal Crimper. Professional quality hand tools are a must on the job site. Never be without a set of crimpers when duct/pipe fitting is part of your job. Use the 3-Blade Crimpers to fit same-size sheet metal snap-lock pipe end to end with ease.
