HVAC Air Duct Cleaning is a growing industry that serves markets from residential to heathcare, and everything in between. Increased concern regarding Indoor Air Quality (IAQ) is a driving force bringing to light the contaminants that are present in today’s buildings. The duct system is the building’s breathing structure, and can have higher concentrations of dirt, microbial growth, and other harmful substances than the floors of public restrooms.
-
DVB105 – Plug-In SmartPhone Vane Anemometer
$88.00Plug-In SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB105 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB105 shows airflow in FPM, CFM, CMH, MPS. Send onsite professional reports from you SmartPhone or Device by email. The DVB105 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to SMART devices via 1/8″ mini-plug.
-
DVB106 – Wireless SmartPhone Vane Anemometer
$140.00Wireless/Bluetooth SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB106 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB106 shows airflow in FPM, CFM, CMH, MPS. Use DVB106 to also measure Temperature, Humidity and Air Pressure. Send onsite professional reports from your SmartPhone or Device by email. The DVB106 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to Smart Devices VIA Bluetooth.
-
HCT013 – Lenox/Hilmor Aviation Tin Snips, LEFT
$24.00Lenox/Hilmor Aviation Tin Snips, LEFT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT014 – Lenox/Hilmor Aviation Tin Snips, RIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, RIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT015 – Lenox/Hilmor Aviation Tin Snips, STRAIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, STRAIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT016 – Lenox/Hilmor 3-Blade Sheet Metal Crimper
$24.00Lenox/Hilmor 3-Blade Sheet Metal Crimper. Professional quality hand tools are a must on the job site. Never be without a set of crimpers when duct/pipe fitting is part of your job. Use the 3-Blade Crimpers to fit same-size sheet metal snap-lock pipe end to end with ease.
-
HCT017 – Lenox/Hilmor 3 inch Seamer
$47.00Lenox/Hilmor 3 inch Seamer. Professional quality hand tools are a must on the job site. Never be without a set of seamers when duct/pipe fitting is part of your job. Use the 3 inch Seamer to make small sheet metal bends and simple fabrications.
-
HCT018 – Lenox/Hilmor 1 inch V-Notcher
$36.00Lenox/Hilmor 1 inch V-Notcher. Professional quality hand tools are a must on the job site. Never be without a set of notchers when duct/pipe fitting is part of your job. Use the 1 inch notcher to make small sheet metal notches for simple fabrications.
-
HCT019 – Lenox/Hilmor Duct Knife.
$26.00Lenox/Hilmor Duct Knife. Professional quality hand tools are a must on the job site. Never be without a dual sided, specially purposed Duct Knife when the job requires. Make clean cuts through duct insulation or duct board.
-
HCT020 – Lenox/Hilmor 12-in-1 Fin Comb
$25.00Lenox/Hilmor 12-in-1 Fin Comb. Professional quality hand tools are a must on the job site. Never clean or maintain a cooling coil without repairing damaged fins. Use the 12-in-1 Fin Comb to straighten bent over fins, restoring coil efficiecy.
-
HCT021 – Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver
$26.00Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver. Professional quality hand tools are a must on the job site. Never be without a professional nut driving tool to remove and install the most common sized screw heads in the HVAC industry.
-
HCT022 – Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver
$31.00Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver. Professional quality hand tools are a must on the job site. This 9-in-1 driver tool puts the most common driver bits in the HVAC industry at your fingertips.
-
HCT024 – Lenox/Hilmor 6-in-1 Stubby Multi-Driver
$13.00Lenox/Hilmor 6-in-1 Stubby Multi-Driver. Professional quality hand tools are a must on the job site. This 6-in-1 driver tools puts some of the most common driver bits at your finger tips in a STUBBY Style driver.
-
VAC300 – HEPA Filtered Wet/Dry Bucket Vac
$181.00HEPA Filtered Wet/Dry Bucket Vac. The Bucket Vac is the handy HEPA you need for all restoration jobs from air duct cleaning, mold remediation, or attic retrofit. The vacuum head connects to just about any 5 gallon bucket and comes complete with a 7 piece tool kit ( 60″ Vacuum Hose, (2)12″ Extension Wands, Crevice Tool, Round Brush, Floor Tool, and Bulk/Water Pick-up Tool). Need extra buckets for jobs with extra debris, use VAC302. Use the Bucket Vac to collect lint during a dryer vent cleaning, indoors or outdoors.
-
VAC302 – 5-Gallon Bucket, Red.
$11.005-Gallon Bucket, Red. The Meyer Machine Bucket is handy for use as a tool bucket, slop sink, washing registers, and use on the HEPA Filtered Bucket Vac, VAC300. Carry extra 5-Gallon buckets on your truck for the unknown dirty job that requires haul-out.
-
VAC308 – Bucket Vac Replacement Filter Bags. 6-Pack.
$44.00Bucket Vac Replacement Filter Bags. 6-Pack.
-
VAC309 – HEPA Filter Element for Bucket Vac.
$78.00HEPA Filter Element for Bucket Vac. Replacment filter element for the Bucket Vac is easy to install. Use the HEPA Filter for wet and dry vacuuming applications with the Bucket Vac, VAC300.
-
VAC401 – Pac-Vac
$515.00HEPA FILTERED BACK-PACK VACUUM
– 5.5′ CRUSH-PROOF HOSE, 50′ CORD, 5-PIECE TOOL KIT
– 150 CFM, 100″ H2O LIFT
– 7-POINT ADJUSTABLE HARNESS -
VAC402 – Mighty-Vac
$560.00WET/DRY CANNISTER CONTACT VACUUM
– 25′ CRUSH-PROOF HOSE, 35′ CORD, 5-PIECE TOOL KIT
– 250 CFM, 110″ H2O LIFT, 1200 WATT
– 8 GALLON TANK W/ 5-YEAR WARRANTY -
VAC403 – Max-Vac
$1,095.00WET/DRY HEPA CONTACT VACUUM
– 25′ CRUSH-PROOF HOSE, 35′ CORD, 5-PIECE TOOL KIT
– 425-600 CFM, 110″ H2O LIFT, 1200/2400 WATT
– 20 GALLON TANK W/ 5-YEAR WARRANTY
