HVAC Air Duct Cleaning is a growing industry that serves markets from residential to heathcare, and everything in between. Increased concern regarding Indoor Air Quality (IAQ) is a driving force bringing to light the contaminants that are present in today’s buildings. The duct system is the building’s breathing structure, and can have higher concentrations of dirt, microbial growth, and other harmful substances than the floors of public restrooms.
-
SCR850 – Sheet Metal Zip Screws.
$10.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 500 per package.
-
HCT024 – Lenox/Hilmor 6-in-1 Stubby Multi-Driver
$13.00Lenox/Hilmor 6-in-1 Stubby Multi-Driver. Professional quality hand tools are a must on the job site. This 6-in-1 driver tools puts some of the most common driver bits at your finger tips in a STUBBY Style driver.
-
HCT002 – Replacement cutting bit for Adjustable Hole Cutter.
$15.00Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
-
SLV004 – 4″ Diameter Hose Sleeve.
$19.004″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 4″ hose.
-
SLV003 – 3″ Diameter Hose Sleeve.
$19.003″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 3″ hose.
-
HCT013 – Lenox/Hilmor Aviation Tin Snips, LEFT
$24.00Lenox/Hilmor Aviation Tin Snips, LEFT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT014 – Lenox/Hilmor Aviation Tin Snips, RIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, RIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT015 – Lenox/Hilmor Aviation Tin Snips, STRAIGHT
$24.00Lenox/Hilmor Aviation Tin Snips, STRAIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn’t permit.
-
HCT016 – Lenox/Hilmor 3-Blade Sheet Metal Crimper
$24.00Lenox/Hilmor 3-Blade Sheet Metal Crimper. Professional quality hand tools are a must on the job site. Never be without a set of crimpers when duct/pipe fitting is part of your job. Use the 3-Blade Crimpers to fit same-size sheet metal snap-lock pipe end to end with ease.
-
HCT020 – Lenox/Hilmor 12-in-1 Fin Comb
$25.00Lenox/Hilmor 12-in-1 Fin Comb. Professional quality hand tools are a must on the job site. Never clean or maintain a cooling coil without repairing damaged fins. Use the 12-in-1 Fin Comb to straighten bent over fins, restoring coil efficiecy.
-
HCT019 – Lenox/Hilmor Duct Knife.
$26.00Lenox/Hilmor Duct Knife. Professional quality hand tools are a must on the job site. Never be without a dual sided, specially purposed Duct Knife when the job requires. Make clean cuts through duct insulation or duct board.
-
HCT021 – Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver
$26.00Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver. Professional quality hand tools are a must on the job site. Never be without a professional nut driving tool to remove and install the most common sized screw heads in the HVAC industry.
-
SLV006 – 6″ Diameter Hose Sleeve.
$26.006″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 6″ hose.
-
CAS119-F – 5′ Flexible Hurricane Rod
$26.005′ Flexible Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Flexible Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
-
CAS119-M – 5′ Medium Hurricane Rod
$26.005′ Medium Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Medium Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
-
AGR631-04 – 4″ Soft Button-Lock Brush
$28.004″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR631-08 – 8″ Soft Button-Lock Brush
$29.008″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR641-08 – 8″ Stiff Button-Lock Brush
$29.008″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR661-04 – 4″ Abrasive Button-Lock Brush
$29.004″ Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR661-06 – 6″ Abrasive Button-Lock Brush
$30.006″ Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
HCT022 – Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver
$31.00Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver. Professional quality hand tools are a must on the job site. This 9-in-1 driver tool puts the most common driver bits in the HVAC industry at your fingertips.
-
SLV008 – 8″ Diameter Hose Sleeve.
$33.008″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 8″ hose.
-
AGR632-12 – 12″ Soft Button-Lock Brush
$36.0012″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR642-12 – 12″ Stiff Button-Lock Brush
$36.0012″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
HCT018 – Lenox/Hilmor 1 inch V-Notcher
$36.00Lenox/Hilmor 1 inch V-Notcher. Professional quality hand tools are a must on the job site. Never be without a set of notchers when duct/pipe fitting is part of your job. Use the 1 inch notcher to make small sheet metal notches for simple fabrications.
-
SLV010 – 10″ Diameter Hose Sleeve.
$37.0010″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 10″ hose.
-
AGR652-08 – 8″ Corner Button-Lock Brush
$39.008″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR642-16 – 16″ Stiff Button-Lock Brush
$41.0016″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR652-12 – 12″ Corner Button-Lock Brush
$41.0012″ Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
PAT007 – 8″ x 8″ Sheet metal duct patch, 25 pack.
$41.588″ x 8″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 6″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
