DSR222 - RE-500 Interior Coating/Insulation Encapsulant - Black Subtotal: $195.00
HVAC Air Duct Cleaning is a growing industry that serves markets from residential to heathcare, and everything in between. Increased concern regarding Indoor Air Quality (IAQ) is a driving force bringing to light the contaminants that are present in today’s buildings. The duct system is the building’s breathing structure, and can have higher concentrations of dirt, microbial growth, and other harmful substances than the floors of public restrooms.
-
TAP005 – Vent / Grill Mask Tape.
$28.00Vent / Grill Mask Tape. 8″ x 200′ with 4″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
PAT008 – 10-1/2″ x 10-1/2″ Sheet metal duct patch, 25 pack.
$53.7510-1/2″ x 10-1/2″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 8″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
DPL003 – 1″ diameter duct plugs.
$32.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 500 per package.
-
SCR850 – Sheet Metal Zip Screws.
$10.00Sheet Metal Zip Screws. #8 x 1/2″ self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4″ hex head and slotted screw driver. 500 per package.
-
HCT002 – Replacement cutting bit for Adjustable Hole Cutter.
$15.00Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.
-
PAT007 – 8″ x 8″ Sheet metal duct patch, 25 pack.
$41.588″ x 8″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 6″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
DPL002 – 2-1/2″ diameter duct plugs.
$48.002-1/2″ diameter duct plugs. These soft plastic duct plugs fit inside a 2-1/2″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 16″ or larger. 100 per package.
-
SLV008 – 8″ Diameter Hose Sleeve.
$33.008″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 8″ hose.
-
TAP011 – Edge Sealer Aerosol Spray Insulation Adhesive, 12 ounce can
$14.00Edge Sealer is engineered to coat the cut ends of fiberglass duct liner, wrapped insulation, rigid fiberglass duct board and foam insulation. Edge Sealer’s exceptional spray pattern provides complete coverage and encapsulation of exposed insulation.
-
PAT010 – 12″ x 12″ Sheet metal duct patch, 25 pack.
$59.2112″ x 12″ Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 10″ Hose Connections, to the NADCA Standard, ACR2013. *** DUE TO CURRENT INDUSTRY WIDE MATERIAL SHORTAGES, MAXIMUM ORDER SIZE OF 100 PCS / ORDER (4 PACKAGES). PHONE ORDERS ONLY, 800-728-3828. ***
-
CLP021 – 10″ Quick Clamp
$26.0010″ Quick Clamp. The 10″ Quick Clamp is the fastest way to secure your washable filter bag to the General and Ranger power vacuum. The 10″ Quick Clamp fits around collar sizes that measure 10″ diameter and comes with a cotter pin for locking.
-
DPL005 – 1″ diameter duct plugs.
$135.001″ diameter duct plugs. These soft plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6″ or larger. 3,000 per package.
-
SLV006 – 6″ Diameter Hose Sleeve.
$26.006″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 6″ hose.
-
AGR631-08 – 8″ Soft Button-Lock Brush
$29.008″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
AGR631-04 – 4″ Soft Button-Lock Brush
$28.004″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
CAS119-F – 5′ Flexible Hurricane Rod
$26.005′ Flexible Hurricane Rod. Flexible Hurricane Rods are the ideal tool for compressed air cleaning of duct work in residential & light commercial settings. Use the 5′ Flexible Hurricane Rods to connect extensions to reach down branch duct work up to 30′ in length.
-
SLV004 – 4″ Diameter Hose Sleeve.
$19.004″ Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 4″ hose.
-
PPE021 – Honeywell Half-Face Respirator – Large
$26.00HONEYWELL NORTH HALF FACE RESPIRATOR – L. COMFORTABLE, LIGHTWEIGHT DESIGN. THREADED FILTER & CARTRIDGE ATTACHMENT. FILTERS/CARTRIDGES SOLD SEPARATE
-
AGR632-12 – 12″ Soft Button-Lock Brush
$36.0012″ Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
SDR001 – Lenox 1″ Uni-Bit Step Drill.
$54.00Lenox 1″ Uni-Bit Step Drill. This high quality drill bit cuts through sheet metal in seconds to create holes from 3/8″ – 1″ diameter. Fits in any drill with 3/8″ or larger chuck.
-
AGR661-04 – 4″ Abrasive Button-Lock Brush
$29.004″ Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.
-
PPE020 – Honeywell Half-Face Respirator – Medium
$26.00HONEYWELL NORTH HALF FACE RESPIRATOR – M. COMFORTABLE, LIGHTWEIGHT DESIGN. THREADED FILTER & CARTRIDGE ATTACHMENT. FILTERS/CARTRIDGES SOLD SEPARATE
-
STC108 – 8″ Snap Adaptor.
$140.008″ Snap Adaptor. The 8″ Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 8″ Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 8″ Snap Adaptor to steel duct work.
-
TAP001 – Aluminum Foil Duct Tape.
$25.00Aluminum Foil Duct Tape. 2-1/2″ x 60 Yards. U/L 181A-P Listed. Perfect for sealing duct work openings, to the NADCA Standard, ACR2013.
-
TAP006 – 24″ Vent / Grill Mask Tape.
$82.00Vent / Grill Mask Tape. 24″ x 200′ with 12″ perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.
-
DPL001 – 1″ diameter duct plugs.
$85.001″ diameter duct plugs. These hard plastic duct plugs fit inside a 1″ hole, in sheet metal from #16 – #30 gauge. Plugs fit flush on flat surfaces and are not compatible with round duct work. 500 per package. *** THIS PRODUCT MAY DELIVER AS A SPECIAL ORDER, EXPECT A LEAD TIME OF 5-7 DAYS *** EXPEDITED SHIPPING WILL NOT BE HONORED FOR THIS ITEM.
-
PPE025 – Honeywell VAPOR/GAS/P100 Combo-Cartridge
$47.00HONEYWELL NORTH RESPIRATOR FILTER/CARTRIDGE COMBO. THREADS ONTO NORTH HALF/FULL FACE RESPIRATORS. ORGANIC VAPOR / ACID GAS / P100 FILTER.(SOLD AS A 2-PACK)
-
DSR243 – Pan-Grip 1 gallon kit
$293.00Pan-Grip is a multicomponent novolac based epoxy product that is ideal for residential, commercial and industrial applications. The product is designed to seal and repair corroded and leaking drain pans and surfaces. The product can be used on horizontal and vertical surfaces. The coating is impervious to water, non-rusting, and can be applied directly to a properly cleaned and prepared condensate pan without a primer. Pan-Grip can be applied and will cure under water.
-
RDC086 – 8″ x 6″ Steel Hose Reducer.
$72.008″ x 6″ Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2″ – 12″ Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 8″ diameter hose to ONE 6″ diameter hose.
-
AGR641-08 – 8″ Stiff Button-Lock Brush
$29.008″ Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.