HVAC Air Duct Cleaning is a growing industry that serves markets from residential to heathcare, and everything in between. Increased concern regarding Indoor Air Quality (IAQ) is a driving force bringing to light the contaminants that are present in today’s buildings. The duct system is the building’s breathing structure, and can have higher concentrations of dirt, microbial growth, and other harmful substances than the floors of public restrooms.
Showing all 19 results
Filter by Tool/Supply Type
- Access Door (44)
- Contact Vacuum (7)
- Duct Plugs (4)
- Fuel Storage (8)
- Hand Tool (11)
- Power Tool (5)
- Screws (2)
- Tape / Rolled Sealant (8)
- Test & Measure (2)
- Zoning (8)
Filter by Hose Item Type
- Duct Hose Flange (9)
- Hose Reducer (3)
- Hose Splitter (1)
- Sleeve (6)
Filter by Application
- Commercial (172)
- Dryer Vent (62)
- Industrial (164)
- Insulation Blowing (18)
- Insulation Removal (28)
- Residential (160)
Surface Restoration Type
Filter by Size
Filter by Access Door Type
- Cam-Lock (18)
- Cross Broke (2)
- Dove-Tail (18)
- Flat (5)
- Folded Edge (1)
- Hinged (18)
- Pressure Sensitive Adhesive (18)
Filter by Brands
Filter by Prices
-
HCT013 – Lenox/Hilmor Aviation Tin Snips, LEFT
$24.00Lenox/Hilmor Aviation Tin Snips, LEFT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT014 – Lenox/Hilmor Aviation Tin Snips, RIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, RIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT015 – Lenox/Hilmor Aviation Tin Snips, STRAIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, STRAIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT016 – Lenox/Hilmor 3-Blade Sheet Metal Crimper
$24.00Lenox/Hilmor 3-Blade Sheet Metal Crimper. Professional quality hand tools are a must on the job site. Never be without a set of crimpers when duct/pipe fitting is part of your job. Use the 3-Blade Crimpers to fit same-size sheet metal snap-lock pipe end to end with ease.
-
HCT017 – Lenox/Hilmor 3 inch Seamer
$47.00Lenox/Hilmor 3 inch Seamer. Professional quality hand tools are a must on the job site. Never be without a set of seamers when duct/pipe fitting is part of your job. Use the 3 inch Seamer to make small sheet metal bends and simple fabrications.
-
HCT018 – Lenox/Hilmor 1 inch V-Notcher
$36.00Lenox/Hilmor 1 inch V-Notcher. Professional quality hand tools are a must on the job site. Never be without a set of notchers when duct/pipe fitting is part of your job. Use the 1 inch notcher to make small sheet metal notches for simple fabrications.
-
HCT019 – Lenox/Hilmor Duct Knife.
$26.00Lenox/Hilmor Duct Knife. Professional quality hand tools are a must on the job site. Never be without a dual sided, specially purposed Duct Knife when the job requires. Make clean cuts through duct insulation or duct board.
-
HCT020 – Lenox/Hilmor 12-in-1 Fin Comb
$25.00Lenox/Hilmor 12-in-1 Fin Comb. Professional quality hand tools are a must on the job site. Never clean or maintain a cooling coil without repairing damaged fins. Use the 12-in-1 Fin Comb to straighten bent over fins, restoring coil efficiecy.
-
HCT021 – Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver
$26.00Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver. Professional quality hand tools are a must on the job site. Never be without a professional nut driving tool to remove and install the most common sized screw heads in the HVAC industry.
-
HCT022 – Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver
$31.00Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver. Professional quality hand tools are a must on the job site. This 9-in-1 driver tool puts the most common driver bits in the HVAC industry at your fingertips.
-
HCT024 – Lenox/Hilmor 6-in-1 Stubby Multi-Driver
$13.00Lenox/Hilmor 6-in-1 Stubby Multi-Driver. Professional quality hand tools are a must on the job site. This 6-in-1 driver tools puts some of the most common driver bits at your finger tips in a STUBBY Style driver.
-
TAP001 – Aluminum Foil Duct Tape.
$25.00Aluminum Foil Duct Tape. 2-1/2″ x 60 Yards. U/L 181A-P Listed. Perfect for sealing duct work openings, to the NADCA Standard, ACR2013.
-
-
TAP010 – Travel-Tack – Low VOC installation adhesive, 12 ounce can
$14.00Travel-Tack is a self-contained, instant-tacking portable spray system engineered to deliver a low-pressure web spray that eliminates adhesive vaporization and over-spray. Its portability, limited equipment clean-up and low equipment cost make this adhesive ideal for shop or field use. Travel-Tack passes ASTM C916, SCAQMD Rule #1168, and has the City of Los Angeles Approval RR #8069.
-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
TAP012 – Foil-Grip 1402 – Indoor/outdoor rolled mastic sealant – unprinted – 3″ x 100′ roll
$50.00Foil-Grip 1402 is a pressure-sensitive, 40-year cycle, duct joint and general purpose rolled mastic sealant. It provides an instant water-resistant grip to most surfaces including sheet metal, duct board, flex board, PVC-coated duct, and duct wrap vapor barriers. Foil-Grip 1402 is suitable for sub-grade application on PVC-coated duct.
-
TAP013 – Foil Grip 1403 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Rated 4.00 out of 5Foil-Grip 1403-181BFX is a UL 181B-FX listed pressure sensitive, 40-year cycle, duct joint and general purpose rolled sealant. Foil-Grip 1403-181BFX provides an instant water resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC coated duct, and duct wrap vapor barriers. Foil-Grip 1403-181BFX is suitable for subgrade application on PVC coated duct and is ideal for replacement applications.
-
TAP014 – Foil Grip 1404 – Indoor/Outdoor Rolled Mastic Sealant, Unprinted, 3″ x 100′.
$58.00Foil-Grip 1404-181-BFX is a UL 181B-FX listed pressures sensitive rolled mastic sealant. The Foil-Grip 1404-181-BFX has superior tack for instant grab strength to galvanized metal, flex duct, PVC coated pipe, and PVC coated ductwork for an immediate airtight bond. The foil facer/butyl adhesive composite provides excellent UV resistance coupled with outstanding water resistance. The easy tear provides a fast installation for airtight seals on above and below grade ductwork applications.
-
TAP015 – Aluma Grip AFT-701 – Indoor/outdoor rolled mastic sealant – 4″ x 50′ roll
$45.00Aluma-Grip AFT-701 is a heavy-duty, pressure-sensitive, 40-year-cycle, duct joint rolled sealant. AFT-701 provides an aggressive water-resistant grip to most surfaces including sheet metal, duct board, flex duct, PVC-coated duct, and duct wrap vapor barriers. AFT-701 is also suitable for sub-grade application on PVC-coated duct. Eligible for a 5-year stand-alone warranty and a 10-year warranty when used in the Foil-Sealant Sealing System.