-
DSR211 – RS-100 Interior Restoration Duct Sealant
$290.00RS-100 is a water-based spray sealant engineered to seal joints, penetrations and seams from inside of the HVAC ductwork. The superior physical properties of this non-tack sealant will meet and exceed the SMACNA pressure classes and its flexibility allows for system operation without cracking. RS-100 sealant is formulated with EPA registered chemicals to resist microbial growth on the surface of the sealant.
-
DSR212 – Hardcast Spray Seal, 5 Gal.
$220.00Hardcast Spray Seal, 5 Gal. Spray-Seal is an all-purpose high performance sprayable sealant for use on all types of metal duct, ?berglass duct board, duct fabric and ?ex duct. Distinguished by its ability to accommodate minor vibration and movement, Spray-Seal stays ?exible and will not crack. Spray-Seal decreases labor substantially and increases productivity while using less material. 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
DSR213 – Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. 1 Gallon
$40.00Hardcast Iron-Grip 601 Indoor/Outdoor Fiber Free Gray. Iron-Grip 601 is a versatile, all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Iron-Grip stays flexible to save call-back labor. Iron-Grip’s excellent coverage rates and easy brush-on application provide low installed cost. Iron-Grip 601 is UL 181 B-M Listed Passes ASTM C-731, ASTM D-2202. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. City of Los Angeles Approval RR #8069 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
DSR214 – Hardcast Versa-Grip 181 Indoor/Outdoor Fiber Reinforced White. 1 Gallon.
$28.00Hardcast Versa-Grip 181 Indoor/Outdoor Fiber Free White. 1 Gallon. Versa-Grip 181 is a premium grade, versatile all purpose, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Versa-Grip incorporates a built-in fiber reinforcement for exceptional strength, with UV inhibitors for outdoor use. 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
DSR215 – Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon
$27.00Hardcast Flex-Grip 550 Indoor/Outdoor Fiber Free White. 1 Gallon. Flex-Grip 550 is an all purpose, fiber-free, duct sealant for use on all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. Distinguished by its ability to accommodate minor vibration and movement, Flex-Grip 550 stays flexible to save call-back labor. Flex-Grip 550’s excellent coverage rates and easy brush-on application provide low installed cost. • UL 181 B-M Listed • Passes ASTM C-731, ASTM D-2202 • USDA, EPA and FDA Approved • LEED compliant • SCAQMD Rule 1168 • City of Los Angeles Approval RR #8069
-
DSR216 – Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon.
$20.00Hardcast Duct-Seal 321 Indoor/Outdoor Fiber Reinforced Gray. 1 Gallon. Duct-Seal 321 in an all purpose industrial grade duct sealant for all types of metal duct, glass fiber duct board, and flex duct, as well as duct fabric and flexible tubing runouts. It includes UV inhibitors for extended outdoor exposure and built-in fiber reinforcement for added strength. This non-toxic water based product is solvent free and is suitable for residential use. -Duct-Seal 321 is UL 181 B-M Listed -Passes ASTM D-2202, ASTM C-731. USDA, EPA and FDA Approved. LEED compliant SCAQMD Rule 1168. -City of Los Angeles Approval RR #8069
-
DSR221 – RE-500 Interior Coating/Insulation Encapsulant – White
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR222 – RE-500 Interior Coating/Insulation Encapsulant – Black
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR231 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – White
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR232 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – Black
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR241 – Pan-Grip Burst Bag
$46.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR242 – Pan-Grip Cartridge
$48.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR243 – Pan-Grip 1 gallon kit
$293.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR244 – Pan-Grip Flex 2 gallon kit
$824.00Pan-Grip Flex is a multicomponent novolac based elastomeric epoxy product that is ideal for residential, commercial and industrial applications requiring high elongation in typical environments. It is able to withstand moisture, manage temperature changes, and adjust from freeze to thaw. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The elastomeric properties of Pan-Grip Flex make the product ideal for surfaces where slight movement is expected (i.e. AHU floor, etc.). The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer.
-
TAP010 – Travel-Tack – Low VOC installation adhesive, 12 ounce can
$14.00Travel-Tack is a self-contained, instant-tacking portable spray system engineered to deliver a low-pressure web spray that eliminates adhesive vaporization and over-spray. Its portability, limited equipment clean-up and low equipment cost make this adhesive ideal for shop or field use. Travel-Tack passes ASTM C916, SCAQMD Rule #1168, and has the City of Los Angeles Approval RR #8069.
-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
TAP013 – Foil Grip 1403 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1403-181BFX is a UL 181B-FX listed pressure sensitive, 40-year cycle, duct joint and general purpose rolled sealant. Foil-Grip 1403-181BFX provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1403-181BFX is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.
-
TAP014 – Foil Grip 1404 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1404-181-BFX is a UL 181B-FX listed pressures sensitive rolled mastic sealant. The Foil-Grip 1404-181-BFX has superior tack for instant grab strength to galvanized metal, flex duct, PVC coated pipe, and PVC coated ductwork for an immediate airtight bond. The foil facer/butyl adhesive composite provides excellent UV resistance coupled with outstanding water resistance. The easy tear provides a fast installation for airtight seals on above and below grade ductwork applications.
-
TAP015 – Aluma Grip AFT-701 – Indoor/outdoor rolled mastic sealant – 4″ x 50′ roll
$45.00Aluma-Grip AFT-701 is a heavy-duty, pressure-sensitive, 40-year-cycle, duct joint rolled sealant. AFT-701 provides an aggressive water-resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC-coated duct, and duct wrap vapor barriers. AFT-701 is also suitable for sub-grade application on PVC-coated duct. Eligible for a 5-year stand-alone warranty and a 10-year warranty when used in the Foil-Sealant Sealing System.
