HVAC Air Duct Cleaning is a growing industry that serves markets from residential to heathcare, and everything in between. Increased concern regarding Indoor Air Quality (IAQ) is a driving force bringing to light the contaminants that are present in today’s buildings. The duct system is the building’s breathing structure, and can have higher concentrations of dirt, microbial growth, and other harmful substances than the floors of public restrooms.
-
AGR631-08 – 8″ Soft Button-Lock Brush
$29.008″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR641-08 – 8″ Stiff Button-Lock Brush
$29.008″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR652-08 – 8″ Corner Button-Lock Brush
$39.008″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
HCT001 – 2″ – 12″ Hole Cutter.
$76.002″ – 12″ Hole Cutter. Cut a perfect circle in up to #20 gauge sheet metal with this tool. Connect your duct cleaning vacuum hose to a round hole with a Snap Adaptor for ideal airflow.
-
HCT002 – Replacement cutting bit for Adjustable Hole Cutter.
$15.00Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
-
PAT007 – 8″ x 8″ Sheet metal duct patch, 25 pack.
$41.588″ x 8″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 6″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
PAT221-08 – Hinged-DT Access Door, 8″x8″
$24.00Hinged Access Door for Sheet Metal Duct Work. 8″ x 8″ Hinged Door is Secured with One Cam-Lock. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT222-08 – Cammed-DT Access Door, 8″x8″
$24.00Cammed Access Door for Sheet Metal Duct Work. 8″ x 8″ Hinged Door is Secured with 2 Cam-Locks. Door contains 5/8″ knock-over tabs for easy installation.
-
PAT223-08 – Hinged-PSA Access Door, 8″x8″
$26.00Hinged Access Door for Sheet Metal Duct Work. 8″ x 8″ Hinged Door is Secured with One Cam-Lock. Pressure Sensitive Adhesive flange for easy installation.
-
PAT224-08 – Cammed-PSA Access Door,8″x8″
$26.00Cammed Access Door for Sheet Metal Duct Work. 8″ x 8″ Hinged Door is Secured with 2 Cam-Locks. Pressure Sensitive Adhesive flange for easy installation.
-
RDC086 – 8″ x 6″ Steel Hose Reducer.
$72.008″ x 6″ Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 8″ diameter hose to ONE 6″ diameter hose.
-
RDC102 – 8″ x 8″ x 10″ Y-Hose Splitter.
$254.008″ x 8″ x 10″ Y-Hose Splitter. Adapt your vacuum hose run from ONE 10″ diameter hose to TWO 8″ diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10″ diameter hose to TWO 8″ diameter hoses. Other sizes are available on Special Order.
-
RDC108 – 10″ x 8″ Steel Hose Reducer.
$97.0010″ x 8″ Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 10″ diameter hose to ONE 8″ diameter hose.
-
SLV008 – 8″ Diameter Hose Sleeve.
$33.008″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 8″ hose.
-
STC008 – 8″ Tapered Starter Collar.
$83.008″ Tapered Starter Collar. The 8″ Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 8″ Tapered Starter Collar to steel duct work.
-
STC108 – 8″ Snap Adaptor.
$140.008″ Snap Adaptor. The 8″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 8″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 8″ Snap Adaptor to steel duct work.
-
STC208 – 8″ Floor Vent Hose Adaptor
$181.008″ Floor Vent Hose Adaptor. Use the 8″ Floor Vent Hose Adaptor in unconventional air duct cleaning system hook-ups. Down-Flow furnaces that run duct work through slab are hard to get to, but the 8″ Floor Vent Hose Adaptor solves the problem. 1″ access holes make for easy insertion of cleaning tools.
-
TAP005 – Vent / Grill Mask Tape.
$28.00Vent / Grill Mask Tape. 8″ x 200′ with 4″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
