HVAC Air Duct Cleaning is a growing industry that serves markets from residential to heathcare, and everything in between. Increased concern regarding Indoor Air Quality (IAQ) is a driving force bringing to light the contaminants that are present in today’s buildings. The duct system is the building’s breathing structure, and can have higher concentrations of dirt, microbial growth, and other harmful substances than the floors of public restrooms.
10″ Quick Clamp. The 10″ Quick Clamp is the fastest way to secure your washable filter bag to the General and Ranger power vacuum. The 10″ Quick Clamp fits around collar sizes that measure 10″ diameter and comes with a cotter pin for locking.
ENG142 – 5 Gallon SureCan Gas Can – This is not your same old, hard to use, spill on yourself Gas Can. SureCan is a High Quality fuel dispensing machine 100% Made in the USA! SureCan is the first of its kind and the only Gas Can available with the spout at the bottom and thumb control button on top that allows one handed use to Feed Your Machines. The flexible spout rotates down more than 180 degrees and fits perfectly into any machines fill location while the thumb release button on top controls the flow. By pulling straight back on the safety trigger and then down on the thumb button, fuel is then released immediately while you stay in complete control the entire time. As fuel reaches the top of the tank, let off the thumb button slowing the flow down so that the fill tank does not overflow. This means for you, no more bending over, tipping your fuel can forward and holding it in an awkward position! Not only is SureCan easy to use it is the most durable gas can on the market!
ENG146 – SureCan Replacement Thumb Valve (2.2 Gal & 5 Gal)
ENG147 – SureCan Replacement Spout Assembly (2.2 Gal & 5 Gal)
2″ – 12″ Hole Cutter. Cut a perfect circle in up to #20 gauge sheet metal with this tool. Connect your duct cleaning vacuum hose to a round hole with a Snap Adaptor for ideal airflow.
Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
Hinged Access Door for Sheet Metal Duct Work. 10″ x 10″ Hinged Door is Secured with One Cam-Lock. Door contains 5/8″ knock-over tabs for easy installation.
Cammed Access Door for Sheet Metal Duct Work. 10″ x 10″ Hinged Door is Secured with 2 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
Hinged Access Door for Sheet Metal Duct Work. 10″ x 10″ Hinged Door is Secured with One Cam-Lock. Pressure Sensitive Adhesive flange for easy installation.
Cammed Access Door for Sheet Metal Duct Work. 10″ x 10″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
8″ x 8″ x 10″ Y-Hose Splitter. Adapt your vacuum hose run from ONE 10″ diameter hose to TWO 8″ diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10″ diameter hose to TWO 8″ diameter hoses. Other sizes are available on Special Order.
10″ x 8″ Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 10″ diameter hose to ONE 8″ diameter hose.
10″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 10″ hose.
10″ Tapered Starter Collar. The 10″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 10″ Tapered Starter Collar to steel duct work.
10″ Snap Adaptor. The 10″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 10″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 10″ Snap Adaptor to steel duct work.
ENG147 - SureCan Replacement Spout Assembly (2.2 Gal & 5 Gal)
1 × $10.00 
DSR005 - Envirocon 5-Gallon Jug.* SHIPPING DISCLAIMER 4.1 APPLIES
1 × $135.00 Subtotal: $145.00
