Meyer Machine Supply & Equipment

1-800-728-3828

Home Contact / Visit Us About Us Request Info FAQs Affiliations Shop Online!
Log In to Your Account--> User Name / Email: Password:

Brushing Solutions & Products


AGR601

Residential Button-Lock Rotary Brushing Kit. The Residential Button-Lock Rotary Brushing Kit provides the brushes you'll need to tackle just about every job. The kit includes 20' and 30' drill driven brushing shafts and 9 brushes. Brushes selection outfits you to clean flex duct, round pipe, rectangular duct, dryer vents and more. This rotary brushing cable and system is designed to be used with a clutch enable drill.

$625.00


AGR603

Button-Lock Dryer Vent Rotary Brushing Kit. This kit contains a 30' brushing shaft, and a 4" & 6" abrasive brush. Use this brush kit to chew through the toughest lint clogs and pull them back for containment.

$270.00


AGR611

20' Standard-Duty Residential Button-Lock Rotary Brushing Cable. The AGR611 is part of the AGR6XX series brush system and works with all AGR6XX series button-lock brushes. The Standard-Duty cable is designed for use with brushes 16" in diameter and smaller. The rotating inner core (AGR692) is field replaceable, to allow for minimal down-time in the case of an over-torque breakage. This rotary brushing cable and system is designed to be used with a clutch enable drill. An optional adaptor (AGR689) can be used to connect AGR5XX series twisted wire core brushes.

$175.00


AGR612

30' Standard-Duty Residential Button-Lock Rotary Brushing Cable. The AGR612 is part of the AGR6XX series brush system and works with all AGR6XX series button-lock brushes. The Standard-Duty cable is designed for use with brushes 16" in diameter and smaller. The rotating inner core (AGR692) is field replaceable, to allow for minimal down-time in the case of an over-torque breakage. This rotary brushing cable and system is designed to be used with a clutch enable drill. An optional adaptor (AGR689) can be used to connect AGR5XX series twisted wire core brushes.

$215.00


AGR631-08

8" Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$28.00


AGR632-12

12" Soft Button-Lock Brush. Use this soft bristle brush with the AGR6XX series brush system to clean round and rectangular delicate duct work. The soft bristles on this brush make it ideal for most flexible duct work, and duct work with interior insulation. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$34.00


AGR641-08

8" Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$28.00


AGR642-12

12" Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$34.00


AGR642-16

16" Stiff Button-Lock Brush. Use this stiff bristle brush with the AGR6XX series brush system to clean round and rectangular steel duct work, or dryer vent and other rigid duct work. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$39.00


AGR652-08

8" Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$37.00


AGR652-12

12" Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$39.00


AGR653-24

24" Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods. This brush should be used with a Heavy-Duty Cable ONLY, AGR613-AGR615.

$75.00


AGR653-30

30" Corner Button-Lock Brush. Use this dual bristled brush with the AGR6XX series brush system to clean rectangular steel duct work. The shorter stiff bristles scrub hard on the interior positions of the rectangular duct while the longer soft bristles reach into the corners. Using this brush in both CW & CCW rotation allows for both sides of a corner to be cleaned adequetly. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods. This brush should be used with a Heavy-Duty Cable ONLY, AGR613-AGR615.

$90.00


AGR661-04

4" Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$28.00


AGR661-06

6" Abrasive Button-Lock Brush. Use this agressive and abrasive fibered brush with the AGR6XX series brush system to clean round steel, and other rigid types of duct work. The bristles used in this brush out perform flexible steel bristles, and provide an abrasive grit that is embedded in the fiber to scrub into the duct surface. The agressive bristles in this brush are ideal for chewing up hard dryer lint and other duct debris. AGR6XX series brush cores can be refilled with new bristles as they wear, to reduce the cost of on-going operation. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$29.00


BRE045

3/8" Fiberglass Extension Brush Rod. This is 48" long and provides a rigid extension for duct brushes. Brush rod uses 1/4" NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$8.00


BRE049

3/8" Nylon Extension Brush Rod. This is 48" long and provides a flexible extension for duct brushes. Brush rod uses 1/4" NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$14.00


BRE050

5/16" Nylon Extension Brush Rod. This is 48" long and provides a very flexible extension for duct brushes. Brush rod uses a 5/16"-18 threaded connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$11.00


BRE072

3/8" Fiberglass Extension Brush Rod. This is 72" long and provides a rigid extension for duct brushes. Brush rod uses 1/4" NPT connection. With the use an optional adaptor(AGR695), AGR6XX brush head can be used with nylon and fiberglass extension rods.

$11.00


TEI013

Teinnova MultiBot HVAC Air Duct Cleaning Multi-Function Robot Package. The MultiBot starts with a sturdy tractor unit with forward and reverse facing 1080p full HD vision. The tractor is communicates with the controls console through 100' of COMs cable that is neatly stored on a stowed away reel in the controls cabinet. Dual Touch-Screen displays provide video controls and tractor function, independent of one another. MultiBot Full Suite Package Includes all available ADD-ON Modules, B360 Adaptive Brushing Module, A100 Air Injection Module, B100 Rotary Brushing Module, S360 Rotary Sealant Module. The MultiBot Full Suite Package is ideal for HVAC Air Duct Cleaners that specialize in Large Commercial and Industrial Cleaning Applications. As a Full Suite Package, Save 10% compared to individual module pricing.

$39460.50


TEI013-1

Teinnova MutliBot Inspection Robot and Controls Console. The MultiBot Inspection Robot features forward and rear facing 1080p full HD vision and can be recorded using the touch-screen display on the controls console. A second touch-screen display allows for tractor function independent of inspection system function. Use this item as a base package for addition Application Modules to clean and seal ductwork with the Teinnova MultiBot.

$25845.00


TEI013-2

Teinnova MutliBot B360 Adaptive Brush Module. The MutliBot B360 Module provides rotary brushing with perimetral movement during air duct cleaning operation. The brush arm rotates with adjustable speed, while it is simultaneously articulating around the perimeter of rectangular ductwork. This application is very effective for deep cleaning of the corners in rectangular ductwork.

$6320.00


TEI013-4

Teinnova MultiBot B100 Rotary Brushing Module. The MultiBot B100 Module provides conventional rotary brushing techniques for cleaning round ductwork in front of the robot tractor.

$3440.00


TEI022

ProTub Chimney, Boiler & Heat Exchanger Brushing Machine. The ProTub Brushing Machine is the ideal rotary brushing drive unit for cleaning chimneys, boiler and heat exchanger tubes. The rotating shaft doubles it's purpose with water injection and rotation speed is variable from 0-900 RPM. The Double Sense Shaft Rotation works in both right and left operation. The wireless remote allows the operator 20 meters reach from the power drive unit for ease of operation on the job-site. A variety of brushes are availalble for round, square pipes measuring up to 16" in diameter.

$4235.00


TEI023

RotAir Electric Brushing Machine. The RotAir Electric Brushing Machine allows the operator to use rotary brushing cleaning techniques on round or rectangular ducts from 8" - 16" in size. The RotAir features the special ProAxis cable protection system that senses brush restriction and cuts rotational power to reduce shaft breakage. The RotAir is controled from the intuitive touch-screen control panel or optional remote control. Features include dual-direction rotation, timed reversal rotation, 5 rotational speed adjustment, and 65' (20M) cable reach.

$8244.50