Meyer Machine Supply & Equipment

1-800-728-3828

Home Contact / Visit Us About Us Request Info FAQs Affiliations Shop Online!
Log In to Your Account ------> User Name / Email: Password:

Vacuum Hose & Connectors


CCV002

Hose Coupling Wrap with Hook & Loop. The Hose Coupling Wrap with Hook & Loop provides a protective wrap around your vacuum hose connections. Are you looking for extra protection around your hose sleeves, use the the Hose Coupling Wrap with Hook & Loop on vacuum hoses from 6" - 12" diameter.

$23.00


CLP004

2" - 12" Adjustable Hose Clamp. Use this 2" - 12" Adjustable Hose Clamp to secure vacuum hoses to inlet collars, duct adaptor collars, hose sleeves & reducers, or any other place you hook vacuum hoses up. This quick clamp allows for 5/16" nut driver or screw driver to tighten, and screw mechanism flips up for quick tighten and release.

$5.00


CLP021

10" Quick Clamp. The 10" Quick Clamp is the fastest way to secure your washable filter bag to the General and Ranger power vacuum. The 10" Quick Clamp fits around collar sizes that measure 10" diameter and comes with a cotter pin for locking.

$22.00


HDG006

6" x 25' Gator Vacuum Hose. 6" Gator Vacuum Hose is black and green with polypropylene construction. 6" Gator hose has a protected wire helix and semi-ribbed bore. 6" Gator Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.

$200.00


HDG008

8" x 25' Gator Vacuum Hose. 8" Gator Vacuum Hose is black and green with polypropylene construction. 8" Gator hose has a protected wire helix and semi-ribbed bore. 8" Gator Hose is ideal for open area insulation removal. Connect your 8" Gator Hose to duct work with the Snap Adpator or Tapered Starter Collar.

$239.00


HDG010

10" x 25' Gator Vacuum Hose. 10" Gator Vacuum Hose is black and green with polypropylene construction. 10" Gator hose has a protected wire helix and semi-ribbed bore. 10" Gator Hose is ideal for open area insulation removal. Connect your 10" Gator Hose to duct work with the Snap Adpator or Tapered Starter Collar.

$287.00


HDV002

2-1/2" x 50' Vaculite Vacuum Hose. 2-1/2" Vaculite Vacuum Hose is all plastic with an exterior helix and semi-smooth bore. 2-1/2" Vaculite Hose is ideal for insulation blowing applications. The semi-smooth bore of the hose helps to further condition material as it tumbles through the hose.

$85.00


HDV003

3" x 50' Vaculite Vacuum Hose. 3" Vaculite Vacuum Hose is all plastic with an exterior helix and semi-smooth bore. 3" Vaculite Hose is ideal for insulation blowing applications. The semi-smooth bore of the hose helps to further condition material as it tumbles through the hose.

$90.00


HDV004

4" x 50' Vaculite Vacuum Hose. 4" Vaculite Vacuum Hose is all plastic with an exterior helix and semi-smooth bore. 4" Vaculite Hose is ideal for reaching into tight spaces for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.

$128.00


HDV006

6" x 25' Vaculite Vacuum Hose. 6" Vaculite Vacuum Hose is polyethylene construction with a wire helix and semi-ribbed bore. 6" Vaculite Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning.

$137.00


HDV008

8" x 25' Vaculite Vacuum Hose. 8" Vaculite Vacuum Hose is polyethylene construction with a wire helix and semi-ribbed bore. 8" Vaculite Hose is ideal for open area insulation removal and extension hose, and hooking up to duct work with a Snap Adaptor or Tapered Starter Collar. Use the 8" Vaculite hose as a discharge hose on your Commando or Colonel.

$170.00


HDV010

10" x 25' Vaculite Vacuum Hose. 10" Vaculite Vacuum Hose is polyethylene construction with a wire helix and semi-ribbed bore. 10" Vaculite Hose is ideal for open area insulation removal and extension hose, and hooking up to duct work with a Snap Adaptor or Tapered Starter Collar. Use the 10" Vaculite hose as a discharge hose on your General or Ranger.

$220.00


HDV012

12" x 25' Vaculite Vacuum Hose. 12" Vaculite Vacuum Hose is polyethylene construction with a wire helix and semi-ribbed bore. 12" Vaculite Hose is ideal for duct cleaning applications with The President, or combining two vacuums like The General and Ranger.

$260.00


HDV108

8" x 25' Voluvent Vacuum Hose. 8" Voluvent Vacuum Hose is polyvinyl chloride construction with a wire helix. The 8" Voluvent Hose is extremely flexible and collapses laterally under vacuum. 8" Voluvent Hose is ideal for use in duct cleaning application with electric HEPA vacuums such as the Electrak series. Connect 8" Voluvent Hose to duct work with a Snap Adaptor or Tapered Starter Collar.

$129.00


HDV110

10" x 25' Voluvent Vacuum Hose. 10" Voluvent Vacuum Hose is polyvinyl chloride construction with a wire helix. The 10" Voluvent Hose is extremely flexible and collapses laterally under vacuum. 10" Voluvent Hose is ideal for use in duct cleaning application with electric HEPA vacuums such as the Electrak series. Connect 10" Voluvent Hose to duct work with a Snap Adaptor or Tapered Starter Collar.

$149.00


HDV112

12" x 25' Voluvent Vacuum Hose. 12" Voluvent Vacuum Hose is polyvinyl chloride construction with a wire helix. The 10" Voluvent Hose is extremely flexible and collapses laterally under vacuum. 12" Voluvent Hose is ideal for use in duct cleaning application with electric HEPA vacuums such as the Electrak series. Connect 12" Voluvent Hose to duct work with a Snap Adaptor or Tapered Starter Collar.

$169.00


HDX006

6" x 25' Flexi-Flow Vacuum Hose. 6" Flexi-Flow Vacuum Hose is polyurethane construction with an ABS helix and smooth bore. 6" Flexi-Flow Hose is ideal for insulation removal, and hooking up in tight spaces for duct cleaning and dryer vent cleaning. The smooth bore of 6" Flexi-Flow Hose makes it the best hose to use on long run insulation and duct cleaning jobs. The polyurethane wall of Flexi-Flow Hose makes it the toughest hose for extreme applications like insulation removal, duct cleaning, soda suck-up, and more.

$220.00


HDX008

8" x 25' Flexi-Flow Vacuum Hose. 8" Flexi-Flow Vacuum Hose is polyurethane construction with an ABS helix and smooth bore. 8" Flexi-Flow Hose is ideal for open area insulation removal, and hooking up in tight spaces for duct cleaning. The smooth bore of 8" Flexi-Flow Hose makes it the best hose to use on long run insulation and duct cleaning jobs. The polyurethane wall of Flexi-Flow Hose makes it the toughest hose for extreme applications like insulation removal, duct cleaning, soda suck-up, and more. Use the 8" Vaculite hose as a discharge hose on your Commando or Colonel, or connect your 8" Flexi-Flow Hose to duct work with the Snap Adpator or Tapered Starter Collar.

$315.00


RDC086

8" x 6" Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2" - 12" Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 8" diameter hose to ONE 6" diameter hose.

$63.00


RDC102

8" x 8" x 10" Y-Hose Splitter. Adapt your vacuum hose run from ONE 10" diameter hose to TWO 8" diameter hoses. Use with the General or Ranger on small duct cleaning jobs to tackle the supply and return side the HVAC System at the same time. Construction is of #16 Ga. Steel for durability and long lasting use with a gloss black powder coat finish. Use 2" - 12" Adjustable Hose Clamps, CLP004, to secure hose to hose collars. This fitting connects ONE 10" diameter hose to TWO 8" diameter hoses. Other sizes are available on Special Order.

$225.00


RDC108

10" x 8" Steel Hose Reducer. Steel Hose Reducers make connecting your hose runs fast and easy. Hose reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss black powder coat finish. Use 2" - 12" Adjustable Hose Clamps, CLP004, to secure hoses to reducer. This reducer connects ONE 10" diameter hose to ONE 8" diameter hose.

$85.00


RDC164

6" x 4" Steel Inlet Reducer. Steel Inlet Reducers make connecting a smaller hose to your vacuum fast and easy. Convert a 6" Inlet into a 4" Inlet. Inlet reducers are constructed of rolled steel. The construction makes for a long lasting product with a gloss red powder coat finish. Use 2" - 12" Adjustable Hose Clamps, CLP004, to secure hose to reducer. This reducer connects to a 6" diameter Vacuum Inlet to ONE 4" diameter hose.

$60.00


SLV004

4" Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 4" hose.

$11.00


SLV006

6" Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 6" hose.

$17.00


SLV008

8" Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 8" hose.

$23.00


SLV010

10" Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 10" hose.

$25.00


SLV012

12" Diameter Hose Sleeve. Connect vacuum hoses for duct cleaning or insulation removal. Sleeve fits inside a 12" hose.

$29.00


STC006

6" Tapered Starter Collar. The 6" Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 6" Tapered Starter Collar to steel duct work.

$60.00


STC008

8" Tapered Starter Collar. The 8" Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 8" Tapered Starter Collar to steel duct work.

$65.00


STC010

10" Tapered Starter Collar. The 10" Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 10" Tapered Starter Collar to steel duct work.

$68.00


STC012

12" Tapered Starter Collar. The 12" Tapered Starter Collar makes connecting your duct cleaning hose to duct work easy. The tapered collar allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. Use self piercing Zip Screws to fasten the flange of the 12" Tapered Starter Collar to steel duct work.

$85.00


STC108

8" Snap Adaptor. The 8" Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 8" Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 8" Snap Adaptor to steel duct work.

$135.00


STC110

10" Snap Adaptor. The 10" Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 10" Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 10" Snap Adaptor to steel duct work.

$140.00


STC112

12" Snap Adaptor. The 12" Snap Adaptor makes connecting your duct cleaning hose to duct work quick & easy. The 12" Snap Adapator has flip-out ears that hold the hose connection flange flush to the duct work surface. The Snap Adaptor allows for a snug hose fit, allowing plenty of space to tighten down with an adjustable clamp, CLP004. For reassurance, use self piercing Zip Screws to fasten the flange of the 12" Snap Adaptor to steel duct work.

$145.00


STC206

6" Floor Vent Hose Adaptor. Use the 6" Floor Vent Hose Adaptor in unconventional air duct cleaning system hook-ups. Down-Flow furnaces that run duct work through slab are hard to get to, but the 6" Floor Vent Hose Adaptor solves the problem. 1" access holes make for easy insertion of cleaning tools.

$175.00


STC208

8" Floor Vent Hose Adaptor. Use the 8" Floor Vent Hose Adaptor in unconventional air duct cleaning system hook-ups. Down-Flow furnaces that run duct work through slab are hard to get to, but the 8" Floor Vent Hose Adaptor solves the problem. 1" access holes make for easy insertion of cleaning tools.

$175.00