Subtotal: $195.00
HVAC Air Duct Cleaning is a growing industry that serves markets from residential to heathcare, and everything in between. Increased concern regarding Indoor Air Quality (IAQ) is a driving force bringing to light the contaminants that are present in today’s buildings. The duct system is the building’s breathing structure, and can have higher concentrations of dirt, microbial growth, and other harmful substances than the floors of public restrooms.
-
GEN200 – 20 HP General Power Vacuum.
$5,200.00[pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/06/General.pdf" title="General.PDF Download"][pdf-embedder url="https://www.meyermachine.com/wp-content/uploads/2020/11/IOM_GENERAL.pdf"]
20 HP General Power Vacuum. The General is All the Vacuum You’ll Need for Duct Cleaning. Kohler Command Engine, 5,250 CFM, Portable 4-Wheel Cart.
If your Air Duct Cleaning Crew needs a vacuum collector with Serious Suction… Look No Further. The General delivers ‘Duct-Truck’ like performance at a fraction of the price and without being tied to the curb.
The General is the vacuum/collector you need for a powerful start in the air duct cleaning business. The General has the versatility to tackle residential, light commercial, and indsutrial application cleaning projects.
The General is a high powered Gas Portable Air Duct Cleaning Vacuum that features a portable four-wheeled cart for placement at the job-site in the most opportunistic spot. On many residential air duct cleaning projects, the General can be connected to the air duct system with 50′-75′ of vacuum hose, allowing for maximum airflow by the vacuum.
Excessive hose runs, and long setup times are a thing of the past when your cleaning crew operates The General. With average hose runs between 50′-75′, setup times for a two-man crew can be limited to 10 minutes; storing truck-loads of bulky hose for residential cleaning projects can be a problem of the past.
The material handling fan-wheel on The General, allows for constant airflow of 5,250 CFM through the entire cleaning process. Dirty filters in the airstream are a non-issue with The General. An oversize cloth filter bag acts as the filter device, and a large cannister collects removed debris for disposal.
As air duct cleaning projects increase in size, airflow should in turn also increase. The coupling of two General power vacuums together is an effective, low cost method for increasing airflow on projects that demand it. In light commercial and industrial applications, The General is capable of pulling through hose-runs up to 250′ in length. The General is also available with Alternate Fuel/Power Options including LP-GAS and Electric Motor. For industrial applications that allow the combustion of LP-GAS engines indoors, bring The General indoors to reduce hose runs and increase airflow. Filtration cabinets are available for LP-GAS and Electric Powered vacuum arrangements that can provide CLASS 100, HEPA filtered air.
The General Air Duct Cleaning system can be comfortably set-up in a box truck or enclosed trailer, sized 6′ x 12′ or larger. Complete cleaning packages are available for all applications including residential, light commercial, industrial, and other special arrangements. Plan your custom package with the sales team, or choose from the popular arrangments that include The General, a powerful air compressor, vacuum hose, compressed air cleaning whips, duct brushes, tools, and materials necessary to access and make proper closure to many types of ductwork.
-
IAQ005 – 4-Channel Particle Counter
$2,318.004-Channel Particle Counter
– Measures: 0.3, 0.5, 0.7, 1.0, 2.5, 5.0, 10.0 microns
– 30 Hour Battery
– USB, Software Included
– 1st Reading in 3 Seconds -
DSR244 – Pan-Grip Flex 2 gallon kit
$824.00Pan-Grip Flex is a multicomponent novolac based elastomeric epoxy product that is ideal for residential, commercial and industrial applications requiring high elongation in typical environments. It is able to withstand moisture, manage temperature changes, and adjust from freeze to thaw. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The elastomeric properties of Pan-Grip Flex make the product ideal for surfaces where slight movement is expected (i.e. AHU floor, etc.). The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer.
-
GEN930 – OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums
$348.00OSHA/EPA Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums. The bolt-on fuel cell kit comes with drill templates for retro-fit on older vacuums, new vacuums are pre-drilled and ready for installation. The kit includes a 6-gallon Flambeau tank, a heavy duty frame, the required hoses, and all the necessary hardware. Installation of this kit removes the necessity of detatchable fuel cells and any quick-disconnect fittings. Add this item to your new vacuum purchase. Carbon cannister (GEN933) not included. For CARB compliancy add P/N: GEN933 to your order.
-
DSR002 – Oxine AD 16 oz. – 6 Pack
$340.00Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 16 oz. bottle concentrate mixes into 5 gallons of usable solution. 6 bottles to a case.Download MSDS
-
DSR232 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – Black
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR231 – Smoke & Soot Post Fire Smoke Encapsulant & Odor Remover – White
$315.00Hardcast Smoke & Soot is a spray-applied coating that resists microbial growth, locks down offensive particles, and removes odors from the air-stream of fugitive emissions from fire deposits below the detectable limit. Designed with an EPA registered chemical package, this coating was engineered to be used on ductwork and insulation that has been exposed to smoke and soot from a fire to negate the need to replace the entire duct by merely resurfacing the existing substrate.
-
DSR243 – Pan-Grip 1 gallon kit
$293.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
DSR211 – RS-100 Interior Restoration Duct Sealant
$290.00RS-100 is a water-based spray sealant engineered to seal joints, penetrations and seams from inside of the HVAC ductwork. The superior physical properties of this non-tack sealant will meet and exceed the SMACNA pressure classes and its flexibility allows for system operation without cracking. RS-100 sealant is formulated with EPA registered chemicals to resist microbial growth on the surface of the sealant.
-
RDC102 – 8″ x 8″ x 10″ Y-Hose Splitter.
$254.008″ x 8″ x 10″ Y-Hose Splitter. Adapt your vacuum hose run from ONE 10″ diameter hose to TWO 8″ diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10″ diameter hose to TWO 8″ diameter hoses. Other sizes are available on Special Order.
-
DSR001 – Oxine AD -12 Pack
$250.00Oxine AD for use in HVAC Air Ducts. Use Oxine AD to act as a static agent in HVAC Air Ducts. Static agents are those that prevent microorganisms from replicating and are the best alternative to a sanitizer. 12 vials to a case, each vial mixes into 1 Gallon of usable solution.Download MSDS
-
SCR851 – Sheet Metal Zip Screws.
$245.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 15,000 per package.
-
FOG020 – The Squall
$232.00The Squall Cold Mist Fogger Attachment. The Squall is a remote venturi air/liquid mixing nozzle, specifically designed for use in air ducts and on HVAC equipment. The design allows for a cleaning technician to attach it to standard compressed air duct cleaning extension lines like the Hurricane. Using compressed air its power source, the treatment liquid is drawn through the liquid line to the mixing nozzle where it is then sprayed out in a micro-drop mist. By leveraging the use of existing compressed air extension lines, the Squall cold mist fog can be applied from within the duct, providing consistent product application as the nozzle is retracted back toward the technician. Additionally, The Squall can be used for directed or general broadcast cold mist fog outside of an air duct. Download Fogging Catalog Page.
-
DSR212 – Hardcast Spray Seal, 5 Gal.
$220.00Hardcast Spray Seal, 5 Gal. Spray-Seal is an all-purpose high performance sprayable sealant for use on all types of metal duct, ?berglass duct board, duct fabric and ?ex duct. Distinguished by its ability to accommodate minor vibration and movement, Spray-Seal stays ?exible and will not crack. Spray-Seal decreases labor substantially and increases productivity while using less material. 10 Year Outdoor Warranty when combined with an AFT-701 combination system.
-
PPE022 – Honeywell North Full-Face Respirator – Medium/Large
$201.00HONEYWELL NORTH FULL FACE RESPIRATOR – M/L. SCRATCH RESIST 200 DEG POLY-CARB LENS. THREADED FILTER & CARTRIDGE ATTACHMENT. FILTERS/CARTRIDGES SOLD SEPARATE
-
DSR222 – RE-500 Interior Coating/Insulation Encapsulant – Black
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
DSR221 – RE-500 Interior Coating/Insulation Encapsulant – White
$195.00RE-500, now with complete one-coat coverage, is a high-performance, spray-applied insulation encapsulant and coating for use inside HVAC ductwork. RE-500 is formulated with EPA-registered chemicals to resist microbial growth on the surface of the coating. At 13 g/l, this low VOC coating is ideal for critical projects such as hospital and schools. The semi-gloss finish provides a non-stick surface that will inhibit fiberglass degradation and debris accumulation that could lead to mold and mildew growth.
-
ZBG004 – 48″ diameter zone bag.
$183.0048″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
VAC300 – HEPA Filtered Wet/Dry Bucket Vac
$181.00HEPA Filtered Wet/Dry Bucket Vac. The Bucket Vac is the handy HEPA you need for all restoration jobs from air duct cleaning, mold remediation, or attic retrofit. The vacuum head connects to just about any 5 gallon bucket and comes complete with a 7 piece tool kit ( 60″ Vacuum Hose, (2)12″ Extension Wands, Crevice Tool, Round Brush, Floor Tool, and Bulk/Water Pick-up Tool). Need extra buckets for jobs with extra debris, use VAC302. Use the Bucket Vac to collect lint during a dryer vent cleaning, indoors or outdoors.
-
STC112 – 12″ Snap Adaptor.
$150.0012″ Snap Adaptor. The 12″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 12″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 12″ Snap Adaptor to steel duct work.
-
STC110 – 10″ Snap Adaptor.
$145.0010″ Snap Adaptor. The 10″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 10″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 10″ Snap Adaptor to steel duct work.
-
DVB106 – Wireless SmartPhone Vane Anemometer
$140.00Wireless/Bluetooth SmartPhone Vane Anemometer. Use DVB105 to measure airflow velocity up to 11,000 ft/min. DVB106 features a SmartPhone APP that allows for record keeping, register dimensioning, and automatic CFM conversion. DVB106 shows airflow in FPM, CFM, CMH, MPS. Use DVB106 to also measure Temperature, Humidity and Air Pressure. Send onsite professional reports from your SmartPhone or Device by email. The DVB106 is a perfect low cost solution for measuring airflow velocities for the DEDP Testing protocol and HVAC registers. Download the APP here for ANDROID, and IOS. This device connects to Smart Devices VIA Bluetooth.
-
STC108 – 8″ Snap Adaptor.
$140.008″ Snap Adaptor. The 8″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 8″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 8″ Snap Adaptor to steel duct work.
-
DSR006 – Envirocon 5-Gallon Jug. * SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored.* SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
DSR005 – Envirocon 5-Gallon Jug.* SHIPPING DISCLAIMER 4.1 APPLIES
$135.00Envirocon 5-Gallon Jug. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and can be applied to an atomizing, variable flow fogger. 7-Day Lead time on all orders. Expedited shipping will not be honored. * SHIPPING DISCLAIMER 4.1 APPLIESDownload MSDS
-
DSR004 – Envirocon Spray Bottles.
$135.00Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product has a light peppermint scent and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored.  Download MSDS
-
DSR003 – Envirocon Spray Bottles.
$135.00Envirocon Spray Bottles. Envirocon Deodorizer can be used to spray non-porous surfaces that may contain odor causing microbial growth. Envirocon works by neutralizing chemical compounds that produce foul odors. This product is unscented and contains 12-Quart sized spray bottles. 7-Day Lead time on all orders. Expedited shipping will not be honored. Download MSDS
-
DPL005 – 1″ diameter duct plugs.
$135.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 3,000 per package.
-
ZBG003 – 36″ diameter zone bag.
$133.0036″ diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.
-
PAT012 – 12″ x 12″ Cross-Broken Sheet metal duct patch, 25 pack
$131.3212″ x 12″ Cross-Broken Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal with a cross-break for extra strength, and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 10″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. *** Please allow up to 7 days processing for this order. Expedited shipping methods will be honored when the inventory is available, not when the order is purchased.