Meyer Machine Supply & Equipment

1-800-728-3828

Home Contact / Visit Us About Us Request Info FAQs Affiliations Shop Online!
Log In to Your Account ------> User Name / Email: Password:

Tools & Accessories


CMP570

5-Stage Desiccant Air Dryer and Oil Separator. This oil separator is an important add-on piece of equipment for your Duct Cleaning or Dryer Vent Cleaning operation. Remove the moisture and vaporized oils from the air stream to prevent freezing air lines in cold weather, recontaminating clean ducts, and spraying moisture into areas that are water sensitive. Desiccant Dryer comes with simple L-Brackets for mounting. 40 micron water removing filter with 9 oz. bowl, sight glass, and overnight drain; .01 micron oil removing filter with 9 oz. bowl, sight glass, and overnight drain; 1 gallon desiccant filter to remove all water; Filter/Regulator with 3 micron filter, 9 oz. bowl, and sight glass to protect the regulator from any desiccant dust, and regulator gauge; Unit comes with ball valve and 1 gallon of desiccant beads.

$850.00


CMP571

Desiccant Refill Material, (4) 1 Gallon Containers. This desiccant changes color as it absorbs water, making it easy to know when a change is necessary. Blue = Dry, Pink = Wet. Reuse this desiccant after baking the moisture out in an oven. Use this refill material with the 5-Stage Desiccant Dryer, CMP570 & CMP575.

$250.00


CMP575

5-Stage Desiccant Air Dryer and Oil Separator with 2-Wheel Cart and Lead Line. This oil separator is an important add-on piece of equipment for your Duct Cleaning or Dryer Vent Cleaning operation. Remove the moisture and vaporized oils from the air stream to prevent freezing air lines in cold weather, recontaminating clean ducts, and spraying moisture into areas that are water sensitive. Desiccant Dryer comes installed on a Custom Made 2-Wheel Cart making your dryer portable. 5' Lead Line provides connection from your air compressor tank to the inlet of the dryer. 40 micron water removing filter with 9 oz. bowl, sight glass, and overnight drain; .01 micron oil removing filter with 9 oz. bowl, sight glass, and overnight drain; 1 gallon desiccant filter to remove all water; Filter/Regulator with 3 micron filter, 9 oz. bowl, and sight glass to protect the regulator from any desiccant dust, and regulator gauge; Unit comes with ball valve and 1 gallon of desiccant beads.

$1250.00


DPL001

1" diameter duct plugs. These hard plastic duct plugs fit inside a 1" hole, in sheet metal from #16 - #30 gauge. Plugs fit flush on flat surfaces and are not compatible with round duct work. 500 per package.

$38.00


DPL002

2-1/2" diameter duct plugs. These soft plastic duct plugs fit inside a 2-1/2" hole, in sheet metal from #16 - #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 16" or larger. 100 per package.

$30.00


DPL003

1" diameter duct plugs. These soft plastic duct plugs fit inside a 1" hole, in sheet metal from #16 - #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6" or larger. 500 per package.

$28.00


DPL005

1" diameter duct plugs. These soft plastic duct plugs fit inside a 1" hole, in sheet metal from #16 - #30 gauge. Plugs fit inside holes on flat surfaces and also work on round ductwork with diameter of 6" or larger. 3,000 per package.

$120.00


ENG016

6-Gallon Fuel Tank. This 6-Gallon Fuel tank has a vented lid and quick disconnect for use with power vacuums such as The General and Ranger.

$59.00


GAR007

CONTRACTOR TOOL APRON WITH TWO POUCHES. Use this Two-Pouch Contractor Apron on any cleaning or restoration job. Duct Cleaning technicians find the pouches great for holding duct plugs, cleaning tools, and small items. Apron straps fit technicians of all sizes.

$8.00


GEN007

Dust Bucket and Clamp. The General and Ranger Duct Cleaning Vacuums use this Dust Bucket and Clamp under the filter bag to collect dirt and debris. This heavy duty bucket and clamp allow for easy clean up after duct cleaning jobs. Use a trash liner to collect debris for easy removal. Bucket and Clamp are only sold together.

$95.00


GEN930

OSHA/EPA/CARB Compliant 6-Gallon Fuel Cell Retro-Fit Kit for General, Ranger, and Major Power Vacuums. The bolt-on fuel cell kit comes with drill templates for retro-fit on older vacuums, new vacuums are pre-drilled and ready for installation. The kit includes a 6-gallon Flambeau tank with carbon cannister, a heavy duty frame, the required hoses, and all the necessary hardware. Installation of this kit removes the necessity of detatchable fuel cells and any quick-disconnect fittings. Add this item to your new vacuum purchase.

$325.00


HCT001

2" - 12" Hole Cutter. Cut a perfect circle in up to #20 gauge sheet metal with this tool. Connect your duct cleaning vacuum hose to a round hole with a Snap Adaptor for ideal airflow.

$57.00


HCT002

Replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut.

$11.00


HCT010

6-Pack of replacement cutting bit for Adjustable Hole Cutter. Use this Bit to make the perfect cut. Purchase in a 6-Pack and save more than 10%.

$57.00


HCT013

Lenox/Hilmor Aviation Tin Snips, LEFT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn't permit.

$22.95


HCT014

Lenox/Hilmor Aviation Tin Snips, RIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn't permit.

$22.95


HCT015

Lenox/Hilmor Aviation Tin Snips, STRAIGHT. Professional quality hand tools are a must on the job site. Never be without a pair of snips for cutting through sheet metal when power tools are not avaiable or the job doesn't permit.

$22.95


HCT016

Lenox/Hilmor 3-Blade Sheet Metal Crimper. Professional quality hand tools are a must on the job site. Never be without a set of crimpers when duct/pipe fitting is part of your job. Use the 3-Blade Crimpers to fit same-size sheet metal snap-lock pipe end to end with ease.

$22.95


HCT017

Lenox/Hilmor 3 inch Seamer. Professional quality hand tools are a must on the job site. Never be without a set of seamers when duct/pipe fitting is part of your job. Use the 3 inch Seamer to make small sheet metal bends and simple fabrications.

$44.95


HCT018

Lenox/Hilmor 1 inch V-Notcher. Professional quality hand tools are a must on the job site. Never be without a set of notchers when duct/pipe fitting is part of your job. Use the 1 inch notcher to make small sheet metal notches for simple fabrications.

$34.95


HCT019

Lenox/Hilmor Duct Knife. Professional quality hand tools are a must on the job site. Never be without a dual sided, specially purposed Duct Knife when the job requires. Make clean cuts through duct insulation or duct board.

$25.00


HCT020

Lenox/Hilmor 12-in-1 Fin Comb. Professional quality hand tools are a must on the job site. Never clean or maintain a cooling coil without repairing damaged fins. Use the 12-in-1 Fin Comb to straighten bent over fins, restoring coil efficiecy.

$20.00


HCT021

Lenox/Hilmor 1/4 & 5/16 Quick-Change Nut Driver. Professional quality hand tools are a must on the job site. Never be without a professional nut driving tool to remove and install the most common sized screw heads in the HVAC industry.

$25.00


HCT022

Lenox/Hilmor 9-in-1 Ratcheting Multi-Driver. Professional quality hand tools are a must on the job site. This 9-in-1 driver tool puts the most common driver bits in the HVAC industry at your fingertips.

$30.00


HCT023

Lenox/Hilmor Pipe Duct Cutter. Professional quality hand tools are a must on the job site. Never be without a pipe duct cutter when pipe/duct fitting is part of your job. Use the pipe/duct cutter to make simple cuts of snap-lock duct/pipe.

$40.00


HCT024

Lenox/Hilmor 6-in-1 Stubby Multi-Driver. Professional quality hand tools are a must on the job site. This 6-in-1 driver tools puts some of the most common driver bits at your finger tips in a STUBBY Style driver.

$12.50


HCT025

Lenox/Hilmor Duct Cleaning HVAC Tool Bag. Keep the tools you need in a high quality bag, that has a spot for everything. This tool bag is sewn of high deneir fabric with H-D seams and a solid base. Dual-Side access allows for easy use and NO-DIG tool access. Unfortunately, tools not included.

$95.00


HSW001

1" Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 1" holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8" or larger chuck.

$14.00


HSW002

Hole Saw Arbor Replacement Bit. Use this Lenox hole saw arbor replacement bit on HSW001 and HSW003 Bi-Metal Hole Saws.

$6.00


HSW003

2-1/2" Lenox Bi-Metal Hole Saw. This tough hole saw is great for making 2-1/2" holes in sheet metal, wood, or other fibrous materials. This hole saw comes complete with pilot bit and fits in any drill with a 3/8" or larger chuck.

$24.00


PAT001

10-1/2" x 10-1/2" Folded Edge Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle. Perfect for covering 8" Hose Connections, to the NADCA Standard, ACR2013.

$56.25


PAT007

8" x 8" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 6" Hose Connections, to the NADCA Standard, ACR2013.

$25.00


PAT007-100

8" x 8" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in (4) bundles of 25 pieces. Perfect for covering 6" Hose Connections, to the NADCA Standard, ACR2013.

$90.00


PAT007-250

8" x 8" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in (10) bundles of 25 pieces. Perfect for covering 6" Hose Connections, to the NADCA Standard, ACR2013.

$200.00


PAT008

10-1/2" x 10-1/2" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 8" Hose Connections, to the NADCA Standard, ACR2013.

$31.25


PAT008-100

10-1/2" x 10-1/2" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in (4) bundles of 25 pieces. Perfect for covering 8" Hose Connections, to the NADCA Standard, ACR2013.

$115.00


PAT008-250

10-1/2" x 10-1/2" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in (10) bundles of 25 pieces. Perfect for covering 8" Hose Connections, to the NADCA Standard, ACR2013.

$262.50


PAT010

12" x 12" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, purchase 100 or 250 pieces for discounted prices. Perfect for covering 10" Hose Connections, to the NADCA Standard, ACR2013.

$33.75


PAT010-100

12" x 12" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in (4) bundles of 25 pieces. Perfect for covering 10" Hose Connections, to the NADCA Standard, ACR2013.

$125.00


PAT010-250

12" x 12" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in (10) bundles of 25 pieces. Perfect for covering 10" Hose Connections, to the NADCA Standard, ACR2013.

$287.50


PAT011

10-1/2" x 10-1/2" Cross-Broken Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal with a cross-break for extra strength, and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 8" Hose Connections, to the NADCA Standard, ACR2013.

$68.75


PAT012

12" x 12" Cross-Broken Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal with a cross-break for extra strength, and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 10" Hose Connections, to the NADCA Standard, ACR2013.

$71.25


PAT016

16" x 16" Sheet metal duct patch. Patches are pre-cut to size from #26 gauge metal and packaged in bundles of 25 pieces. Need to order more than one bundle, call into the office for quantity discounts. Perfect for covering 12" Hose Connections, to the NADCA Standard, ACR2013.

$62.50


PAT208

8" Removable Duct Access Panel. Useful on commercial jobs and when regualr, tool-free access is necessary, the removable duct access panel provides a NADCA ACR Compliant closure panel with heavy guage galvanized steel, and sealing materials rated to 200 F degrees. Removable duct access panel fits into 8" diameter hole, for use on ductwork up to #16 ga (.059") thickness.

$18.00


PAT210

10" Removable Duct Access Panel. Useful on commercial jobs and when regualr, tool-free access is necessary, the removable duct access panel provides a NADCA ACR Compliant closure panel with heavy guage galvanized steel, and sealing materials rated to 200 F degrees. Removable duct access panel fits into 10" diameter hole, for use on ductwork up to #16 ga (.059") thickness.

$22.00


PAT212

12" Removable Duct Access Panel. Useful on commercial jobs and when regualr, tool-free access is necessary, the removable duct access panel provides a NADCA ACR Compliant closure panel with heavy guage galvanized steel, and sealing materials rated to 200 F degrees. Removable duct access panel fits into 12" diameter hole, for use on ductwork up to #16 ga (.059") thickness.

$26.00


PAT308

8" Pressure Sensitive Adhesive Hinged Duct Access Panel. Useful on commercial jobs and when regualr, tool-free access is necessary, the pressure sensitive adhesive hinged duct access panel provides a NADCA ACR Compliant closure panel with heavy guage galvanized steel, and sealing materials rated to 175 F degrees. Pressure sensitive adhesive hinged duct access panel fits over 8" diameter hole, for use on ductwork up to #16 ga (.059") thickness.

$22.00


PAT310

10" Pressure Sensitive Adhesive Hinged Duct Access Panel. Useful on commercial jobs and when regualr, tool-free access is necessary, the pressure sensitive adhesive hinged duct access panel provides a NADCA ACR Compliant closure panel with heavy guage galvanized steel, and sealing materials rated to 175 F degrees. Pressure sensitive adhesive hinged duct access panel fits over 10" diameter hole, for use on ductwork up to #16 ga (.059") thickness.

$25.00


PAT312

12" Pressure Sensitive Adhesive Hinged Duct Access Panel. Useful on commercial jobs and when regualr, tool-free access is necessary, the pressure sensitive adhesive hinged duct access panel provides a NADCA ACR Compliant closure panel with heavy guage galvanized steel, and sealing materials rated to 175 F degrees. Pressure sensitive adhesive hinged duct access panel fits over 12" diameter hole, for use on ductwork up to #16 ga (.059") thickness.

$28.00


PAT408

8" Pressure Sensitive Adhesive Cam-Lock Duct Access Panel. Useful on commercial jobs and when regualr, tool-free access is necessary, the pressure sensitive adhesive cam-lock duct access panel provides a NADCA ACR Compliant closure panel with heavy guage galvanized steel, and sealing materials rated to 175 F degrees. Pressure sensitive adhesive cam-lock duct access panel fits over 8" diameter hole, for use on ductwork up to #16 ga (.059") thickness.

$22.00


PAT410

10" Pressure Sensitive Adhesive Cam-Lock Duct Access Panel. Useful on commercial jobs and when regualr, tool-free access is necessary, the pressure sensitive adhesive cam-lock duct access panel provides a NADCA ACR Compliant closure panel with heavy guage galvanized steel, and sealing materials rated to 175 F degrees. Pressure sensitive adhesive cam-lock duct access panel fits over 10" diameter hole, for use on ductwork up to #16 ga (.059") thickness.

$25.00


PAT412

12" Pressure Sensitive Adhesive Cam-Lock Duct Access Panel. Useful on commercial jobs and when regualr, tool-free access is necessary, the pressure sensitive adhesive cam-lock duct access panel provides a NADCA ACR Compliant closure panel with heavy guage galvanized steel, and sealing materials rated to 175 F degrees. Pressure sensitive adhesive cam-lock duct access panel fits over 12" diameter hole, for use on ductwork up to #16 ga (.059") thickness.

$28.00


SCR850

Sheet Metal Zip Screws. #8 x 1/2" self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4" hex head and slotted screw driver. 500 per package.

$8.00


SCR851

Sheet Metal Zip Screws. #8 x 1/2" self piercing sheet metal screws easily push through sheet metal duct patches for proper closure of duct work. 1/4" hex head and slotted screw driver. 15,000 per package.

$175.00


SDR001

Lenox 1" Uni-Bit Step Drill. This high quality drill bit cuts through sheet metal in seconds to create holes from 3/8" - 1" diameter. Fits in any drill with 3/8" or larger chuck.

$44.00


TAP001

Aluminum Foil Duct Tape. 2-1/2" x 60 Yards. U/L 181A-P Listed. Perfect for sealing duct work openings, to the NADCA Standard, ACR2013.

$17.00


TAP002

Gray Vinyl Duct Tape. 2" x 60 Yards.

$5.00


TAP005

Vent / Grill Mask Tape. 8" x 200' with 4" perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.

$25.00


TAP005-04

4 ROLLS, Vent / Grill Mask Tape. 8" x 200' with 4" perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.

$90.00


TAP005-08

8 ROLLS, Vent / Grill Mask Tape. 8" x 200' with 4" perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.

$170.00


TAP005-16

16 ROLLS, Vent / Grill Mask Tape. 8" x 200' with 4" perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.

$320.00


TAP005-32

32 ROLLS, Vent / Grill Mask Tape. 8" x 200' with 4" perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.

$520.00


TAP006

Vent / Grill Mask Tape. 24" x 200' with 12" perforation. Use this Vent / Grill Mask Tape to block registers during duct cleanings or sealant application. Blue coloring to film makes this product easy to spot at the end of the job, and light tack allows for easy removal to reduce paint chipping.

$75.00


VAC300

HEPA Filtered Wet/Dry Bucket Vac. The Bucket Vac is the handy HEPA you need for all restoration jobs from air duct cleaning, mold remediation, or attic retrofit. The vacuum head connects to just about any 5 gallon bucket and comes complete with a 7 piece tool kit ( 60" Vacuum Hose, (2)12" Extension Wands, Crevice Tool, Round Brush, Floor Tool, and Bulk/Water Pick-up Tool). Need extra buckets for jobs with extra debris, use VAC302. Use the Bucket Vac to collect lint during a dryer vent cleaning, indoors or outdoors.

$175.00


VAC302

5-Gallon Bucket, Red. The Meyer Machine Bucket is handy for use as a tool bucket, slop sink, washing registers, and use on the HEPA Filtered Bucket Vac, VAC300. Carry extra 5-Gallon buckets on your truck for the unknown dirty job that requires haul-out.

$10.00


VAC304

5-Gallon Bucket Lid with Pour Spout. Use this lid with MME Bucket, VAC302, to seal contamination in bucket after using the bucket vac, or for mixing down chemical concentrates to 5-Gallon quantities.

$7.00


ZBG001

18" diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.

$69.00


ZBG002

26" diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.

$81.00


ZBG003

36" diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.

$105.00


ZBG004

48" diameter zone bag. Use air filled zone bags to split large duct systems into small zones for easier cleaning when airflow is limited. Zone a system to maximize airflow with whatever vacuum you use.

$149.00


ZBG005

18" & 26" Zone Bag Replacement Bladder. Repair your Air Duct Cleaning Inflatable Zone Bag with this heavy-duty replacement bladder. Bladders are designed to work with 18" & 26" Zone Bags. Color of replacement bladder may differ from picture.

$30.00


ZBG006

36" & 48" Zone Bag Replacement Bladder. Repair your Air Duct Cleaning Inflatable Zone Bag with this heavy-duty replacement bladder. Bladders are designed to work with 36" & 48" Zone Bags. Color of replacement bladder may differ from picture.

$35.00